[Fusion 5.4.0] Condition evaluation broken
by Wolfgang Laun
Scenario:
5.4.0, STREAM, fireUntilHalt() run in separate thread, AlertEvent events
inserted every 1 or two seconds.
The following rule should add the oldest AlertEvent that hasn't been
associated with an AlertCluster
to an AlertCluster and store the cluster reference in AlertEvent.cluster
and add an AlertEvent
reference to the cluster's list:
rule "extend AlertCluster"
when
$alertEvent: AlertEvent( cluster == null ) from entry-point "Cluster
Stream"
not( AlertEvent( cluster == null, this before $alertEvent ) from
entry-point "Cluster Stream" )
$cluster: AlertCluster( eval( $cluster.closeEnough( $alertEvent ) ) )
then
modify( $cluster ){
addAlertEvent( $alertEvent ) // add AlertEvent to AlertCluster's
list
}
modify( $alertEvent ){
setCluster( $cluster ) // store reference to containing AlertCluster
}
end
In spite of the constraint "cluster == null" and using modify for updating
the AlertEvent, the rule
fires repeatedly. Even adding "no-loop true" does not avoid this. (A
redundant constraint
testing for the non-occurrence of the AlertEvent in the AlertCluster's List
alertEvent
The rule executes perfectly well with 5.3.0.
I'm aware of Edson's note indicating some synchronization bug in 5.4.0, but
it's hard to imagine
how a lack of synchronization can be responsible for a problem when inserts
occur at a very
low-rate.
13 years, 10 months
Cancelled step ... : there is no doable move. Terminating phase early.
by Michiel Vermandel
Hi,
I see a warning while solving and I don't really know where to start in finding the cause:
Here is the debug output of the solver:
>>> I see that step 0 already results in a hard-score 0 (!?)
INFO : [2012-09-07 14:56:21,969] Solving started: time spend (90), score (null), new best score (null), random seed (0).
DEBUG: [2012-09-07 14:56:22,376] Step index (0), time spend (499), score (0hard/99soft), initialized planning entity (Inspection of 112474.I#0 -1934359865).
DEBUG: [2012-09-07 14:56:22,704] Step index (1), time spend (827), score (0hard/198soft), initialized planning entity (Inspection of 112474.I#1 -1934359864).
DEBUG: [2012-09-07 14:56:22,990] Step index (2), time spend (1113), score (0hard/297soft), initialized planning entity (Inspection of 112474.I#2 -1934359863).
>>> then after a few hundred steps the hard-score starts to drop?!
DEBUG: [2012-09-07 14:56:30,166] Step index (260), time spend (8289), score (0hard/24974soft), initialized planning entity (Inspection of 61457.I#0 1155198787).
DEBUG: [2012-09-07 14:56:30,189] Step index (261), time spend (8312), score (0hard/25049soft), initialized planning entity (Inspection of 61457.I#1 1155198788).
DEBUG: [2012-09-07 14:56:30,210] Step index (262), time spend (8333), score (0hard/25148soft), initialized planning entity (Inspection of 46045.I#0 1313733879).
DEBUG: [2012-09-07 14:56:30,234] Step index (263), time spend (8357), score (-1hard/25223soft), initialized planning entity (Inspection of 46045.I#1 1313733880).
DEBUG: [2012-09-07 14:56:30,255] Step index (264), time spend (8378), score (-1hard/25298soft), initialized planning entity (Inspection of 23226.I#0 1418884381).
DEBUG: [2012-09-07 14:56:30,281] Step index (265), time spend (8403), score (-1hard/25373soft), initialized planning entity (Inspection of 23226.I#1 1418884382).
>>> hardscore keeps dropping
DEBUG: [2012-09-07 14:56:31,672] Step index (321), time spend (9795), score (-15hard/28951soft), initialized planning entity (Inspection of 8748.I#1 1923067852).
DEBUG: [2012-09-07 14:56:31,703] Step index (322), time spend (9826), score (-15hard/29026soft), initialized planning entity (Inspection of 124206.I#0 2065209261).
DEBUG: [2012-09-07 14:56:31,719] Step index (323), time spend (9842), score (-15hard/29101soft), initialized planning entity (Inspection of 124206.I#1 2065209262).
INFO : [2012-09-07 14:56:31,719] Phase constructionHeuristic ended: step total (324), time spend (9842), best score (-15hard/29101soft).
>>> then I get this warning:
WARN : [2012-09-07 14:56:40,252] Cancelled step index (0), time spend (18375): there is no doable move. Terminating phase early.
INFO : [2012-09-07 14:56:40,252] Phase localSearch ended: step total (0), time spend (18375), best score (-15hard/29101soft).
INFO : [2012-09-07 14:56:40,252] Solving ended: time spend (18375), best score (-15hard/29101soft), average calculate count per second (20824).
I know I give little details b ut I don't know what is relevant.
If someone can point me into some direction I can search and provide more info.
Thanks a lot!
Michiel
-----------------
http://www.codessentials.com - Your essential software, for free!
Follow us at http://twitter.com/#!/Codessentials
13 years, 10 months
IntelliFest Drools & jBPM Healthcare Workshop Agenda (San Diego Oct 2012)
by Mark Proctor
IntelliFest Drools & jBPM Healthcare Workshop Agenda (San Diego Oct 2012)
http://blog.athico.com/2012/09/intellifest-drools-jbpm-healthcare.html
------
Yesterday I posted the general Drools & jBPM work shop agenda. This year there is an additional day dedicated to Healthcare professionals, with top keynote speaker Dr Robert Greenes.
The Healthcare day is being chaired by Captain Emory Fry, MD and Dr Davide Sottara.
Monday 22nd October, Bahia Resort Hotel, San Diego. Free Entrance to first 100 registrations.
0900-0925 Introductions and social time
0930-1020 Dr Robert Greenes, Department of Biomedical Informatics, Arizona State University
Key Note : Embedding Decision Support in Clinical Systems
1030-1120 Dr Aziz Boxwala, Division of Biomedical Informatics, University of California
Clinical Decision Support Consortium
1130-1200 Dr Seong Ki Mun, President and CEO of OSEHRA
Open Source Electronic Health Record Agent
1200:1300 Lunch
1300-1350 Captain Emory Fry, MD and Dr Davide Sottara
Socratic Grid : Distributed Decision Support For Heathcare
1400-1450 David Shields, Health ITS, University of Utah
OpenCDS: a Clinical Decision Support Infrastructure Based on Drools
1500-1520 Harold Solbring, Division of Biomedical Informatics, Mayo Clinic
Semantic Wiki
1530-1655 Conor Dowling, Caregraf
Semantic Terminology Services
1600-1620 Dr Xiao Hu, Department of Neurosurgery, University of California
Clinical Decision Support Driven Alarms
1630-1700
Panel Discussion - Collaboration Opportunities
13 years, 10 months
Problems with guvnor 5.3.0
by paco
Hello everybody
My rules work well on guvnor 5.0.1
But when I run on guvnor 5.3.0
I get the following error:
Unable to Analyse Expression int i=0; for(i=0; i< $methode.size(); i++) {
…………………………………………………….; };: [Error: no such identifier: i] [Near : {...
for(i=0; i< $ methode.size(); i++) { ....}] ^ [Line: 2, Column: 11]
Can someone tell me what does not work well?
Thanks
--
View this message in context: http://drools.46999.n3.nabble.com/Problems-with-guvnor-5-3-0-tp4019647.html
Sent from the Drools: User forum mailing list archive at Nabble.com.
13 years, 10 months
Context Sensitivity in DSL
by dme1
Hi,
Is there any way DSLs can be context sensitive when using these in Guvnor?
What I mean is that if I have DSL for the Class/Object and its field, then
after I select the DSL for the Class/Object can I only see the fields
applicable to that Class/Object (by say selecting/checking a flag or better
still while I am on that condition; and show the list of all DSLs when I add
a new condition).
This will help our Business Analysts to code rule more quickly, specially
since we have a lot of business vocabulary which the BAs have to see
(Working Sets for filtering vocabulary is not an option).
Thank,
dme
--
View this message in context: http://drools.46999.n3.nabble.com/Context-Sensitivity-in-DSL-tp4019638.html
Sent from the Drools: User forum mailing list archive at Nabble.com.
13 years, 10 months
Mail System Error - Returned Mail
by Returned mail
The original message was received at Fri, 7 Sep 2012 16:50:17 +0530 from lists.jboss.org [141.14.148.231]
----- The following addresses had permanent fatal errors -----
rules-users(a)lists.jboss.org
----- Transcript of the session follows -----
... while talking to 131.246.23.202:
550 5.1.2 <rules-users(a)lists.jboss.org>... Host unknown (Name server: host not found)
13 years, 10 months
Use of Otherwise in converted decision table in Guvnor.
by Manasi
Hi,
1) I am using new feature of Guvnor 5.4 i.e converting from decision table
in excel format to Guvnor web Decision Table format.
After excel decision table is converted to Guvnor web Decision table format
,I am not able to use *'Otherwise'* feature for rows in guvnor decision
table.
If Guvnor decision table is created manually then only I am able to use
*Otherwise* in rows.
2) Also ,if Guvnor web decision table is created manually then *Otherwise*
in rows can be use only for String literals . Can it be use for Boolean
variables?
Please let me know what steps needs to be taken.
Thanks,
Manasi Damle
--
View this message in context: http://drools.46999.n3.nabble.com/Use-of-Otherwise-in-converted-decision-...
Sent from the Drools: User forum mailing list archive at Nabble.com.
13 years, 10 months
Re: [rules-users] Best model for planning? technicians, airplanes and shifts => insertLogical problems
by Michiel Vermandel
Hey,
Thank you James for your response.
I manage to solve a 324 tasks for 71 candidate technicians in 11 periods in less than 10 minutes.
I did not do much of optimization yet, as I need to look into that part. My knowledge about selectors and tabu-searches and heuristics is still far to limited.
The main effort I made is enhancing the algorithm to give a weight to the planning-enitities (Tasks) and technicians.
It did not seem to influence the solve-time that much, though it had major impact on the final score.
I have no idea why solving sometimes stops before 3600 seconds if hard-score is less than 0.
This is my termination config:
<termination>
<maximumSecondsSpend>3600</maximumSecondsSpend>
<scoreAttained>0hard/-999999soft</scoreAttained>
</termination>
But as POC (proof of concept) I guess I achieved my goal.
One unanswered question from my previous mail:
While rules are running: why do I get planningentities with uninitialized planningvariables (null)?
If "Task" is the planningentity and period is a planningvariable I need to put:
$task : Task(period != null, ... whatever)
Else the rule is executed with period is null, which results in all sorts of trouble, especially when using this planning variable in 'not equals' comparison.
Example of such rule which needs not-null checking:
rule "tasksInSameJobMustBeInSamePeriod"
when
$taskA : Task(period!=null, $id : id, $jobId : jobId, $periodId : periodId )
$taskB : Task(period!=null, id > $id, jobId == $jobId, periodId != $periodId )
then
insertLogical(new IntConstraintOccurrence("tasksInSameJobMustBeInSamePeriod", $taskA, $taskB));
end
Without the (period!=null you get exceptions thrown complaining about constraints in excess.
Any ideas on why this is needed and if it is possible to never get nulls as planningvariable in the rules?
Regards,
Michiel
-----------------
http://www.codessentials.com - Your essential software, for free!
Follow us at http://twitter.com/#!/Codessentials
________________________________
From: James Owen - North Texas <jco(a)kbsc.com>
To: Michiel Vermandel <mvermand(a)yahoo.com>; Rules Users List <rules-users(a)lists.jboss.org>
Sent: Thursday, September 6, 2012 4:30 PM
Subject: Re: [rules-users] Best model for planning? technicians, airplanes and shifts => insertLogical problems
Greetings:
I started at the beginning of this thread and followed along (skipping only a one or two emails) and I was surprised that along the way that the problem grew and grew. There is an excellent discussion of this very situation in the seminal book on expert systems by Girratano and Riley (about chapter 5 or 6) on pattern matching wherein they discuss this very problem with matching multiple patterns of objects. When pattern matching it does matter the order in which you match the objects and their attributes because of the combinatorial explosion. You have only so much memory with which to work and, sooner or later, you will run out of memory.
You can't just throw all of the objects into a bucket willy-nilly and hope for the best results. The returned error may or may not be the one that you thought that it would be. 500 planes or 1,000 planes matched against multiple tasks matched against 12 months matched against multiple weeks matched against multiple shifts matched against … Well, you get the idea. As the list expands, the possibilities expand by the number of possibilities against which it can be matched. The project has to be architected and broken up into proper "chunks" so that it can be digested properly. You don't eat a steak nor an apple in one bite. You take it one bite at a time and chew it slowly and carefully. So it is with a large problem.
Even virtual memory is limited and will die out, as I have seen it done with benchmarks and the WaltzDB benchmark when programmed poorly. When one more item is added to the problem space you must remember that the memory required expands exponentially ever upwards so it is always best to keep the requirements small at all times and move from small sets to small sets, even when you have GigaBytes of RAM these days. Even later when we have TeraBytes, good programming will still be required for good results.
BTW, it seems that the God Father of benchmarks, Dr. Daniel Miranker (formerly of CMU and now at UT Austin) will be speaking at Intellifest 2012 this year. Visit http://www.IntelliFest.org for more details as they develop. They probably have a gathering of some of the best minds of AI this year if anyone would care to attend. Also, if anyone is looking for employment, they are planning on having recruiters there as well.
Shalom
jco
On Sep 3, 2012, at 7:31 AM, Michiel Vermandel wrote:
Ok,
>
>I changed periodId > $periodId back into periodId != $periodId as I already discovered that this change resulted in invalid solutions.
>Though, then I was back to the exception.
>
>I now made another change which seems to be the solution... I think... I hope
>Though, I do not understand the solution myself for 100%
>
>What I did was testing if period is not null:
>
>rule "tasksInSameJobMustBeInSamePeriod"
> when
> $taskA : MaintenanceTask(period!=null, $id : id, $jobId : jobId, $periodId : periodId )
> $taskB : MaintenanceTask(period!=null, id > $id, jobId == $jobId, periodId != $periodId )
> then
> insertLogical(new IntConstraintOccurrence("tasksInSameJobMustBeInSamePeriod", $taskA, $taskB));
>end
>
>I just tried that because all the sudden I tought checking null != null might not be such a good idea.
>I now get the right combinations.
>
>Can you please tell me if this is a correct change?
>
>Once again one of my earlier questions arises: why is a rule tested upon an entity before the planning variables are set?
>Or am I wrong here?
>
>Thanks,
>
>Michiel
>
>
>
>
>-----------------
>http://www.codessentials.com - Your essential software, for free!
>Follow us at http://twitter.com/#!/Codessentials
>
>
>________________________________
> From: Geoffrey De Smet <ge0ffrey.spam(a)gmail.com>
>To: Rules Users List <rules-users(a)lists.jboss.org>
>Sent: Monday, September 3, 2012 2:15 PM
>Subject: Re: [rules-users] Best model for planning? technicians, airplanes and shifts => insertLogical problems
>
>
>
>
>Op 03-09-12 13:59, Michiel Vermandel schreef:
>
>Hi,
>>
>>I'm not keen on spending time on a temp solution if I cannot
estimate - at this time - how much time it will take me to build
it correctly afterwards.
>>Budgets are limited... (as with anyone I guess :-)
>>Once again, it gives me a bad feeling that such a simple setup
is giving me such a hard to solve issue.
>>
Incremental score calculation isn't a simple concept nor easy to implement.
>But I agree that Drools and Planner should shield you from that
complexity and take the heat there.
>Planner already has extensive support to detect score corruption in
incremental score calculation,
>and Drools's compensation action looks promising to take greatly
simply the complexity to the user.
>
>
>I had thought that - given the project is only a very few classes - it would be peanuts for you or any other expert to pinpoint what I'm doing wrong.
>>
I didn't have the time to read all the classes in detail, just glimpsed over them.
>
>
>>Non the less...
>>
>>I tried to have a look again to a number of examples and I
changed my rules, with a positive result!
>>I seem to get the correct solution. But... I do not know if my
changes are valid.
>>I mean, is it possible that I threw a number of possible
solutions away?
>>Maybe this will not show right now but will have it's effect
when numbers grow and possible solutions shrink.
>>
>>So what I did is going from
>>
>>rule "tasksInSameJobMustBeInSamePeriod"
>> when
>> $taskA : MaintenanceTask($id : id, $jobId : jobId,
$periodId : periodId )
>> MaintenanceTask(id != $id, jobId == $jobId, periodId != $periodId ) // <============ a != $a
>> then
>> System.out.println("r3: " + $taskA );
>> insertLogical(new
IntConstraintOccurrence("tasksInSameJobMustBeInSamePeriod",
$taskA));
>>end
>>
>>
>>
>>to
>>
>>
>>rule "tasksInSameJobMustBeInSamePeriod"
>> when
>> $taskA : MaintenanceTask($id : id, $jobId : jobId,
$periodId : periodId )
>>
$taskB:
>
> MaintenanceTask(id > $id,
>>
Good, because if you count the combination task5-task7, you don't want to count the combination task7-task5 too.
>
>jobId == $jobId, periodId > $periodId ) // <================ a > $a
>>
Bad, keep this on periodId != $periodId (or even period != $period)
>
> then
>> System.out.println("r3: " + $taskA );
>> insertLogical(new
IntConstraintOccurrence("tasksInSameJobMustBeInSamePeriod",
$taskA));
>>
Add $taskB too:
>insertLogical(new IntConstraintOccurrence("tasksInSameJobMustBeInSamePeriod", $taskA, $taskB));
>
>end
>>
>>
>>Can you please tell me if this is THE solution or a dangerous move that works out now but will give issues when numbers grow?
>>
The id > $id change is good, the periodId != $periodId isn't.
>
>The above fixes could explain score corruption. You no longer get
any exceptions in environmentMode DEBUG or TRACE?
>
>Keep looking at the examples: they work and they scale.
>Keep providing feedback as to the pain points too of course.
>
>Hope that helps.
>
>
>>
>>Thanks a lot.
>>
>>
>>Michiel
>>
>>
>>-----------------
>>http://www.codessentials.com - Your essential software, for free!
>>Follow us at http://twitter.com/#!/Codessentials
>>
>>
>>________________________________
>> From: Geoffrey De Smet <ge0ffrey.spam(a)gmail.com>
>>To: Michiel Vermandel <mvermand(a)yahoo.com>; Rules Users List <rules-users(a)lists.jboss.org>
>>Sent: Monday, September 3, 2012 11:56 AM
>>Subject: Re: Best model for planning? technicians, airplanes and shifts => insertLogical problems
>>
>>
>>
>>
>>Op 03-09-12 11:30, Michiel Vermandel schreef:
>>
>>I did not really start on one example. I have scrolled through several to try to figure out how to do it, then started from scratch for the POJO's and Rules.
>>>
>>>The config file was copies from one of the examples because it contained too many things that were hard to get right in the beginning.
>>>I know that is a risk but I needed to start somewhere.
>>>
>>>
I am thinking how to standardize the getting started with planner experience.
>>The cloud balance quick start is the example I pushing
at the moment.
>>But for specific use case, it's better to start from an
example that's similar to the user's use case.
>>The trouble is, it's often hard to see which example is
similar and which is not.
>>
>>
>>>
>>>3) What does "The workingMemory has 2 ConstraintOccurrence(s) in excess:" really mean?
>>> - Are the constraints there more than once?
No, it means that in a clean WorkingMemory, those 2 ConstraintOccurrences aren't there,
>>but in the incremental WorkingMemory, they are there.
>>So they are in excess: they should have been
automatically retracted by the rule engine, but for some
reason, they are not.
>>
>>Read this section about incremental score calculation to
understand why this complexity is needed:
>> http://docs.jboss.org/drools/release/5.4.0.Final/drools-planner-docs/html...
>>
>>If you just want to prove that a Planner POC works for
now (especially if you're close to giving up),
>>just take a few minutes to switch to a simple Java score
calculator for now:
>> http://docs.jboss.org/drools/release/5.4.0.Final/drools-planner-docs/html...
>>It will be _much_ slower especially when it scales out
(but it should still be faster than anything you can
invent yourself within reasonable time).
>>Once that works fine and you get a good result on your
toy problem and you can scale out to 100+ jobs,
>>then switch back to drools to scale out to 10000+ jobs
and follow the rest of this mail.
>>
>>
>> - has this something to do with the equals and hashcode (which I did implement (see below))?
Likely. The equals/hashcode methods are used of all objects in the causes parameter.
>>It's a design issue in Planner that the planner entity's
equals/hashcode() needs to be used for the
ConstraintOccurrence's causes.
>>Compensation action
>>
>>
>>>
>>> About the compensation action: is it already available on 5.4.0 final? Should I try that?
The plumbing is there in Drools Expert, but in Planner there are no decent examples, supporting code or even complex experiments yet.
>>It's a minefield, probably best to stay out until I get
it done or you have more Planner experience :/
>>
>>
>>>
>>>4) I have been looking to the equals and hashcode, though found many examples that implement solutionEquals and solutionHashcode instead.
>>> Currently I implemented them like this:
>>>
>>> @Override
>>> public int hashCode() {
>>> return id.hashCode(); //(*)
>>> }
>>>
>>> @Override
>>> public boolean equals(Object o) {
>>> if (this == o) {
>>> return true;
>>> }
>>> if (id == null || !(o instanceof
MaintenanceTask)) {
>>> return false;
>>> } else {
>>> MaintenanceTask other =
(MaintenanceTask) o;
>>> return id.equals(other.id);
>>> }
>>> }
>>>
>>>
Looks good
>>
>>
>>>
>>> (*) id is a String property which is passed into the entity object through the constructor and upon cloning it is passed from the clone source to the clone target:
>>> public MaintenanceTask clone() {
>>> System.out.println("Cloning task " + id);
>>> MaintenanceTask clone = new MaintenanceTask(job, id);
>>> clone.period = this.period;
>>> clone.technician = this.technician;
>>> return clone;
>>> }
>>>
Looks good.
>>
>>
>>>
>>>
>>>
>>> I am still confused about:
>>>
>>> - Which ones do I need to implement (equals or solutionEquals, ...)?
because of this code:
>> https://github.com/droolsjbpm/drools-planner/blob/master/drools-planner-c...
>>which is called by drools on insertLogical inserted
objects (see drools expert manual on insertLogical)
>>
>> - Should an entity and a cloned entity have the same result for both equals and hashcode? (I guess so)
Yes, definitely.
>>
>> - Should only the entity objects have such implementations? (Planning variables are never cloned, right?)
>>>
It looks good. Only the entity's are cloned indeed during cloneSolution(): they are the only instances that change during planning.
>>
>>
>>>
>>>
>>>-----------------
>>>http://www.codessentials.com - Your essential software, for free!
>>>Follow us at http://twitter.com/#!/Codessentials
>>>
>>>
>>>________________________________
>>> From: Geoffrey De Smet <ge0ffrey.spam(a)gmail.com>
>>>To: Rules Users List <rules-users(a)lists.jboss.org>
>>>Sent: Monday, September 3, 2012 10:44 AM
>>>Subject: Re: [rules-users] Best model for planning? technicians, airplanes and shifts => insertLogical problems
>>>
>>>Op 03-09-12 10:21, Michiel Vermandel schreef:
>>>> Hi Geoffrey,
>>>>
>>>> Thanks for the support so far.
>>>> I understand that you do not provide full
support on this level.
>>>> Though I have the feeling that this is
really
>>>> - a very basic solution setup
>>>> - a beginners-mistake and since I'm looking
into it now for about 3 days
>>>> (since I started with planner) it seems to
be not obvious to find for a
>>>> beginner.
>>>> So I was trying my luck in offering the
code.
>>>> It could be an opportunity to enrich the
documentation ;-) ;-)
>>>
>>>Good point, the score corruption problem is
often a beginner problem and
>>>it's a PITA. I 'll write some more docs about.
>>>
>>>Do note that your 3 day implementation should be
able to scale out to
>>>10000 planes pretty easily, so hang in there :)
>>>I fear you might have started copying from the
wrong example nqueens (if
>>>you did that) :/ Nurse rostering is a far more
similar to this kind of
>>>problem. I am not sure which example to promote
in the docs: the nqueens
>>>is simple enough to explain things on, but it's
too simple to copy from
>>>for real world stuff :/ Feedback welcome.
>>>
>>>>
>>>>
>>>> Ok,
>>>>
>>>> 1) adding the $t2 results in the same sort
of exception, only
>>>> planningEntity seems different:
>>>>
>>>> with insertLogical(new
>>>>
UnweightedConstraintOccurrence("tasksInSameJobMustBeInSamePeriod",
$t1,
>>>> $t2));
>>>>
>>>> Exception in thread "main"
java.lang.IllegalStateException: Score
>>>> corruption: the workingScore (-2) is not
the uncorruptedScore (0):
>>>> The workingMemory has 2
ConstraintOccurrence(s) in excess:
>>>>
tasksInSameJobMustBeInSamePeriod/NEGATIVE_HARD:[Maintenance
of
>>>> Boeing 737 - PJ23.I#1 73111693, Maintenance
of Boeing 737 - PJ23.I#2
>>>> 427578167]
>>>>
tasksInSameJobMustBeInSamePeriod/NEGATIVE_HARD:[Maintenance
of
>>>> Boeing 737 - PJ23.I#2 427578167,
Maintenance of Boeing 737 - PJ23.I#1
>>>> 73111693]
>>>> Check the score rules who created those
ConstraintOccurrences. Verify
>>>> that each ConstraintOccurrence's causes and
weight is correct.
>>>> at
>>>>
org.drools.planner.core.score.director.AbstractScoreDirector.assertWorkingScore(AbstractScoreDirector.java:101)
>>>> at
>>>>
org.drools.planner.core.constructionheuristic.greedyFit.decider.DefaultGreedyDecider.doMove(DefaultGreedyDecider.java:110)
>>>> at
>>>>
org.drools.planner.core.constructionheuristic.greedyFit.decider.DefaultGreedyDecider.decideNextStep(DefaultGreedyDecider.java:78)
>>>> at
>>>>
org.drools.planner.core.constructionheuristic.greedyFit.DefaultGreedyFitSolverPhase.solve(DefaultGreedyFitSolverPhase.java:63)
>>>> at
>>>>
org.drools.planner.core.solver.DefaultSolver.runSolverPhases(DefaultSolver.java:183)
>>>> at
>>>>
org.drools.planner.core.solver.DefaultSolver.solve(DefaultSolver.java:151)
>>>> at
>>>>
be.axi.planner.domain.MaintenancePlanning.main(MaintenancePlanning.java:27)
>>>>
>>>> with insertLogical(new
>>>>
UnweightedConstraintOccurrence("tasksInSameJobMustBeInSamePeriod",
$t1));
>>>>
>>>> Exception in thread "main"
java.lang.IllegalStateException: Score
>>>> corruption: the workingScore (-2) is not
the uncorruptedScore (0):
>>>> The workingMemory has 2
ConstraintOccurrence(s) in excess:
>>>>
tasksInSameJobMustBeInSamePeriod/NEGATIVE_HARD:[Maintenance
of
>>>> Airbus A350 - XJ34.I#2 778813475]
>>>>
tasksInSameJobMustBeInSamePeriod/NEGATIVE_HARD:[Maintenance
of
>>>> Airbus A350 - XJ34.I#0 225744121]
>>>> Check the score rules who created those
ConstraintOccurrences. Verify
>>>> that each ConstraintOccurrence's causes and
weight is correct.
>>>> at
>>>>
org.drools.planner.core.score.director.AbstractScoreDirector.assertWorkingScore(AbstractScoreDirector.java:101)
>>>> at
>>>>
org.drools.planner.core.constructionheuristic.greedyFit.decider.DefaultGreedyDecider.doMove(DefaultGreedyDecider.java:110)
>>>> at
>>>>
org.drools.planner.core.constructionheuristic.greedyFit.decider.DefaultGreedyDecider.decideNextStep(DefaultGreedyDecider.java:78)
>>>> at
>>>>
org.drools.planner.core.constructionheuristic.greedyFit.DefaultGreedyFitSolverPhase.solve(DefaultGreedyFitSolverPhase.java:63)
>>>> at
>>>>
org.drools.planner.core.solver.DefaultSolver.runSolverPhases(DefaultSolver.java:183)
>>>> at
>>>>
org.drools.planner.core.solver.DefaultSolver.solve(DefaultSolver.java:151)
>>>> at
>>>>
be.axi.planner.domain.MaintenancePlanning.main(MaintenancePlanning.java:27)
>>>>
>>>>
>>>> 2) You suggested to replace
UnweightedConstraintOccurrence with
>>>> IntConstraintOccurrence. I will.
>>>> UnweightedConstraintOccurrence is used in
the very basic Queens example
>>>> though...
>>>
>>>Yep, my mistake.
>>>
>>>>
>>>> 3) Where is the best place to read about
what insertLogical and
>>>> IntConstraintOccurrence really do?
>>>> What is the purpose of the Cause -objects,
which should be passed?
>>>> => where is the best place to find
explanation about this?
>>>> (http://docs.jboss.org/drools/release/5.4.0.Final/drools-planner-docs/html...
>>>> doesn't really enlighten me on that part)
>>>
>>>Look for "insertLogical" in the Drools Expert
guide:
>>>
>>>http://docs.jboss.org/drools/release/5.4.0.Final/drools-expert-docs/html_...
>>>
>>>When rules do an insertLogical of an object A,
it's discarded if another
>>>object B in the WorkingMemory equals object A
(through equals() and
>>>through hashcode()). Because the
ConstraintOccurrences need to be unique
>>>so they aren't discarded, they ruleId,
constraintType and causes are
>>>used for equals()/hashcode().
>>>
>>>Future work: "compensation action"
>>>Recently, drools introduced something called
"compensation action",
>>>which can probably replace the use
insertLogical(ConstraintOccurrence)
>>>and make the causes parameter obsolete.
>>>It's also faster.
>>>My first experiments look very promising, but I
haven't got time yet to
>>>experiment with it on all examples and make it
easy for users to use.
>>>
>>>It would allow us to do something like this in
the then part of a rule:
>>> hardAndSoftScoreHelper.addHardScore(-5);
>>>or
>>> hardAndSoftScoreHelper.addSoftScore(- $sum);
>>>or
>>> simpleScoreHelper.addScore(-7);
>>>
>>>No need for causes, insertLogicals, no
equals/hashcode() worries, much
>>>more flexible, ...
>>>
>>>
>>>4) Does your MaintenanceTask implement
equals()/hashcode() other than
>>>Object's original implementation?
>>>
>>>
>>>>
>>>> Thanks in advance.
>>>>
>>>
>>>yw
>>>
>>>_______________________________________________
>>>rules-users mailing list
>>>rules-users(a)lists.jboss.org
>>>https://lists.jboss.org/mailman/listinfo/rules-users
>>>
>>>
>>>
>>>
>>>
>>>_______________________________________________
rules-users mailing list rules-users(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/rules-users
>>
>>
>>
>>
>>
>>_______________________________________________
rules-users mailing list rules-users(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/rules-users
>
>_______________________________________________
>rules-users mailing list
>rules-users(a)lists.jboss.org
>https://lists.jboss.org/mailman/listinfo/rules-users
>
>
>_______________________________________________
>rules-users mailing list
>rules-users(a)lists.jboss.org
>https://lists.jboss.org/mailman/listinfo/rules-users
>
13 years, 10 months
DSL usage in Guvnor
by dme1
Hi,
Do I have to use the Text based DSL Editor in Guvnor if I want to use DSL
which has definition for the Object and the fields within it (using the "-"
at the beginning). If I use this in the Guided editor, it shows are 2
separate rule entries.
Also can I use DSL for defining conditions and actions in a Guided Decision
Table, if yes is there an example which shows how to do this.
Also if I have a Domain Model, and if I use "Enumerations" to define
constraints on some of the fields (map to a list of values), these do not
show up when using DSL based rules in the Guided Editor, is there any way to
get this to work.
Thanks,
dme
--
View this message in context: http://drools.46999.n3.nabble.com/DSL-usage-in-Guvnor-tp4019609.html
Sent from the Drools: User forum mailing list archive at Nabble.com.
13 years, 10 months
