4:02 a.m.
Ramesh Reddy [https://community.jboss.org/people/rareddy] created the discussion
"Error during (re) adding connection factory using CLI"
To view the discussion, visit: https://community.jboss.org/message/734622#734622
--------------------------------------------------------------
Hi,
In Teiid, we make use of CLI to create connection factories for tooling purposes. When I
run the following CLI commands
/subsystem=resource-adapters/resource-adapter=wsDS:add(archive=teiid-connector-ws.rar,
transaction-support=NoTransaction)
/subsystem=resource-adapters/resource-adapter=wsDS/connection-definitions=wsDS:add(jndi-name=java:/wsDS,
class-name=org.teiid.resource.adapter.ws.WSManagedConnectionFactory, enabled=true,
use-java-context=true)
/subsystem=resource-adapters/resource-adapter=wsDS/connection-definitions=wsDS/config-properties=EndPoint:add(value={end_point})
/subsystem=resource-adapters/resource-adapter=wsDS:activate
It creates a resource adapter and then creates connection factory, all is good. Now
execute
/subsystem=resource-adapters/resource-adapter=wsDS:remove
the connection factory along with the resource adapter removed. Now re-execute same code
above to re-create the resource adapter and connection factory, it fails with following
message on the AS7 console window
20:48:02,169 ERROR [org.jboss.msc.service.fail] (MSC service thread 1-1) MSC00001: Failed
to start service jboss.ra.deployment."teiid-connector-ws.rar_1":
org.jboss.msc.service.StartException in service
jboss.ra.deployment."teiid-connector-ws.rar_1":
org.jboss.jca.core.spi.mdr.NotFoundException: IJ000855: teiid-connector-ws isn't
registered
at
org.jboss.as.connector.metadata.deployment.ResourceAdapterXmlDeploymentService.start(ResourceAdapterXmlDeploymentService.java:127)
at
org.jboss.msc.service.ServiceControllerImpl$StartTask.startService(ServiceControllerImpl.java:1811)
[jboss-msc-1.0.2.GA.jar:1.0.2.GA]
at
org.jboss.msc.service.ServiceControllerImpl$StartTask.run(ServiceControllerImpl.java:1746)
[jboss-msc-1.0.2.GA.jar:1.0.2.GA]
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
[rt.jar:1.6.0_26]
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
[rt.jar:1.6.0_26]
at java.lang.Thread.run(Thread.java:662) [rt.jar:1.6.0_26]
Caused by: org.jboss.jca.core.spi.mdr.NotFoundException: IJ000855: teiid-connector-ws
isn't registered
at
org.jboss.jca.core.mdr.SimpleMetadataRepository.getResourceAdapter(SimpleMetadataRepository.java:150)
at
org.jboss.as.connector.metadata.deployment.ResourceAdapterXmlDeploymentService.start(ResourceAdapterXmlDeploymentService.java:87)
... 5 more
Can somebody please tell me what I may be doing wrong or is this a bug in code?
Thank you
Ramesh..
--------------------------------------------------------------
Reply to this message by going to Community
[https://community.jboss.org/message/734622#734622]
Start a new discussion in JBoss AS 7 Development at Community
[https://community.jboss.org/choose-container!input.jspa?contentType=1&...]
2:31 p.m.
New subject: [JBoss AS 7 Development] - Re: Error during (re) adding connection factory using CLI
Stefano Maestri [https://community.jboss.org/people/maeste] created the discussion
"Re: Error during (re) adding connection factory using CLI"
To view the discussion, visit: https://community.jboss.org/message/734748#734748
--------------------------------------------------------------
I can't reproduce it on latest master. Can you try to update AS7 to latest master?
regards
S.
--------------------------------------------------------------
Reply to this message by going to Community
[https://community.jboss.org/message/734748#734748]
Start a new discussion in JBoss AS 7 Development at Community
[https://community.jboss.org/choose-container!input.jspa?contentType=1&...]
8:32 p.m.
New subject: [JBoss AS 7 Development] - Re: Error during (re) adding connection factory using CLI
Ramesh Reddy [https://community.jboss.org/people/rareddy] created the discussion
"Re: Error during (re) adding connection factory using CLI"
To view the discussion, visit: https://community.jboss.org/message/734878#734878
--------------------------------------------------------------
Stefano,
I tried with latest nightly (05/09/12) and see the same behavior.
13:26:52,087 ERROR [org.jboss.msc.service.fail] (MSC service thread 1-8) MSC00001: Failed
to start service jboss.ra.deployment."teiid-connector-ws.rar_1":
org.jboss.msc.service.StartException in service
jboss.ra.deployment."teiid-connector-ws.rar_1":
org.jboss.jca.core.spi.mdr.NotFoundException: IJ000855: teiid-connector-ws isn't
registered
at
org.jboss.as.connector.services.resourceadapters.deployment.ResourceAdapterXmlDeploymentService.start(ResourceAdapterXmlDeploymentService.java:128)
at
org.jboss.msc.service.ServiceControllerImpl$StartTask.startService(ServiceControllerImpl.java:1811)
[jboss-msc-1.0.2.GA.jar:1.0.2.GA]
at
org.jboss.msc.service.ServiceControllerImpl$StartTask.run(ServiceControllerImpl.java:1746)
[jboss-msc-1.0.2.GA.jar:1.0.2.GA]
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
[rt.jar:1.6.0_26]
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
[rt.jar:1.6.0_26]
at java.lang.Thread.run(Thread.java:662) [rt.jar:1.6.0_26]
Caused by: org.jboss.jca.core.spi.mdr.NotFoundException: IJ000855: teiid-connector-ws
isn't registered
at
org.jboss.jca.core.mdr.SimpleMetadataRepository.getResourceAdapter(SimpleMetadataRepository.java:150)
at
org.jboss.as.connector.services.resourceadapters.deployment.ResourceAdapterXmlDeploymentService.start(ResourceAdapterXmlDeploymentService.java:88)
... 5 more
13:26:52,194 INFO [org.jboss.as.controller] (management-handler-thread - 1) JBAS014774:
Service status report
JBAS014777: Services which failed to start: service
jboss.ra.deployment."teiid-connector-ws.rar_1":
org.jboss.msc.service.StartException in service
jboss.ra.deployment."teiid-connector-ws.rar_1":
org.jboss.jca.core.spi.mdr.NotFoundException: IJ000855: teiid-connector-ws isn't
registered
Thanks.
Ramesh..
--------------------------------------------------------------
Reply to this message by going to Community
[https://community.jboss.org/message/734878#734878]
Start a new discussion in JBoss AS 7 Development at Community
[https://community.jboss.org/choose-container!input.jspa?contentType=1&...]
8:36 p.m.
New subject: [JBoss AS 7 Development] - Re: Error during (re) adding connection factory using CLI
Jesper Pedersen [https://community.jboss.org/people/jesper.pedersen] created the
discussion
"Re: Error during (re) adding connection factory using CLI"
To view the discussion, visit: https://community.jboss.org/message/734880#734880
--------------------------------------------------------------
Please, attach the resource adapter, or send it to us. TIA
--------------------------------------------------------------
Reply to this message by going to Community
[https://community.jboss.org/message/734880#734880]
Start a new discussion in JBoss AS 7 Development at Community
[https://community.jboss.org/choose-container!input.jspa?contentType=1&...]
8:49 p.m.
New subject: [JBoss AS 7 Development] - Re: Error during (re) adding connection factory using CLI
Ramesh Reddy [https://community.jboss.org/people/rareddy] created the discussion
"Re: Error during (re) adding connection factory using CLI"
To view the discussion, visit: https://community.jboss.org/message/734881#734881
--------------------------------------------------------------
Please see attached. The "dependent-modules" needs to overlayed on the
"modules" directory, then you can deploy the "rar" file.
Thank you.
Ramesh..
--------------------------------------------------------------
Reply to this message by going to Community
[https://community.jboss.org/message/734881#734881]
Start a new discussion in JBoss AS 7 Development at Community
[https://community.jboss.org/choose-container!input.jspa?contentType=1&...]
2:44 p.m.
New subject: [JBoss AS 7 Development] - Re: Error during (re) adding connection factory using CLI
Stefano Maestri [https://community.jboss.org/people/maeste] created the discussion
"Re: Error during (re) adding connection factory using CLI"
To view the discussion, visit: https://community.jboss.org/message/735048#735048
--------------------------------------------------------------
I've opened a bug report and I'm working on it. While I'm solving it, may I
ask you if you really need to remove the resource-adapter and why?
You could leave it there and just call :activate again on it to reapply its configs. You
should be able to edit it too.
It's definitely a bug, and I'm going to solve it, but asking because maybe you are
doing a redundant operation.
regards
S.
--------------------------------------------------------------
Reply to this message by going to Community
[https://community.jboss.org/message/735048#735048]
Start a new discussion in JBoss AS 7 Development at Community
[https://community.jboss.org/choose-container!input.jspa?contentType=1&...]
3:06 p.m.
New subject: [JBoss AS 7 Development] - Re: Error during (re) adding connection factory using CLI
Ramesh Reddy [https://community.jboss.org/people/rareddy] created the discussion
"Re: Error during (re) adding connection factory using CLI"
To view the discussion, visit: https://community.jboss.org/message/735056#735056
--------------------------------------------------------------
Stefano,
This is under Teiid tooling api, as user adds/removes the data models to virtual database
these actions are performed. So, we really do not have total control over it. The issue
surfaced when we tried to add (using CLI)
* two different connection factories under one resource-adapter
* two spearate resource-adapters using the same RAR file but with individual connection
factory inside it
it behaves exactly the same way with same exception. The above is prime usecase in Teiid
as it can have multiple connections of same resource-adapter but to different sources. For
example, different salesforce accounts or different web-services. May be you can also test
above scenarios after your fix.
Also, I really do wish the "activate/enable" and corresponding
"deactivate/disable" at the connection factory level rather than the
resource-adpater level. This would match to the "data sources" behavior. You can
keep the add/remove at the resource-adpater level. Currently IMO, configuration aspects
are mixed with the runtime aspects with "activate/remove" calls, they should be
separate.
Thank you very much for looking into it.
Ramesh..
--------------------------------------------------------------
Reply to this message by going to Community
[https://community.jboss.org/message/735056#735056]
Start a new discussion in JBoss AS 7 Development at Community
[https://community.jboss.org/choose-container!input.jspa?contentType=1&...]
3:18 p.m.
New subject: [JBoss AS 7 Development] - Re: Error during (re) adding connection factory using CLI
Stefano Maestri [https://community.jboss.org/people/maeste] created the discussion
"Re: Error during (re) adding connection factory using CLI"
To view the discussion, visit: https://community.jboss.org/message/735062#735062
--------------------------------------------------------------
Ramesh Reddy wrote:
Stefano,
This is under Teiid tooling api, as user adds/removes the data models to virtual database
these actions are performed. So, we really do not have total control over it. The issue
surfaced when we tried to add (using CLI)
* two different connection factories under one resource-adapter
* two spearate resource-adapters using the same RAR file but with individual connection
factory inside it
it behaves exactly the same way with same exception. The above is prime usecase in Teiid
as it can have multiple connections of same resource-adapter but to different sources. For
example, different salesforce accounts or different web-services. May be you can also test
above scenarios after your fix.
I'llinvestigate. But it's quite strange, it's the primary use case we
was covering w/ resource-adapters. I belive we have also test cases about that, but
I'll be back to you when verified.
Also, I really do wish the "activate/enable" and corresponding
"deactivate/disable" at the connection factory level rather than the
resource-adpater level. This would match to the "data sources" behavior. You can
keep the add/remove at the resource-adpater level. Currently IMO, configuration aspects
are mixed with the runtime aspects with "activate/remove" calls, they should be
separate.
We will see if we can do something in next release. We CAN'T change API at
this stage of course.
regards
S.
--------------------------------------------------------------
Reply to this message by going to Community
[https://community.jboss.org/message/735062#735062]
Start a new discussion in JBoss AS 7 Development at Community
[https://community.jboss.org/choose-container!input.jspa?contentType=1&...]
3:26 p.m.
New subject: [JBoss AS 7 Development] - Re: Error during (re) adding connection factory using CLI
Stefano Maestri [https://community.jboss.org/people/maeste] created the discussion
"Re: Error during (re) adding connection factory using CLI"
To view the discussion, visit: https://community.jboss.org/message/735064#735064
--------------------------------------------------------------
Ramesh Reddy wrote:
Stefano,
This is under Teiid tooling api, as user adds/removes the data models to virtual database
these actions are performed. So, we really do not have total control over it. The issue
surfaced when we tried to add (using CLI)
* two different connection factories under one resource-adapter
* two spearate resource-adapters using the same RAR file but with individual connection
factory inside it
it behaves exactly the same way with same exception. The above is prime usecase in Teiid
as it can have multiple connections of same resource-adapter but to different sources. For
example, different salesforce accounts or different web-services. May be you can also test
above scenarios after your fix.
While I'm fixing the first issue reported, can you paste here command used in
cli for those use cases? It would help me a lot.
regards
S.
--------------------------------------------------------------
Reply to this message by going to Community
[https://community.jboss.org/message/735064#735064]
Start a new discussion in JBoss AS 7 Development at Community
[https://community.jboss.org/choose-container!input.jspa?contentType=1&...]
3:50 p.m.
New subject: [JBoss AS 7 Development] - Re: Error during (re) adding connection factory using CLI
Ramesh Reddy [https://community.jboss.org/people/rareddy] created the discussion
"Re: Error during (re) adding connection factory using CLI"
To view the discussion, visit: https://community.jboss.org/message/735072#735072
--------------------------------------------------------------
Stefano,
Here they are.
* two different connection factories under one resource-adapter
/subsystem=resource-adapters/resource-adapter=wsDS:add(archive=teiid-connector-ws.rar,
transaction-support=NoTransaction)
/subsystem=resource-adapters/resource-adapter=wsDS/connection-definitions=wsOneDS:add(jndi-name=java:/wsOneDS,
class-name=org.teiid.resource.adapter.ws.WSManagedConnectionFactory, enabled=true,
use-java-context=true)
/subsystem=resource-adapters/resource-adapter=wsDS/connection-definitions=wsOneDS/config-properties=EndPoint:add(value={end_point})
/subsystem=resource-adapters/resource-adapter=wsDS:activate
/subsystem=resource-adapters/resource-adapter=wsDS/connection-definitions=wsTwoDS:add(jndi-name=java:/wsTwoDS,
class-name=org.teiid.resource.adapter.ws.WSManagedConnectionFactory, enabled=true,
use-java-context=true)
/subsystem=resource-adapters/resource-adapter=wsDS/connection-definitions=wsTwoDS/config-properties=EndPoint:add(value={end_point})
/subsystem=resource-adapters/resource-adapter=wsDS:activate
* two separate resource-adapters using the same RAR file but with individual connection
factory inside it
/subsystem=resource-adapters/resource-adapter=wsOneDS:add(archive=teiid-connector-ws.rar,
transaction-support=NoTransaction)
/subsystem=resource-adapters/resource-adapter=wsOneDS/connection-definitions=wsOneDS:add(jndi-name=java:/wsOneDS,
class-name=org.teiid.resource.adapter.ws.WSManagedConnectionFactory, enabled=true,
use-java-context=true)
/subsystem=resource-adapters/resource-adapter=wsOneDS/connection-definitions=wsOneDS/config-properties=EndPoint:add(value={end_point})
/subsystem=resource-adapters/resource-adapter=wsOneDS:activate
/subsystem=resource-adapters/resource-adapter=wsTwoDS:add(archive=teiid-connector-ws.rar,
transaction-support=NoTransaction)
/subsystem=resource-adapters/resource-adapter=wsTwoDS/connection-definitions=wsTwoDS:add(jndi-name=java:/wsTwoDS,
class-name=org.teiid.resource.adapter.ws.WSManagedConnectionFactory, enabled=true,
use-java-context=true)
/subsystem=resource-adapters/resource-adapter=wsTwoDS/connection-definitions=wsTwoDS/config-properties=EndPoint:add(value={end_point})
/subsystem=resource-adapters/resource-adapter=wsTwoDS:activate
Thank you.
Ramesh..
--------------------------------------------------------------
Reply to this message by going to Community
[https://community.jboss.org/message/735072#735072]
Start a new discussion in JBoss AS 7 Development at Community
[https://community.jboss.org/choose-container!input.jspa?contentType=1&...]
4621
days inactive
4622
days old
jboss-dev-forums@lists.jboss.org
9 comments
3 participants
participants (3)
-
Jesper Pedersen -
Ramesh Reddy
-
Stefano Maestri