11:28 p.m.
Hi,
Has anyone tried using a VCS bridge for git with the Drools 6 workbench?
Specifically I am interested in git-p4 so that I can access an existing
maven project that is currently stored in Perforce. Is this use case
supported?
Thanks in advance,
Jean-Philippe
12:45 a.m.
We use JGit and I don’t believe (but could be wrong) it has direct p4 support, like this
git extension offers.
http://git-scm.com/docs/git-p4
However Git is distributed, so just clone and sync a p4 repo with this Git command line
tool and use it as an intermediary. Then merge/mirror this intermediary with our JGit
repo.
Mark
On 22 May 2014, at 22:28, Steinmetz, Jean-Philippe <jpsteinmetz(a)theworkshop.us.com>
wrote:
Hi,
Has anyone tried using a VCS bridge for git with the Drools 6 workbench? Specifically I
am interested in git-p4 so that I can access an existing maven project that is currently
stored in Perforce. Is this use case supported?
Thanks in advance,
Jean-Philippe
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
11:29 p.m.
Hi Mark,
Thanks for the reply. I have tried creating a new repo in the workbench and
then using git-p4 on the command line sync'd perforce to it in the
appropriate .niogit directory (per the git-p4 docs this use case is how you
add p4 to an existing git repo). However, I am not seeing the working files
anywhere. Where does the workbench store the work tree?
Jean-Philippe
On Thu, May 22, 2014 at 3:45 PM, Mark Proctor <mproctor(a)codehaus.org> wrote:
We use JGit and I don’t believe (but could be wrong) it has direct
p4
support, like this git extension offers.
http://git-scm.com/docs/git-p4
However Git is distributed, so just clone and sync a p4 repo with this Git
command line tool and use it as an intermediary. Then merge/mirror this
intermediary with our JGit repo.
Mark
On 22 May 2014, at 22:28, Steinmetz, Jean-Philippe <
jpsteinmetz(a)theworkshop.us.com> wrote:
> Hi,
>
> Has anyone tried using a VCS bridge for git with the Drools 6 workbench?
Specifically I am interested in git-p4 so that I can access an existing
maven project that is currently stored in Perforce. Is this use case
supported?
>
> Thanks in advance,
>
> Jean-Philippe
> _______________________________________________
> rules-users mailing list
> rules-users(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/rules-users
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
12:27 a.m.
don’t touch the .niogit folder. You have your git-p4 repo, that you cloned. Now push it to
the ssh connection of the Guvnor server.
Mark
On 27 May 2014, at 22:29, Steinmetz, Jean-Philippe <jpsteinmetz(a)theworkshop.us.com>
wrote:
Hi Mark,
Thanks for the reply. I have tried creating a new repo in the workbench and then using
git-p4 on the command line sync'd perforce to it in the appropriate .niogit directory
(per the git-p4 docs this use case is how you add p4 to an existing git repo). However, I
am not seeing the working files anywhere. Where does the workbench store the work tree?
Jean-Philippe
On Thu, May 22, 2014 at 3:45 PM, Mark Proctor <mproctor(a)codehaus.org> wrote:
We use JGit and I don’t believe (but could be wrong) it has direct p4 support, like this
git extension offers.
http://git-scm.com/docs/git-p4
However Git is distributed, so just clone and sync a p4 repo with this Git command line
tool and use it as an intermediary. Then merge/mirror this intermediary with our JGit
repo.
Mark
On 22 May 2014, at 22:28, Steinmetz, Jean-Philippe <jpsteinmetz(a)theworkshop.us.com>
wrote:
> Hi,
>
> Has anyone tried using a VCS bridge for git with the Drools 6 workbench?
Specifically I am interested in git-p4 so that I can access an existing maven project that
is currently stored in Perforce. Is this use case supported?
>
> Thanks in advance,
>
> Jean-Philippe
> _______________________________________________
> rules-users mailing list
> rules-users(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/rules-users
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
2:11 a.m.
Hrm okay. Pushing from the git-p4 clone to the workbench doesn't really
help either though. The bridge needs to be bi-directional. Meaning, the
latest changes in perforce should be sync'd into the workbench regularly
and any commits to the workbench need to be pushed back to perforce.
Perhaps instead I need to set up the git-p4 clone as git server itself that
the workbench can clone. If I do that will it push back to that server? or
does the workbench not play nice that way? Also, does the workbench perform
regular fetches on a cloned repo?
On Tue, May 27, 2014 at 3:27 PM, Mark Proctor <mproctor(a)codehaus.org> wrote:
don’t touch the .niogit folder. You have your git-p4 repo, that you
cloned. Now push it to the ssh connection of the Guvnor server.
Mark
On 27 May 2014, at 22:29, Steinmetz, Jean-Philippe <
jpsteinmetz(a)theworkshop.us.com> wrote:
Hi Mark,
Thanks for the reply. I have tried creating a new repo in the workbench
and then using git-p4 on the command line sync'd perforce to it in the
appropriate .niogit directory (per the git-p4 docs this use case is how you
add p4 to an existing git repo). However, I am not seeing the working files
anywhere. Where does the workbench store the work tree?
Jean-Philippe
On Thu, May 22, 2014 at 3:45 PM, Mark Proctor <mproctor(a)codehaus.org>wrote:
> We use JGit and I don’t believe (but could be wrong) it has direct p4
> support, like this git extension offers.
> http://git-scm.com/docs/git-p4
>
> However Git is distributed, so just clone and sync a p4 repo with this
> Git command line tool and use it as an intermediary. Then merge/mirror this
> intermediary with our JGit repo.
>
> Mark
>
> On 22 May 2014, at 22:28, Steinmetz, Jean-Philippe <
> jpsteinmetz(a)theworkshop.us.com> wrote:
>
> > Hi,
> >
> > Has anyone tried using a VCS bridge for git with the Drools 6
> workbench? Specifically I am interested in git-p4 so that I can access an
> existing maven project that is currently stored in Perforce. Is this use
> case supported?
> >
> > Thanks in advance,
> >
> > Jean-Philippe
> > _______________________________________________
> > rules-users mailing list
> > rules-users(a)lists.jboss.org
> > https://lists.jboss.org/mailman/listinfo/rules-users
>
>
> _______________________________________________
> rules-users mailing list
> rules-users(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/rules-users
>
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
2:20 a.m.
You can bi-drection sync git, if you know what you are doing. But these are more GIT Qs,
and better asked on the GIT mailing list. Lot’s of stack exchange entries too for two way
git sync
http://stackoverflow.com/questions/15056327/how-do-i-synchronise-two-remo...
Mark
On 28 May 2014, at 01:11, Steinmetz, Jean-Philippe <jpsteinmetz(a)theworkshop.us.com>
wrote:
Hrm okay. Pushing from the git-p4 clone to the workbench doesn't
really help either though. The bridge needs to be bi-directional. Meaning, the latest
changes in perforce should be sync'd into the workbench regularly and any commits to
the workbench need to be pushed back to perforce. Perhaps instead I need to set up the
git-p4 clone as git server itself that the workbench can clone. If I do that will it push
back to that server? or does the workbench not play nice that way? Also, does the
workbench perform regular fetches on a cloned repo?
On Tue, May 27, 2014 at 3:27 PM, Mark Proctor <mproctor(a)codehaus.org> wrote:
don’t touch the .niogit folder. You have your git-p4 repo, that you cloned. Now push it
to the ssh connection of the Guvnor server.
Mark
On 27 May 2014, at 22:29, Steinmetz, Jean-Philippe <jpsteinmetz(a)theworkshop.us.com>
wrote:
> Hi Mark,
>
> Thanks for the reply. I have tried creating a new repo in the workbench and then
using git-p4 on the command line sync'd perforce to it in the appropriate .niogit
directory (per the git-p4 docs this use case is how you add p4 to an existing git repo).
However, I am not seeing the working files anywhere. Where does the workbench store the
work tree?
>
> Jean-Philippe
>
>
> On Thu, May 22, 2014 at 3:45 PM, Mark Proctor <mproctor(a)codehaus.org> wrote:
> We use JGit and I don’t believe (but could be wrong) it has direct p4 support, like
this git extension offers.
> http://git-scm.com/docs/git-p4
>
> However Git is distributed, so just clone and sync a p4 repo with this Git command
line tool and use it as an intermediary. Then merge/mirror this intermediary with our JGit
repo.
>
> Mark
>
> On 22 May 2014, at 22:28, Steinmetz, Jean-Philippe
<jpsteinmetz(a)theworkshop.us.com> wrote:
>
> > Hi,
> >
> > Has anyone tried using a VCS bridge for git with the Drools 6 workbench?
Specifically I am interested in git-p4 so that I can access an existing maven project that
is currently stored in Perforce. Is this use case supported?
> >
> > Thanks in advance,
> >
> > Jean-Philippe
> > _______________________________________________
> > rules-users mailing list
> > rules-users(a)lists.jboss.org
> > https://lists.jboss.org/mailman/listinfo/rules-users
>
>
> _______________________________________________
> rules-users mailing list
> rules-users(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/rules-users
>
> _______________________________________________
> rules-users mailing list
> rules-users(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/rules-users
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
8:03 p.m.
I think some of my questions are still relevant here. For example, normally
if I need to get the latest changes from a master I would do 'git pull'.
However, the workbench doesn't seem to have any UI for that. For
repositories that are cloned from a remote repo, is the workbench
performing an automatic pull? If not, how do I invoke it? Or is it that the
workbench is always considered master and I should be instead pushing to it?
On Tue, May 27, 2014 at 5:20 PM, Mark Proctor <mproctor(a)codehaus.org> wrote:
You can bi-drection sync git, if you know what you are doing. But
these
are more GIT Qs, and better asked on the GIT mailing list. Lot’s of stack
exchange entries too for two way git sync
http://stackoverflow.com/questions/15056327/how-do-i-synchronise-two-remo...
Mark
On 28 May 2014, at 01:11, Steinmetz, Jean-Philippe <
jpsteinmetz(a)theworkshop.us.com> wrote:
Hrm okay. Pushing from the git-p4 clone to the workbench doesn't really
help either though. The bridge needs to be bi-directional. Meaning, the
latest changes in perforce should be sync'd into the workbench regularly
and any commits to the workbench need to be pushed back to perforce.
Perhaps instead I need to set up the git-p4 clone as git server itself that
the workbench can clone. If I do that will it push back to that server? or
does the workbench not play nice that way? Also, does the workbench perform
regular fetches on a cloned repo?
On Tue, May 27, 2014 at 3:27 PM, Mark Proctor <mproctor(a)codehaus.org>wrote:
> don’t touch the .niogit folder. You have your git-p4 repo, that you
> cloned. Now push it to the ssh connection of the Guvnor server.
> Mark
>
> On 27 May 2014, at 22:29, Steinmetz, Jean-Philippe <
> jpsteinmetz(a)theworkshop.us.com> wrote:
>
> Hi Mark,
>
> Thanks for the reply. I have tried creating a new repo in the workbench
> and then using git-p4 on the command line sync'd perforce to it in the
> appropriate .niogit directory (per the git-p4 docs this use case is how you
> add p4 to an existing git repo). However, I am not seeing the working files
> anywhere. Where does the workbench store the work tree?
>
> Jean-Philippe
>
>
> On Thu, May 22, 2014 at 3:45 PM, Mark Proctor <mproctor(a)codehaus.org>wrote:
>
>> We use JGit and I don’t believe (but could be wrong) it has direct p4
>> support, like this git extension offers.
>> http://git-scm.com/docs/git-p4
>>
>> However Git is distributed, so just clone and sync a p4 repo with this
>> Git command line tool and use it as an intermediary. Then merge/mirror this
>> intermediary with our JGit repo.
>>
>> Mark
>>
>> On 22 May 2014, at 22:28, Steinmetz, Jean-Philippe <
>> jpsteinmetz(a)theworkshop.us.com> wrote:
>>
>> > Hi,
>> >
>> > Has anyone tried using a VCS bridge for git with the Drools 6
>> workbench? Specifically I am interested in git-p4 so that I can access an
>> existing maven project that is currently stored in Perforce. Is this use
>> case supported?
>> >
>> > Thanks in advance,
>> >
>> > Jean-Philippe
>> > _______________________________________________
>> > rules-users mailing list
>> > rules-users(a)lists.jboss.org
>> > https://lists.jboss.org/mailman/listinfo/rules-users
>>
>>
>> _______________________________________________
>> rules-users mailing list
>> rules-users(a)lists.jboss.org
>> https://lists.jboss.org/mailman/listinfo/rules-users
>>
>
> _______________________________________________
> rules-users mailing list
> rules-users(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/rules-users
>
>
>
> _______________________________________________
> rules-users mailing list
> rules-users(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/rules-users
>
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
10:50 a.m.
Today from UI perspectives you can't... but you can do it from external... you can
clone from cli, add an upstream repo, pull and merge changes and push content back.
Regards,
---
Alexandre Porcelli
Principal Software Engineer
Red Hat Business Systems and Intelligence Group
On May 29, 2014, at 7:03 PM, Steinmetz, Jean-Philippe
<jpsteinmetz(a)theworkshop.us.com> wrote:
I think some of my questions are still relevant here. For example,
normally if I need to get the latest changes from a master I would do 'git pull'.
However, the workbench doesn't seem to have any UI for that. For repositories that are
cloned from a remote repo, is the workbench performing an automatic pull? If not, how do I
invoke it? Or is it that the workbench is always considered master and I should be instead
pushing to it?
3619
days inactive
3627
days old
7 comments
3 participants
participants (3)
-
Alexandre Porcelli -
Mark Proctor -
Steinmetz, Jean-Philippe