3:12 p.m.
I'm still going through Paul Browne's "JBoss Drools Business Rules" and
am using test scenarios now.
What I've noticed is the activation counts displayed on different parts of the screen
don't match. As per the book, I originally had a value for "sales" that
would fire the rule 11 times, then changed the rule to have "no-loop true".
Re-running the test gives the correct 1 activation at the top, but in 2 other places the
old 11 count is still displayed.
I also noticed this behavior when changing the test scenario value of "sales" -
for example, I'd start with a value that would fire 3 times, then change it to one
that would fire 11 times. In the second case, 11 would correctly show at the top, but 3
would incorrectly display in 2 places lower down.
12:31 a.m.
Hi, what version of Guvnor are you using? This definitely looks like a
bug, please file a jira for this please.
Thanks,
Jervis
Scott Mayne wrote:
I'm still going through Paul Browne's "JBoss Drools
Business Rules"
and am using test scenarios now.
What I've noticed is the activation counts displayed on different
parts of the screen don't match. As per the book, I originally had a
value for "sales" that would fire the rule 11 times, then changed the
rule to have "no-loop true". Re-running the test gives the correct 1
activation at the top, but in 2 other places the old 11 count is still
displayed.
I also noticed this behavior when changing the test scenario value of
"sales" - for example, I'd start with a value that would fire 3 times,
then change it to one that would fire 11 times. In the second case, 11
would correctly show at the top, but 3 would incorrectly display in 2
places lower down.
------------------------------------------------------------------------
------------------------------------------------------------------------
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
2:46 a.m.
I get exactly the same behavior, running on 4 different machines, and I
think it is the same bug that I reported last week on Drools version
5.1.1. See the screen shot attached to this JIRA, and add your comments
to it...
https://jira.jboss.org/browse/GUVNOR-636
--------------------------------------------------
David Shields
Division of Clinical Informatics
Department of Community and Family Medicine
Duke University Medical Center
Phone (864) 787-8551
Jervis Liu <jliu(a)redhat.com>
Sent by: rules-users-bounces(a)lists.jboss.org
09/25/2010 01:46 AM
Please respond to
Rules Users List <rules-users(a)lists.jboss.org>
To
Rules Users List <rules-users(a)lists.jboss.org>
cc
Subject
Re: [rules-users] Guvnor: rule fire counts don't match when running
modified test scenario
Hi, what version of Guvnor are you using? This definitely looks like a
bug, please file a jira for this please.
Thanks,
Jervis
Scott Mayne wrote:
I'm still going through Paul Browne's "JBoss Drools
Business Rules"
and am using test scenarios now.
What I've noticed is the activation counts displayed on different
parts of the screen don't match. As per the book, I originally had a
value for "sales" that would fire the rule 11 times, then changed the
rule to have "no-loop true". Re-running the test gives the correct 1
activation at the top, but in 2 other places the old 11 count is still
displayed.
I also noticed this behavior when changing the test scenario value of
"sales" - for example, I'd start with a value that would fire 3 times,
then change it to one that would fire 11 times. In the second case, 11
would correctly show at the top, but 3 would incorrectly display in 2
places lower down.
------------------------------------------------------------------------
------------------------------------------------------------------------
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
9:53 a.m.
Hi David,
I saw your issue and I'm noticing the same behavior with regards to saving changes to
my test scenario. However, I see the count disconnect even after I get changes to save
correctly, close the test scenario tab, reopen it, and then run it again.
My sense is this is a separate issue (something being cached or not updated), but I'll
defer to those with greater knowledge of the code as to whether this is the same as 636.
And to Jervis, I'm using the 5.1 version (released Aug. 2) provided on the main Drools
downloads page.
--- On Mon, 9/27/10, David Shields <david.shields(a)duke.edu> wrote:
From: David Shields <david.shields(a)duke.edu Subject:
Re: [rules-users] Guvnor: rule fire counts don't match when running modified test
scenario
To: "Rules Users List" <rules-users(a)lists.jboss.org Date: Monday, September 27, 2010, 2:46 AM
I get exactly the same behavior, running
on 4 different machines, and I think it is the same bug that I reported
last week on Drools version 5.1.1. See the screen shot attached to
this JIRA, and add your comments to it...
https://jira.jboss.org/browse/GUVNOR-636
--------------------------------------------------
David Shields
Division of Clinical Informatics
Department of Community and Family Medicine
Duke University Medical Center
Phone (864) 787-8551
Jervis Liu <jliu(a)redhat.com
Sent by: rules-users-bounces(a)lists.jboss.org
09/25/2010 01:46 AM
Please respond to
Rules Users List <rules-users(a)lists.jboss.org
To
Rules Users List <rules-users(a)lists.jboss.org
cc
Subject
Re: [rules-users] Guvnor: rule fire
counts don't match when running modified test scenario
Hi, what version of Guvnor are you using? This definitely
looks like a
bug, please file a jira for this please.
Thanks,
Jervis
Scott Mayne wrote:
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
-----Inline Attachment Follows-----
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
I'm still going through Paul Browne's "JBoss Drools
Business
Rules"
and am using test scenarios now.
What I've noticed is the activation counts displayed on different
parts of the screen don't match. As per the book, I originally
had
a
value for "sales" that would fire the rule 11 times, then
changed the
rule to have "no-loop true". Re-running the test gives the
correct 1
activation at the top, but in 2 other places the old 11 count is
still
displayed.
I also noticed this behavior when changing the test scenario value
of
"sales" - for example, I'd start with a value that
would
fire 3 times,
then change it to one that would fire 11 times. In the second case,
11
would correctly show at the top, but 3 would incorrectly display in
2
places lower down.
------------------------------------------------------------------------
------------------------------------------------------------------------
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
10:34 a.m.
New subject: Guvnor: rule fire counts don't match when running modified test scenario
I would also defer to those with greater knowledge, but it is clear that
there are some issues in Guvnor where there is a disconnect between what
is shown on the screen, and what is happening on the back end. We find
this disconnect in a number of different areas and most of the components
of packages. Sometimes you can make a change to a rule, save and check it
in, and then click on "View source" and the source view shows something
different than what shows on the screen.
--------------------------------------------------
David Shields
Division of Clinical Informatics
Department of Community and Family Medicine
Duke University Medical Center
Phone (864) 787-8551
Scott Mayne <smayne(a)webfinancialsolutions.com>
Sent by: rules-users-bounces(a)lists.jboss.org
09/27/2010 10:53 AM
Please respond to
Rules Users List <rules-users(a)lists.jboss.org>
To
Rules Users List <rules-users(a)lists.jboss.org>
cc
Subject
Re: [rules-users] Guvnor: rule fire counts don't match when running
modified test scenario
Hi David,
I saw your issue and I'm noticing the same behavior with regards to saving
changes to
my test scenario. However, I see the count disconnect even after I get
changes to save
correctly, close the test scenario tab, reopen it, and then run it again.
My sense is this is a separate issue (something being cached or not
updated), but I'll
defer to those with greater knowledge of the code as to whether this is
the same as 636.
And to Jervis, I'm using the 5.1 version (released Aug. 2) provided on the
main Drools downloads page.
--- On Mon, 9/27/10, David Shields <david.shields(a)duke.edu> wrote:
From: David Shields <david.shields(a)duke.edu>
Subject: Re: [rules-users] Guvnor: rule fire counts don't match when
running modified test scenario
To: "Rules Users List" <rules-users(a)lists.jboss.org>
Date: Monday, September 27, 2010, 2:46 AM
I get exactly the same behavior, running on 4 different machines, and I
think it is the same bug that I reported last week on Drools version
5.1.1. See the screen shot attached to this JIRA, and add your comments
to it...
https://jira.jboss.org/browse/GUVNOR-636
--------------------------------------------------
David Shields
Division of Clinical Informatics
Department of Community and Family Medicine
Duke University Medical Center
Phone (864) 787-8551
Jervis Liu <jliu(a)redhat.com>
Sent by: rules-users-bounces(a)lists.jboss.org
09/25/2010 01:46 AM
Please respond to
Rules Users List <rules-users(a)lists.jboss.org>
To
Rules Users List <rules-users(a)lists.jboss.org>
cc
Subject
Re: [rules-users] Guvnor: rule fire counts don't match when running
modified test scenario
Hi, what version of Guvnor are you using? This definitely looks like a
bug, please file a jira for this please.
Thanks,
Jervis
Scott Mayne wrote:
I'm still going through Paul Browne's "JBoss Drools
Business Rules"
and am using test scenarios now.
What I've noticed is the activation counts displayed on different
parts of the screen don't match. As per the book, I originally had a
value for "sales" that would fire the rule 11 times, then changed the
rule to have "no-loop true". Re-running the test gives the correct 1
activation at the top, but in 2 other places the old 11 count is still
displayed.
I also noticed this behavior when changing the test scenario value of
"sales" - for example, I'd start with a value that would fire 3 times,
then change it to one that would fire 11 times. In the second case, 11
would correctly show at the top, but 3 would incorrectly display in 2
places lower down.
------------------------------------------------------------------------
------------------------------------------------------------------------
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
-----Inline Attachment Follows-----
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
2:46 a.m.
New subject: Guvnor: rule fire counts don't match when running modified test scenario
I get exactly the same behavior, running on 4 different machines, and I
think it is the same bug that I reported last week on Drools version
5.1.1. See the screen shot attached to this JIRA, and add your comments
to it...
https://jira.jboss.org/browse/GUVNOR-636
--------------------------------------------------
David Shields
Division of Clinical Informatics
Department of Community and Family Medicine
Duke University Medical Center
Phone (864) 787-8551
Scott Mayne <smayne(a)webfinancialsolutions.com>
Sent by: rules-users-bounces(a)lists.jboss.org
09/24/2010 04:12 PM
Please respond to
Rules Users List <rules-users(a)lists.jboss.org>
To
rules-users(a)lists.jboss.org
cc
Subject
[rules-users] Guvnor: rule fire counts don't match when running modified
test scenario
I'm still going through Paul Browne's "JBoss Drools Business Rules" and
am
using test scenarios now.
What I've noticed is the activation counts displayed on different parts of
the screen don't match. As per the book, I originally had a value for
"sales" that would fire the rule 11 times, then changed the rule to have
"no-loop true". Re-running the test gives the correct 1 activation at the
top, but in 2 other places the old 11 count is still displayed.
I also noticed this behavior when changing the test scenario value of
"sales" - for example, I'd start with a value that would fire 3 times,
then change it to one that would fire 11 times. In the second case, 11
would correctly show at the top, but 3 would incorrectly display in 2
places lower down.
[attachment "rule_activation.png" deleted by David
Shields/Dept_CFM/mc/Duke] _______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
5257
days inactive
5260
days old
5 comments
3 participants
participants (3)
-
David Shields -
Jervis Liu -
Scott Mayne