drools-solver results question
by Andrew Waterman
Hello,
I'm starting to work with the drools-solver to help on a gaming
project. Basically, we have a game that works in two modes: 1) a
competitive game where humans (or agents) compete with one another on
a well defined game board to achieve 24 points by using three (or
four) agricultural development tokens. 2. A puzzle, where all 4
players work cooperatively to create an equitable solution, where all
4 players win with at least 24 points by means of our agricultural
development tokens.
I am starting to work with drools-solver to address the puzzle part of
our game. Basically, we are interested in having the solver do two
things for us: a) find the optimal solution for our game/puzzle,
based upon our requirements [this part seems quite straightforward]
and b) getting the total number of solutions that satisfy our
constraints. We would like, as well, to be able to inspect these
other, sub-optimal, solutions, in order to explore our game and puzzle
further. From my reading of the "Solver" API , it looks like we will
only be able to get the optimal solution. Does anyone have any
suggestions for a workaround in this case? Or is there some
functionality in the solver that I am missing?
I look forward to your feedback.
best wishes,
Andrew
---------------------------------
Andrew Waterman
San Cristóbal de las Casas, Chiapas, Mexico
2 weeks, 2 days
Need help with setFocus
by new2drools
Hi All,
Need some help with understanding setFocus.
I have the following use case:
if (condition1) {
if (condition2) {
} else if (condition3) {
} else if (condition 4) {
}
}
if (condition5) {
if (condition2) {
} else if (condition3) {
} else if (condition 4) {
}
}
I created 3 rules (rule2, rule3, rule4) for checking condition2, condition3,
condition4 and
created 1 agenda group (groupX) for them.
I created 2 rules (rule1, rule5) for checking condition1, condition5 and
created 1 agenda group(groupY) for them.
rule "rule1"
agenda-group "groupY"
when
//
then
drools.setFocus("groupX");
end
rule "rule3"
agenda-group "groupX"
activation-group "someActiveGroup"
when
//
then
//
end
>From the java code:
ksession.getAgenda().getAgendaGroup("groupY").setFocus();
Problem: The first time, drools.setFocus("groupX") is invoked, I see that
it's working fine. rule2 or rule3 or rule4 get triggered. But, the SECOND
time that drools.setFocus("groupX") is invoked, I don't see that any rule in
agenda-group groupX is being invoked...even though one of the rule's LHS
explicitly matches...thinking that the activation-group is cancelling all
the activation's (after one rule in that activation group is fired), I even
removed the activation-group statement. But, it didn't help...ideally, I
would like to bunch rule2, rule3, rule4 in one activation group.
Can you please let me know as to why the second invocation of setFocus is
not working? I even tried to remove everything in LHS of rule2/3/4, to see
if the second invocation would work...it doesn't...
Thanks!!
--
View this message in context: http://www.nabble.com/Need-help-with-setFocus-tp24177742p24177742.html
Sent from the drools - user mailing list archive at Nabble.com.
1 month, 1 week
Drools beginner - unable to resolve method using strict-mode
by Stefan Schuster
Hi,
I'm new to drools, and I made my first steps using the very nice
video-tutorial "Build Pong in 13 minutes using JBoss Drools" found here:
http://www.youtube.com/watch?v=Omj4PR3v-nI
Eclipse shows building errors, but Pong start anyway. What does this error
mean?
in move.drl there is following rule:
*<rule "Move Bat Up" timer(expr: bat.speed, bat.speed) no-loop when*
* ui : PongUI( ready == true )*
* ( KeyPressed( keyText == "A" ) and bat : Bat( playerId ==
PlayerId.PlayerOne, y > pconf.padding + pconf.sideLineWidth )*
* or*
* KeyPressed( keyText == "K" ) and bat : Bat( playerId ==
PlayerId.PlayerTwo, y > pconf.padding + pconf.sideLineWidth ) ) *
* td : TableDirty( ) *
*then *
* tableG = ui.getTablePanel().getTableG();*
* tableG.setColor( Color.BLACK ); // background*
* tableG.fillRect( bat.x, bat.y, bat.width, bat.height );*
* *
* modify( bat ) { y = bat.y - 2 };*
* tableG.setColor( Color.WHITE ); // background*
* tableG.fillRect( bat.x, bat.y, bat.width, bat.height ); *
* modify( td ) { dirty = true };*
*end*
the error message is:
[Error: unable to resolve method using strict-mode:
org.drools.spi.KnowledgeHelper.td<http://org.drools.spi.knowledgehelper.td/>
()]
[Near : {... @Modify with( td ) { dirty = true }; ....}]
in another File (ui.drl) TableDirty is defined:
*declare TableDirty*
* @propertyReactive*
* dirty : boolean*
*end*
Any ideas what this error message means? And why can I start pong despite
this error?
Thanks a lot for helping me
Stefan
5 months
conways game of life
by Mark Proctor
For anyone looking for a good and complex example on how to write rules
properly, please look at Conways Game of Life in drools-examples, for
extra bonus points compare it to the old version in M1. You'll see
nearly all the logic is moved from java to the drl and we have removed
the need for nested objects by using objects relaitionally, which also
allows us to exploit cross products to drive the application.
Mark
5 months
Embedding Guvnor 6 Guided Editor
by rjr201
Hi,
I'm looking to upgrade to the new kie workbench 6.. i really need to be able
to embed the guided editor within my application. I've done this previously
using the iframe approach. I can't seem to find any documentation on how to
do this in the latest release. Sorry if i've overlooked any documentation on
this. Any advice would be greatly appreciated..
Cheers.
Rich.
--
View this message in context: http://drools.46999.n3.nabble.com/Embedding-Guvnor-6-Guided-Editor-tp4028...
Sent from the Drools: User forum mailing list archive at Nabble.com.
11 years, 5 months
Usage of the jcr2vfs migration tool
by dstern
Are there instructions anywhere for using the jcr2vfs migration tool?
I pruned my JCR repository (created under Guvnor 5.6.0.Final) until the
migration tool ran without error (which meant archiving all my brl format
assets among other things) but I'm not sure what to do with the output.
I copied the contents of outputVfs to my existing .niogit folder (leaving
the .niogit generated by the migration tool alone) but the migrated
repository doesn't show up. Is this because I didn't replace my existing
.niogit with the one generated by the tool?
--
View this message in context: http://drools.46999.n3.nabble.com/Usage-of-the-jcr2vfs-migration-tool-tp4...
Sent from the Drools: User forum mailing list archive at Nabble.com.
11 years, 6 months
Drools 6.0.1: Pushing changes back to Workbench GIT using SSH
by dotrc
I am using workbench for managing my rules maven projects within the embedded
GIT repository. I am aware that using git:// protocol, I can clone an
existing rule repository; I can do this successfully.
For authoring rules, I want to use Eclipse (using EGit). I want to push my
commits back to the GIT repo. I understand that I'll have to use ssh
protocol instead of git for specifying the repo, something like this:
ssh://{userName}@localhost:8001/{repoName}
When we use a standard GIT repo like stash, it gives us an option to set our
public key on the stash server, but I'm not able to find a way to do that
with the embedded ssh server within workbench. Hence, I'm not able to
authenticate myself and perform a push.
We tried creating a private-public key pair using ssh-keygen and put that
within c:\users\<username>\.ssh and added the public key to
'authorized_keys(2) (though I know this may not be the right place) and then
used the private key as the identity file with ssh client directly from
cygwin, again to no avail.
Any pointers will be really appreciated.
Also, should the username be 'admin' or any other specific one for pushing?
Will the existing Windows username work?
Thanks,
Rishi
--
View this message in context: http://drools.46999.n3.nabble.com/Drools-6-0-1-Pushing-changes-back-to-Wo...
Sent from the Drools: User forum mailing list archive at Nabble.com.
11 years, 6 months
Drools 5.6.0.Final PKG vs DRL infinite loop
by gboro54
We are using drools 5.6.0.Final and the same version of Guvnor. When we run
the source file of a package from Guvnor everything works as expected. When
we take the same rules and create a package we get stuck in an infinite loop
of rules firing(I have a listener logging every time a rule is
created/fired). Why would there be a difference if the rules don't change
between the source and the pkg?
We build the kbase as follows:
KnowledgeBuilderConfiguration config = KnowledgeBuilderFactory
.newKnowledgeBuilderConfiguration();
config.setOption(PropertySpecificOption.ALWAYS);
KnowledgeBuilder kbuilder = KnowledgeBuilderFactory
.newKnowledgeBuilder(config);
for (ResourcePair pair : pairs) {
/* kbuilder.add(
ResourceFactory.newClassPathResource("rule-sets/2014/feb/"+pair.resourceName),
ResourceType.getResourceType(pair.resourceType));*/
kbuilder.add(
ResourceFactory.newClassPathResource(pair.resourceName),
ResourceType.getResourceType(pair.resourceType));
}
KnowledgeBuilderErrors errors = kbuilder.getErrors();
if (errors.size() > 0) {
StringBuilder sb = new StringBuilder();
for (KnowledgeBuilderError error : errors) {
sb.append(error + "\n");
System.out.println(sb);
}
throw new IllegalArgumentException("Could not parse knowledge.
\n"
+ sb);
}
this.knowledgeBase = KnowledgeBaseFactory.newKnowledgeBase();
this.knowledgeBase
.addKnowledgePackages(kbuilder.getKnowledgePackages());
--
View this message in context: http://drools.46999.n3.nabble.com/Drools-5-6-0-Final-PKG-vs-DRL-infinite-...
Sent from the Drools: User forum mailing list archive at Nabble.com.
11 years, 6 months
