[Design of Messaging on JBoss (Messaging/JBoss)] - PagingStoreImplTest and PagingStoreIntegrationTest...
by timfox
...seem to contain the same tests.... e.g. testConcurrentPage.
why?
View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4199217#4199217
Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4199217
17 years
- 1
- 0
[Design of Messaging on JBoss (Messaging/JBoss)] - Re: timeToSleep in management tests
by timfox
org.jboss.messaging.tests.integration.management.QueueControlTest still contains Thread.sleep and intermittently fails
View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4199216#4199216
Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4199216
17 years
- 1
- 0
[Design of JBoss ESB] - Re: StartProcessInstanceCommand: Return token id/process ins
by Kevin.Conner＠jboss.com
"Kevin.Conner(a)jboss.com" wrote : Doing this in the current manner is the only way that is guaranteed to work 100% of the time and scales very well.
I should also add that if you believe this is not the case then we need to find out why and fix any issues.
Kev
View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4199173#4199173
Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4199173
17 years
- 1
- 0
[Design of JBoss ESB] - Re: StartProcessInstanceCommand: Return token id/process ins
by Kevin.Conner＠jboss.com
"camunda" wrote : Hence, the interessting question is, with the async flag in place, why should it be changed? What would be the advantage of it?
There are other reasons why a process instance is not guaranteed to work in a synchronous manner on the calling thread, such as timers, human intervention, ESB invocations and possibly others. In general this is not something that the invoker of the process instance can control.
There are also issues when using transactions, especially if a transport such as JMS is used, and resource usage/contention/scaling.
These are all issues that we take into consideration with the current approach.
Kev
View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4199172#4199172
Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4199172
17 years
- 1
- 0
[Design of JBoss ESB] - Re: StartProcessInstanceCommand: Return token id/process ins
by Kevin.Conner＠jboss.com
"burrsutter" wrote : Do you also find the need for synchronous processing within jBPM? Where the calling thread should be blocked as each node (assumes no wait-states) is executed and control is returned to the calling thread when the process instance is completed?
Doing this in the current manner is the only way that is guaranteed to work 100% of the time and scales very well. It also integrates well with transactions, something else that synchronous invocations of the process is not guaranteed to do.
In general you do not know how jBPM will choose to control the process flow. Any action within the process instance can choose to defer processing, whether it is through async, timers, human intervention, invoking ESB services or other possibilities. It just takes one of these to break the integration you are suggesting.
Kev
View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4199171#4199171
Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4199171
17 years
- 1
- 0
[Design of JBoss ESB] - Re: StartProcessInstanceCommand: Return token id/process ins
by Kevin.Conner＠jboss.com
"camunda" wrote : You can set an "expected state" on the jbpm SignalCommand. And I think if you get some really external signal, you need he SignalCommand, or how do you want to get around this?
Unfortunately this is not sufficient to guarantee that the signal does not interfere with the process flow.
"camunda" wrote : Returning the token id when starting a new process instance is indeed an important use case where already some workarounds have been created because it is not there! So I completly support this requirement.
Why token id and not process instance id?
"camunda" wrote : In this thread I think it is a good idea to mention again, that the whole internals of the BpmProcessor are a bit, hmm, let's say hard to understand... Best thing in my eyes is to rewrite it... I wanted to collect issues I have with it but didn't had the time yet...
I completely agree. The BpmProcessor is overly complicated for what it needs to do and could do with simplifying.
Kev
View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4199167#4199167
Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4199167
17 years
- 1
- 0
[Design of JBoss ESB] - Re: StartProcessInstanceCommand: Return token id/process ins
by Kevin.Conner＠jboss.com
"burrsutter" wrote : Cleaning up the callback EPR....
The variable mappings should not have been included in the EPR so we can definitely remove those. The token id, node id and counter are all required to guarantee that the signal does not interfere with the process flow.
"burrsutter" wrote : This is essentially our "cookie" for managing the conversation between ESB & the process instance. This chunk of XML is a bit unwieldy, especially if must go out to a business partner or actual client application. It also requires a custom action to be created.
It is certainly true that something needs to manage any correlation with the external services.
"burrsutter" wrote : An easier to use correlation solution should be created so that it works more like the older model of signal (out of the box action) & token id (a simpler "cookie").
The older signal functionality is broken and token id is not sufficient. There are very good reasons why we rewrote that functionality.
Kev
View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4199165#4199165
Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4199165
17 years
- 1
- 0
[Design of JBoss ESB] - Re: StartProcessInstanceCommand: Return token id/process ins
by Kevin.Conner＠jboss.com
"apestel" wrote : So, they want to expose a second web service on the ESB that allows the requester to get back status on the loan application in process. This status may be stored in a textual jBPM variable or maybe the ESB service returns the root token's current process node name or something. The point is, without the process instance ID that was created with the application submission, how will the status check web service be able to know which process ID to check for intermediate status?
We already agree on returning the process instance and, with that, the status of the process is easy to retrieve. It should also be possible to provide restricted access to variables although it is often cleaner to have the process instance control this.
"apestel" wrote : Currently, the only way to do something like this (that I'm aware of) is with Sync Continuation which means the customer really has to understand the internals of our ESB, has to create a separate replyTo service in the ESB and update the jBPM process to call back to it so that the replyTo service can response to the replyTo endpoint of the original SubmitLoanApplication WS that is basically hanging out there waiting for a reply-to message.
This is the only way for a very good reason, it is the only way that is guaranteed to work in all circumstances. What you have been asking for (and have already been telling customers) is not safe.
"apestel" wrote : I'm sure some of my terminology is wrong there, but the point is that the customer doesn't want to hear about that complexity. They want to just create a SubmitLoanApplication WS, have that service kickoff the jBPM service orchestration, and return a result when the jBPM process finishes.
What they are interested in hearing, however, is that their integration works. Having something that appears to work for simple cases, then breaks once they change things, is not what they want.
Kev
View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4199164#4199164
Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4199164
17 years
- 1
- 0
[Design of JBoss ESB] - Re: StartProcessInstanceCommand: Return token id/process ins
by Kevin.Conner＠jboss.com
"burrsutter" wrote : I do understand the need to maintain the "whole" reply-to EPR as it has the context of the last node which is important. With that said, it is fairly common to have the ESB expose a WS endpoint (using either the 181+SOAPProcessor or XSD based mechanisms) and have the WS provide a response, synchronously to its waiting client.
Sure, but this can already be done.
"burrsutter" wrote : One goal is to orchestrate multiple ESB hosted services and have the "composite" response sent back to the waiting client. In this case, there are no wait states in the jBPM process. This same use case should be achievable via routers as well.
Actually there are wait states, at least one with every invocation of an ESB service.
"burrsutter" wrote : Another goal is to start the business process via a EBWS/SOAPProcessor, return some context variable to the waiting client (e.g process instance id) so that the client can return at some later date to inquiry about the process status, the process instance variables, cancel/kill the process instance or if it is waiting tell it to move forward (aka signal).
Kill is certainly valid, and we have agreed to include that. Signal is not however as there is insufficient information to do this safely.
"burrsutter" wrote : Kevin, I believe that you are very wary of signal because the command doesn't know if the process instance is in a known/consistent state. Signal doesn't take into account that it is possible that another user via some other mechanism has already signaled that same instance. Plus, there are challenges with forks which involve multiple token ids instead of the single process instance id.
Not only forks but loops
"burrsutter" wrote : So I believe the following use cases are valid:
| - Inquiry about a process instances status (running, completed)
| - Inquiry about a process instances variables (get me the order total)
| - Cancel/kill a process instance
Status and killing are certainly valid, I agree with those.
I think we need to discuss the process instance variable scenario further before deciding on that course. It would be restricted to root tokens only (i.e. global variables) and there is absolutely no guarantee of the process state (and therefore variables) when you query it. Having the process instance inform a service would be a cleaner way of handling this scenario.
Kev
View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4199161#4199161
Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4199161
17 years
- 1
- 0
[Design of Messaging on JBoss (Messaging/JBoss)] - Re: JBM 1.4 installation script
by gaohoward
The script need three more files to be in the same dir as the script itself, they are:
jboss-remoting.jar -- the jboss remoting patch version for JBM14
mysql-connector-java-5.0.8-bin.jar -- mysql jdbc driver
jbm-sample-bindings.xml -- service port bindings configure file.
The script only support mysql db, and max nodes for a cluster is 4 (limited by the jbm-sample-bindings.xml). The jbm-sample-bindings.xml and the scripts are given below.
==== install_jbm14.pl ====
| #!/usr/bin/perl
|
| # @ARGV
|
| use Getopt::Long;
| use File::Copy;
| use Archive::Extract;
|
| # print "$#ARGV\n";
|
| my $jbm14_home = '';
| my $jbhome = '';
| my $nodebase = '';
| my $nnode = '';
| my $clustered = '';
| my $db = '';
| my $help = '';
|
| GetOptions('help|?' => \$help, 'jbm14inst=s' => \$jbm14_home, 'jboss-home=s' => \$jbhome, 'node-base=s' => \$nodebase, 'n-node=i' => \$nnode, 'clustered' => \$clustered, 'db=s' => \$db);
|
| if ( ! $jbm14_home )
| {
| $jbm14_home = $ENV{JBM14_HOME};
| }
|
| if ( ! $jbhome )
| {
| $jbhome = $ENV{JBOSS_HOME};
| }
|
| if ( ! $nodebase )
| {
| $nodebase = 'messaging';
| if ( $clustered )
| {
| $nodebase = 'messaging-node';
| }
| }
|
| if ( ! $nnode )
| {
| if ( ! $clustered )
| {
| $nnode = 1;
| }
| else
| {
| $nnode = 2;
| }
| }
|
| if ( ! $db )
| {
| if ( $clustered )
| {
| #cluster must use mysql
| $db = 'mysql';
| }
| }
|
| &validateJBM($jbm14_home);
| &validateJBoss($jbhome);
|
| if ( $clustered )
| {
| setUpClustered($jbhome, $nodebase, $nnode, $jbm14_home, $db);
| }
| else
| {
| setUpSingleNode($jbhome, $nodebase, $jbm14_home, $db);
| }
|
| exit 0;
|
|
| #single node
| #args stored in @_, to access single arg: $_[0,1,2...]
| # $_[0] -- jboss home
| # $_[1] -- node name
| # $_[2] -- jbm home
| # $_[3] -- db name
| sub setUpSingleNode
| {
| print "----Setting up Single Node ----\n";
|
| my $jboss_home = $_[0];
| my $jboss_node = $_[1];
|
| my $nodedir = "$jboss_home/server/$jboss_node";
| createNodeDir($nodedir);
|
| ©DefaultNodeFiles($jboss_home, $nodedir, $_[2]);
|
| &setupDBForSingleNode($_[2], $nodedir, $_[3], $_[0]);
|
| print "----DONE----\n";
| }
|
| #$_[0] -- jbm home
| #$_[1] -- node dir
| #$_[2] -- db name
| #$_[3] -- jboss home
| sub setupDBForSingleNode
| {
| if ( $_[2] eq 'mysql' )
| {
|
| # setup persistence file
| my $oldconfig = "$_[1]/deploy/jboss-messaging.sar/hsqldb-persistence-service.xml";
| unlink $oldconfig;
|
| my $newconfig = "$_[0]/examples/config/mysql-persistence-service.xml";
| $newconfig =~ s/\/\//\//s;
|
| copy($newconfig, "$_[1]/deploy/jboss-messaging.sar") or die "error copy persistence file. $!\n";
|
| # jdbc driver
| my $jdbcDrv = "mysql-connector-java-5.0.8-bin.jar";
| copy($jdbcDrv, "$_[1]/lib") or die "error copy jdbc driver $!\n";
|
| # mysql-ds.xml
| my $mysqlds = "$_[3]/docs/examples/jca/mysql-ds.xml";
| $mysqlds =~ s/\/\//\//s;
|
| unlink "$_[1]/deploy/hsqldb-ds.xml";
| copy($mysqlds, "$_[1]/deploy") or die "error copying mysql-ds.xml. $!\n";
|
| my $dsfile = "$_[1]/deploy/mysql-ds.xml";
| open(my $h_dsfile, "<", $dsfile);
| local $/=undef;
| my $dscontent = <$h_dsfile>;
|
| $dscontent =~ s/MySqlDS/DefaultDS/s;
| $dscontent =~ s/mysql\-hostname:3306\/jbossdb/localhost:3306\/messaging/s;
| $dscontent =~ s/>x</>sa</s;
| $dscontent =~ s/>y</></s;
|
| close $h_dsfile;
| open($h_dsfile, ">", $dsfile);
| print $h_dsfile $dscontent;
| close $h_dsfile;
| }
| else
| {
| if ( $_[2] )
| {
| error("$_[2] is not supported yet.\n");
| }
| }
| }
|
| #clustered nodes
| # $_[0] -- jboss home
| # $_[1] -- node name
| # $_[2] -- node number
| # $_[3] -- jbm home
| # $_[4] -- db name
| sub setUpClustered
| {
| print "----Setting up Clustered nodes ----\n";
| my $jboss_home = $_[0];
| my $node_base_name = $_[1];
| my $node_num = $_[2];
| my $jbm_home = $_[3];
| my $db_name = $_[4];
|
| my $basedir = "$jboss_home/server";
| createNodeDirs($basedir, $node_base_name, $node_num);
|
| copy("jbm-sample-bindings.xml", "$jboss_home/docs/examples") or die "failed to copy jbm-sample-bindings.xml $!\n";
|
| ©ClusteredNodesFiles($jboss_home, $node_base_name, $node_num, $jbm_home);
|
| &setupDBForClusteredNodes($jboss_home, $node_base_name, $node_num, $jbm_home, $db_name);
|
| print "----DONE ----\n";
| }
|
| #$_[0] -- jboss home
| #$_[1] -- node base name
| #$_[2] -- node num
| #$_[3] -- jbm home
| #$_[4] -- db name
| sub setupDBForClusteredNodes
| {
| for (my $i = 0; $i < $_[2]; $i++)
| {
| my $nodename = sprintf("$_[1]%d", $i);
| my $nodedir = "$_[0]/server/$nodename";
|
| &setupDBForSingleClusteredNode($_[3], $nodedir, $_[4], $_[0]);
| }
| }
|
| #$_[0] -- jbm home
| #$_[1] -- node dir
| #$_[2] -- db name
| #$_[3] -- jboss home
| sub setupDBForSingleClusteredNode
| {
| if ( $_[2] eq 'mysql' )
| {
| # setup persistence file
| my $oldconfig = "$_[1]/deploy/jboss-messaging.sar/hsqldb-persistence-service.xml";
| unlink $oldconfig;
|
| my $newconfig = "$_[0]/examples/config/mysql-persistence-service.xml";
| $newconfig =~ s/\/\//\//s;
| print "file: $newconfig\n";
| print "dest: $_[1]/deploy/jboss-messaging.sar\n";
| copy($newconfig, "$_[1]/deploy/jboss-messaging.sar") or die "error copy persistence file. $!\n";
|
| $newconfig = "$_[1]/deploy/jboss-messaging.sar/mysql-persistence-service.xml";
| open(my $h_newconfig, "<", $newconfig);
| local $/=undef;
| my $nccontent = <$h_newconfig>;
|
| #<attribute name="Clustered">false</attribute>
| $oldval = '<attribute name="Clustered">false</attribute>';
| $newval = '<attribute name="Clustered">true</attribute>';
| $nccontent =~ s/$oldval/$newval/s;
|
| close $h_newconfig;
| open($h_newconfig, ">", $newconfig);
| print $h_newconfig $nccontent;
| close $h_newconfig;
|
| # jdbc driver
| my $jdbcDrv = "mysql-connector-java-5.0.8-bin.jar";
| copy($jdbcDrv, "$_[1]/lib") or die "error copy jdbc driver $!\n";
|
| # mysql-ds.xml
| my $mysqlds = "$_[3]/docs/examples/jca/mysql-ds.xml";
| $mysqlds =~ s/\/\//\//s;
|
| unlink "$_[1]/deploy/hsqldb-ds.xml";
| copy($mysqlds, "$_[1]/deploy") or die "error copying mysql-ds.xml. $!\n";
|
| my $dsfile = "$_[1]/deploy/mysql-ds.xml";
| open(my $h_dsfile, "<", $dsfile);
| local $/=undef;
| my $dscontent = <$h_dsfile>;
|
| $dscontent =~ s/MySqlDS/DefaultDS/s;
| $dscontent =~ s/mysql\-hostname:3306\/jbossdb/localhost:3306\/messaging/s;
| $dscontent =~ s/>x</>sa</s;
| $dscontent =~ s/>y</></s;
|
| close $h_dsfile;
| open($h_dsfile, ">", $dsfile);
| print $h_dsfile $dscontent;
| close $h_dsfile;
| }
| else
| {
| error("$_[2] is not supported yet.\n");
| }
| }
|
| #$_[0] -- jboss home
| #$_[1] -- node base name
| #$_[2] -- node num
| #$_[3] -- jbm14_home
| sub copyClusteredNodesFiles
| {
| for (my $i = 0; $i < $_[2]; $i++)
| {
| my $nodename = sprintf("$_[1]%d", $i);
| my $basedir = "$_[0]/server/$nodename";
| ©AllNodeFiles($_[0], $basedir, $_[3], $i);
| }
| }
|
| #$_[0] -- jboss home
| #$_[1] -- node dir
| #$_[2] -- jbm14_home
| #$_[3] -- node id
| sub copyAllNodeFiles
| {
| my $srcnodedir = "$_[0]/server/all";
| my $nodedir = $_[1];
|
| my %ex_dirs = ("jms" => "jms");
| # $hash_list{'jms'} = 'jms';
| my %ex_files = ("jbossmq.jar" => "jbossmq.jar");
|
| copyDir("$srcnodedir/conf", "$nodedir/conf");
| copyDir("$srcnodedir/deploy", "$nodedir/deploy", \%ex_dirs, \%ex_files);
| copyDir("$srcnodedir/lib", "$nodedir/lib", \%ex_dirs, \%ex_files);
| copyDir("$srcnodedir/farm", "$nodedir/farm");
| copyDir("$srcnodedir/deploy-hasingleton", "$nodedir/deploy-hasingleton", \%ex_dirs, \%ex_files);
|
| my $jbm14_dir = $_[2];
|
| copyFile("$jbm14_dir/jboss-messaging.jar", "$nodedir/lib/jboss-messaging.jar");
| copyFile("$jbm14_dir/src/etc/server/default/config", "$nodedir/conf/props");
| copyFile("$srcnodedir/deploy/jms/jms-ra.rar", "$nodedir/deploy/jms-ra.rar");
| # copyFile("$srcnodedir/deploy/jms/jms-ds.xml", "$nodedir/deploy/jms-ds.xml");
| copyFile("$srcnodedir/deploy/jms/hajndi-jms-ds.xml", "$nodedir/deploy/hajndi-jms-ds.xml");
|
| #apply remoting patch
| copy ("jboss-remoting.jar", "$nodedir/lib") or die ("can't copy remoting jar $!");
|
| &extractJarFile("$jbm14_dir/jboss-messaging.sar", "$nodedir/deploy/jboss-messaging.sar");
|
| &handleConfig_MessagingService_cluster("$nodedir/deploy/jboss-messaging.sar/messaging-service.xml", $_[3]);
|
| &handleConfig_JmsDs("$nodedir/deploy/hajndi-jms-ds.xml");
|
| &handleConfig_StandardJBoss("$nodedir/conf/standardjboss.xml");
|
| &handleConfig_JBossService_cluster("$nodedir/conf/jboss-service.xml", $_[3]);
|
| &handleConfig_LoginConfig("$nodedir/conf/login-config.xml");
|
| }
|
| #$_[0] -- jboss-service.xml
| #$_[1] -- node id
| sub handleConfig_JBossService_cluster
| {
| my $jsfile = $_[0];
| open(my $h_jsfile, "<", $jsfile);
|
| local $/=undef;
| my $contents = <$h_jsfile>;
|
| $contents =~ s/(<attribute\sname="JMSService">.*service=DestinationManager<\/attribute>\n)//sg;
|
| my $binding = ' <mbean code="org.jboss.services.binding.ServiceBindingManager"
| name="jboss.system:service=ServiceBindingManager">
| <attribute name="ServerName">portsXX</attribute>
| <attribute name="StoreURL">${jboss.home.url}/docs/examples/jbm-sample-bindings.xml</attribute>
| <attribute name="StoreFactoryClassName">
| org.jboss.services.binding.XMLServicesStoreFactory
| </attribute>
| </mbean>
|
| <!-- ==================================================================== -->
| <!-- Class Loading -->
| <!-- ==================================================================== -->';
|
| my $mark = ' <!-- ==================================================================== -->
| <!-- Class Loading -->
| <!-- ==================================================================== -->';
|
| $contents =~ s/$mark/$binding/s;
| my $port = sprintf("%02d", $_[1] + 1);
|
| $contents =~ s/portsXX/ports\-$port/s;
|
| close $h_jsfile;
| open($h_jsfile, ">", $jsfile);
| print $h_jsfile $contents;
| close $h_jsfile;
| }
|
| #$_[0] -- messaging-service.xml
| #$_[1] -- node id
| sub handleConfig_MessagingService_cluster
| {
| my $msfile = $_[0];
|
| open(my $h_msfile, "<", $msfile);
|
| local $/=undef; #make the whole contents into string.
| my $contents = <$h_msfile>;
| my $suckpasswd = '<attribute name="SuckerPassword">suckerforclusterjbm</attribute>';
| $contents =~ s/(<\!--\s*The password.*attribute>\s*-->)/$suckpasswd/s;
|
| #server peer id
| $contents =~ s/>\$\{jboss.messaging.ServerPeerID:0\}</>$_[1]</s;
|
| close $h_msfile;
| open($h_msfile, ">", $msfile);
|
| print $h_msfile $contents;
| close $h_msfile;
| }
|
|
| #$_[0] -- base dir
| #$_[1] -- node base
| #$_[2] -- node number
| sub createNodeDirs
| {
| for (my $i = 0; $i < $_[2]; $i++)
| {
| my $nodename = sprintf("$_[1]%d", $i);
| my $nodedir = "$_[0]/$nodename";
| &createNodeDir($nodedir);
| }
| }
|
| #$_[0] -- the dir
| sub createNodeDir
| {
| my $thedir = $_[0];
| if ( -e $thedir )
| {
| &error("the dir $thedir already exists!\n");
| }
| $result = mkdir $thedir;
| }
|
| #$_[0] -- JBoss Messaging 1.4 installation base
| sub validateJBM()
| {
| if ( ! $_[0] )
| {
| &error("JBoss Messaging 1.4 installation base is not specified!\n");
| }
| if ( (-e $_[0]) && (-d $_[0]) )
| {
| #jars and sars must exist
| if ( (-e "$_[0]/jboss-messaging.jar") && (-e "$_[0]/jboss-messaging.sar") && (-e "$_[0]/jboss-messaging-client.jar") )
| {
| print "JBM installation OK.\n";
| }
| else
| {
| &error("Not a valid JBM14 installation, the jboss-messaging.jar, jboss-messaging-client.jar and jboss-messaging.sar must exist!\n");
| }
| }
| else
| {
| &error("JBoss Messaging 1.4 installation base doesn't exist!\n");
| }
| }
|
| #check the right location and version
| #make sure the node not created alread, if so, exit.
| #usage: validateJBoss(jbosshome, nodename, num of nodes);
| sub validateJBoss
| {
| if ( ! -e "$_[0]/bin/run.jar" )
| {
| &error("$_[0] is Not a valid JBoss Installation!\n");
| }
| }
|
| sub error
| {
| print " \n*** $_[0]\n";
| &usage;
| exit 0;
| }
|
| #$_[0] -- jboss home
| #$_[1] -- node dir
| #$_[2] -- jbm14_home
| sub copyDefaultNodeFiles
| {
| my $srcnodedir = "$_[0]/server/default";
| my $nodedir = $_[1];
|
| my %ex_dirs = ("jms" => "jms");
| # $hash_list{'jms'} = 'jms';
| my %ex_files = ("jbossmq.jar" => "jbossmq.jar");
|
| copyDir("$srcnodedir/conf", "$nodedir/conf");
| copyDir("$srcnodedir/deploy", "$nodedir/deploy", \%ex_dirs, \%ex_files);
| copyDir("$srcnodedir/lib", "$nodedir/lib", \%ex_dirs, \%ex_files);
|
| my $jbm14_dir = $_[2];
|
| copyFile("$jbm14_dir/jboss-messaging.jar", "$nodedir/lib/jboss-messaging.jar");
| copyFile("$jbm14_dir/src/etc/server/default/config", "$nodedir/conf/props");
| copyFile("$srcnodedir/deploy/jms/jms-ra.rar", "$nodedir/deploy/jms-ra.rar");
| copyFile("$srcnodedir/deploy/jms/jms-ds.xml", "$nodedir/deploy/jms-ds.xml");
| # copyFile("$srcnodedir/deploy/jms/hajndi-jms-ds.xml", "$nodedir/deploy/hajndi-jms-ds.xml");
|
| #apply remoting patch
| copy ("jboss-remoting.jar", "$nodedir/lib") or die ("can't copy remoting jar $!");
|
| &extractJarFile("$jbm14_dir/jboss-messaging.sar", "$nodedir/deploy/jboss-messaging.sar");
|
| &handleConfig_MessagingService("$nodedir/deploy/jboss-messaging.sar/messaging-service.xml");
|
| &handleConfig_JmsDs("$nodedir/deploy/jms-ds.xml");
|
| &handleConfig_StandardJBoss("$nodedir/conf/standardjboss.xml");
|
| &handleConfig_JBossService("$nodedir/conf/jboss-service.xml");
|
| &handleConfig_LoginConfig("$nodedir/conf/login-config.xml");
|
| }
|
| #$_[0] -- login-config.xml
| sub handleConfig_LoginConfig
| {
| my $lcfile = $_[0];
| open(my $h_lcfile, "<", $lcfile);
|
| local $/=undef;
| my $contents = <$h_lcfile>;
|
| $contents =~ s/(<\!--\sSecurity\sdomain\sfor\sJBossMQ.*)(<\!--\sSecurity\sdomains\sfor\stesting\snew\sjca\sframework\s-->)/$2/sg;
|
| $msgseccfg = '
| <application-policy name = "messaging">
| <authentication>
| <login-module code = "org.jboss.security.auth.spi.UsersRolesLoginModule"
| flag = "required" >
| <module-option name = "unauthenticatedIdentity">guest</module-option>
| <module-option name = "usersProperties">props/messaging-users.properties</module-option>
| <module-option name = "rolesProperties">props/messaging-roles.properties</module-option>
| </login-module>
| </authentication>
| </application-policy>
| ';
|
| $contents =~ s/(<policy>)/<policy>\n$msgseccfg/s;
|
| close $h_lcfile;
| open($h_lcfile, ">", $lcfile);
| print $h_lcfile $contents;
| close $h_lcfile;
| }
|
| #$_[0] -- jboss-service.xml
| sub handleConfig_JBossService
| {
| my $jsfile = $_[0];
| open(my $h_jsfile, "<", $jsfile);
|
| local $/=undef;
| my $contents = <$h_jsfile>;
|
| $contents =~ s/(<attribute\sname="JMSService">.*service=DestinationManager<\/attribute>\n)//sg;
|
| close $h_jsfile;
| open($h_jsfile, ">", $jsfile);
| print $h_jsfile $contents;
| close $h_jsfile;
| }
|
| #$_[0] -- standardjboss.xml
| sub handleConfig_StandardJBoss
| {
| my $sjfile = $_[0];
| open(my $h_sjfile, "<", $sjfile);
|
| local $/=undef;
| my $contents = <$h_sjfile>;
|
| $contents =~ s/(<CreateJBossMQDestination>true)/<CreateJBossMQDestination>false/sg;
|
| close $h_sjfile;
| open($h_sjfile, ">", $sjfile);
| print $h_sjfile $contents;
| close $h_sjfile;
| }
|
| #$_[0] -- jms-ds.xml
| sub handleConfig_JmsDs
| {
| my $jdfile = $_[0];
| open(my $h_jdfile, "<", $jdfile);
|
| local $/=undef;
| my $contents = <$h_jdfile>;
| $contents =~ s/(jboss.mq)/jboss.messaging/sg;
|
| close $h_jdfile;
| open($h_jdfile, ">", $jdfile);
| print $h_jdfile $contents;
| close $h_jdfile;
| }
|
| #$_[0] -- messaging-service.xml
| sub handleConfig_MessagingService
| {
| my $msfile = $_[0];
|
| open(my $h_msfile, "<", $msfile);
|
| local $/=undef; #make the whole contents into string.
| my $contents = <$h_msfile>;
| my $suckpasswd = '<attribute name="SuckerPassword">suckerforclusterjbm</attribute>';
| $contents =~ s/(<\!--\s*The password.*attribute>\s*-->)/$suckpasswd/s;
|
| close $h_msfile;
| open($h_msfile, ">", $msfile);
|
| print $h_msfile $contents;
| close $h_msfile;
| }
|
| #$_[0] -- jar file (zip file)
| #$_[1] -- target dir
| sub extractJarFile
| {
| $jarfile = $_[0];
| $targetDir = $_[1];
|
| if ( -e $targetDir )
| {
| if ( -f $targetDir )
| {
| #can't be a file
| &error("The target for extracting $jarfile can't be a existing file.\n");
| }
| }
| else
| {
| mkdir ($targetDir);
| }
| my $ae = Archive::Extract->new(archive => $jarfile, type => 'zip');
| $ae->extract( to => $targetDir ) or die $ae->error;
| }
|
|
| #$_[0] -- source, if dir, copy all its contents
| #$_[1] -- target, if dir, copy source to the dir.
| sub copyFile()
| {
| my $src = $_[0];
| my $target = $_[1];
|
| if ( not -e $src )
| {
| &error("$src not exist!\n");
| }
|
| #if src is dir, target must be.
| if ( -d $src )
| {
| if ( not -e $target )
| {
| mkdir ($target);
| }
| else
| {
| if ( not -d $target )
| {
| &error("$target must be a dir for dir copying.\n");
| }
| }
| ©Dir($src, $target);
| }
| else
| {
| #file copy
| if ( -e $target )
| {
| #if target is a file and exists
| if ( -f $target )
| {
| &error("$target exists, copy stopped. \n");
| }
| }
| copy($src, $target) or die "copy error $!\n";
| }
| }
|
|
|
| #copy the dir and its contents to a new dir recursively
| #$_[0] -- src dir
| #$_[1] -- dest dir
| sub copyDir()
| {
| my $srcdir = $_[0];
| my $targetdir = $_[1];
| my $exc_ref_dir = $_[2];
| my $exc_ref_file = $_[3];
|
| if ( not -e $targetdir )
| {
| mkdir ($targetdir);
| }
|
| local(*SRCDIR);
|
| opendir(SRCDIR, $srcdir);
|
| my @srcfiles = readdir(SRCDIR);
| for (<@srcfiles>)
| {
| my $sfile = "$srcdir/$_";
|
| if ( -d "$sfile" )
| {
| if ( ($_ ne ".") and ($_ ne "..") )
| {
| #if ( ${$exc_ref_dir}{$_} )
| if ( $exc_ref_dir->{$_} eq $_ )
| {
| print "ignoring $_\n";
| }
| else
| {
| ©Dir("$sfile", "$targetdir/$_");
| }
| }
| }
| else
| {
| if ( $exc_ref_file->{$_} eq $_ )
| {
| print "ignoring $_\n";
| }
| else
| {
| copy("$srcdir/$_", "$targetdir/$_");
| }
| }
| }
|
| close (SRCDIR);
| }
|
| sub usage
| {
| print "$0 --jbm14inst=<jbm14 installation dir> --jboss-home=<jboss.home> --node-base=<node name> --n-node=<num of nodes> --clustered --db=<mysql>\n";
| }
|
|
====jbm-sample-bindings.xml ====
| <!--
| $Id: sample-bindings.xml 75719 2008-07-11 20:16:03Z clebert.suconic(a)jboss.com $
|
| A sample configuration for the binding service which defines different
| port configurations (ports-default, ports-01, ports-02) for running multiple
| JBoss instances in parallel on the same machine.
|
| The actual port configuration can be selected within the jboss-service.xml
| file via ServiceBindingManager attribute ServerName.
|
| The following sample e.g. selects the jboss-default port configuration
|
| <mbean code="org.jboss.services.binding.ServiceBindingManager"
| name="jboss.system:service=ServiceBindingManager">
| <attribute name="ServerName">ports-default</attribute>
| <attribute name="StoreURL">file:../server/port-bindings.xml</attribute>
| <attribute name="StoreFactoryClassName">
| org.jboss.services.binding.XMLServicesStoreFactory
| </attribute>
| </mbean>
|
| For running a second server instance you have to change the port
| bindings of that instance by specifing an alternative port binding
| configuration in the jboss-service.xml of the second server, e.g.
|
| <attribute name="ServerName">ports-01</attribute>
|
| Additional documentation for running multiple JBoss instances on the
| same machine can be found at http://www.jboss.com/products/jbossas/docs
| in the offical JBoss Application Server Guide in chapter
| "MBean Service Miscellany - Services Binding Management"
| -->
| <service-bindings>
|
| <!-- ********************************************************** -->
| <!-- * ports-default * -->
| <!-- ********************************************************** -->
| <server name="ports-default">
|
| <!-- ********************* jboss-service.xml ****************** -->
|
| <service-config name="jboss:service=Naming"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="Port" hostName="BindAddress">
| <attribute name="RmiPort">1098</attribute>
| </delegate-config>
| <binding port="1099" host="${jboss.bind.address}"/>
| </service-config>
|
|
| <service-config name="jboss:service=WebService"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="Port"/>
| <binding port="8083"/>
| </service-config>
|
|
| <service-config name="jboss:service=invoker,type=jrmp"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="RMIObjectPort"/>
| <binding port="4444"/>
| </service-config>
|
| <service-config name="jboss:service=invoker,type=pooled"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="ServerBindPort"/>
| <binding port="4445"/>
| </service-config>
|
|
| <!-- ********************* cluster-service.xml **************** -->
|
| <service-config name="jboss:service=HAJNDI"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate">
| <delegate-config portName="Port" hostName="BindAddress">
| <attribute name="RmiPort">1101</attribute>
| </delegate-config>
| <binding port="1100" host="${jboss.bind.address}"/>
| </service-config>
|
| <service-config name="jboss:service=invoker,type=jrmpha"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate">
| <delegate-config portName="RMIObjectPort"/>
| <binding port="4444"/>
| </service-config>
|
| <service-config name="jboss:service=invoker,type=pooledha"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate">
| <delegate-config portName="ServerBindPort"/>
| <binding port="4448"/>
| </service-config>
|
| <!-- ********************* iiop-service.xml ****************** -->
|
| <service-config name="jboss:service=CorbaORB"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="Port"/>
| <binding port="3528"/>
| </service-config>
|
|
| <!-- ********************* jmx-rmi-adaptor.sar **************** -->
|
| <service-config name="jboss.jmx:type=Connector,name=RMI"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="RMIObjectPort"/>
| <binding port="19001"/>
| </service-config>
|
|
| <!-- ********************* snmp-adaptor.sar ****************** -->
|
| <service-config name="jboss.jmx:name=SnmpAgent,service=trapd,type=logger"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="Port"/>
| <binding port="1162"/>
| </service-config>
|
| <service-config name="jboss.jmx:name=SnmpAgent,service=snmp,type=adaptor"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="Port"/>
| <binding port="1161"/>
| </service-config>
|
|
| <!-- ********************* jbossmq-service.xml **************** -->
|
| <!-- JMS related services -->
| <service-config name="jboss.mq:service=InvocationLayer,type=UIL2"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="ServerBindPort"/>
| <binding port="8093"/>
| </service-config>
|
|
| <!-- ********************* jbossmq-httpil.sar **************** -->
| <service-config name="jboss.mq:service=InvocationLayer,type=HTTP"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="URLPort"/>
| <binding port="8080"/>
| </service-config>
|
| <!-- ********************* hajndi-jms-ds.xml **************** -->
|
| <!-- The JMS provider loader -->
| <service-config name="jboss.mq:service=JMSProviderLoader,name=HAJNDIJMSProvider"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate">
| <!--
| MAKE SURE java.naming.provider.url
| PORT IS SAME AS HA-JNDI ABOVE !!!
| -->
| <delegate-config>
| <attribute name="Properties"><![CDATA[
| java.naming.factory.initial=org.jnp.interfaces.NamingContextFactory
| java.naming.factory.url.pkgs=org.jboss.naming:org.jnp.interfaces
| java.naming.provider.url=${jboss.bind.address:localhost}:1100
| jnp.disableDiscovery=false
| jnp.partitionName=${jboss.partition.name:DefaultPartition}
| jnp.discoveryGroup=${jboss.partition.udpGroup:230.0.0.4}
| jnp.discoveryPort=1102
| jnp.discoveryTTL=16
| jnp.discoveryTimeout=5000
| jnp.maxRetries=1
| ]]>
| </attribute>
| </delegate-config>
| <!-- NOTE: YOU MUST ADD THIS ELEMENT, BUT THE VALUE DOESN'T MATTER
| BE SURE THE CORRECT VALUE IS IN java.naming.provider.url ABOVE -->
| <binding port="1100"/>
| </service-config>
|
| <!-- **************** http-invoker.sar & httpha-invoker.sar*************** -->
| <!-- EJBInvoker -->
| <service-config name="jboss:service=invoker,type=http"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config>
| <attribute name="InvokerURLSuffix">:${port}/invoker/EJBInvokerServlet</attribute>
| </delegate-config>
| <!--
| MUST BE THE SAME AS
| TOMCAT HTTP CONNECTOR BELOW !!!
| -->
| <binding port="8080"/>
| </service-config>
|
| <!-- EJB3 Remoting Connector ejb3.deployer/META-INF/jboss-service.xml -->
|
| <service-config name="jboss.remoting:type=Connector,name=DefaultEjb3Connector,handler=ejb3"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate">
| <delegate-config>
| <attribute name="InvokerLocator">socket://${jboss.bind.address}:3873</attribute>
| </delegate-config>
| <binding port="3873"/>
| </service-config>
|
| <!-- JMXInvoker -->
| <service-config name="jboss:service=invoker,type=http,target=Naming"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config>
| <attribute name="InvokerURLSuffix">:${port}/invoker/JMXInvokerServlet</attribute>
| </delegate-config>
| <!--
| MUST BE THE SAME AS
| TOMCAT HTTP CONNECTOR BELOW !!!
| -->
| <binding port="8080"/>
| </service-config>
|
| <!-- readonly JMXInvoker -->
| <service-config name="jboss:service=invoker,type=http,target=Naming,readonly=true"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config>
| <attribute name="InvokerURLSuffix">:${port}/invoker/readonly/JMXInvokerServlet</attribute>
| </delegate-config>
| <!--
| MUST BE THE SAME AS
| TOMCAT HTTP CONNECTOR BELOW !!!
| -->
| <binding port="8080"/>
| </service-config>
|
| <!-- **************** httpha-invoker.sar*************** -->
| <!-- EJBInvokerHA -->
| <service-config name="jboss:service=invoker,type=httpHA"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config>
| <attribute name="InvokerURLSuffix">:${port}/invoker/EJBInvokerHAServlet</attribute>
| </delegate-config>
| <binding port="8080"/>
| </service-config>
|
| <!-- JMXInvokerHA -->
| <service-config name="jboss:service=invoker,type=http,target=HAJNDI"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config>
| <attribute name="InvokerURLSuffix">:${port}/invoker/JMXInvokerHAServlet</attribute>
| </delegate-config>
| <binding port="8080"/>
| </service-config>
|
|
| <!-- ********************* jboss-ws4ee.sar **************** -->
|
| <!-- Web Service related services -->
| <service-config name="jboss.ws4ee:service=AxisService"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="WebServicePort" hostName="WebServiceHost"/>
| <binding port="8080" host="${jboss.bind.address}"/>
| </service-config>
|
| <!-- ********************* remoting **************** -->
|
| <!-- *** remoting connector *** -->
| <service-config name="jboss.remoting:service=Connector,transport=socket"
| delegateClass="org.jboss.services.binding.XSLTConfigDelegate">
| <delegate-config>
| <xslt-config configName="Configuration"><![CDATA[
| <xsl:stylesheet xmlns:xsl='http://www.w3.org/1999/XSL/Transform' version='1.0'>
|
| <xsl:output method="xml" />
| <xsl:param name="port"/>
|
| <xsl:template match="/">
| <xsl:apply-templates/>
| </xsl:template>
|
| <xsl:template match="attribute[@name='serverBindPort']">
| <attribute type="java.lang.String" name="serverBindPort"><xsl:value-of select='$port'/></attribute>
| </xsl:template>
|
| <xsl:template match="*|@*">
| <xsl:copy>
| <xsl:apply-templates select="@*|node()"/>
| </xsl:copy>
| </xsl:template>
| </xsl:stylesheet>
| ]]>
| </xslt-config>
| </delegate-config>
| <binding port="4446" />
| </service-config>
|
|
| <!-- ********************* hsqldb-ds.xml ********************** -->
|
| <!-- Hypersonic related services when using the tcp/ip access
| <service-config name="jboss.jca:service=ManagedConnectionFactory,name=DefaultDS"
| delegateClass="org.jboss.services.binding.XSLTConfigDelegate"
| >
| <delegate-config>
| <xslt-config configName="ManagedConnectionFactoryProperties"><![CDATA[
| <xsl:stylesheet
| xmlns:xsl='http://www.w3.org/1999/XSL/Transform' version='1.0'>
|
| <xsl:output method="xml" />
| <xsl:param name="host"/>
| <xsl:param name="port"/>
|
| <xsl:template match="/">
| <xsl:apply-templates/>
| </xsl:template>
|
| <xsl:template match="config-property[@name='ConnectionURL']">
| <config-property type="java.lang.String" name="ConnectionURL">jdbc:hsqldb:hsql://<xsl:value-of select='$host'/>:<xsl:value-of select='$port'/></config-property>
| </xsl:template>
|
| <xsl:template match="*|@*">
| <xsl:copy>
| <xsl:apply-templates select="@*|node()"/>
| </xsl:copy>
| </xsl:template>
| </xsl:stylesheet>
| ]]>
| </xslt-config>
| </delegate-config>
| <binding host="localhost" port="1701" />
| </service-config>
|
| <service-config name="jboss:service=Hypersonic"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="Port" />
| <binding port="1701" />
| </service-config>
| -->
|
|
| <!-- ********************* tomcat ********************** -->
|
| <service-config name="jboss.web:service=WebServer"
| delegateClass="org.jboss.services.binding.XSLTFileDelegate"
| >
| <delegate-config>
| <xslt-config configName="ConfigFile"><![CDATA[
| <xsl:stylesheet
| xmlns:xsl='http://www.w3.org/1999/XSL/Transform' version='1.0'>
|
| <xsl:output method="xml" />
| <xsl:param name="port"/>
|
| <xsl:variable name="portAJP" select="$port - 71"/>
| <xsl:variable name="portHttps" select="$port + 363"/>
|
| <xsl:template match="/">
| <xsl:apply-templates/>
| </xsl:template>
|
| <xsl:template match = "Connector">
| <Connector>
| <xsl:for-each select="@*">
| <xsl:choose>
| <xsl:when test="(name() = 'port' and . = '8080')">
| <xsl:attribute name="port"><xsl:value-of select="$port" /></xsl:attribute>
| </xsl:when>
| <xsl:when test="(name() = 'port' and . = '8009')">
| <xsl:attribute name="port"><xsl:value-of select="$portAJP" /></xsl:attribute>
| </xsl:when>
| <xsl:when test="(name() = 'redirectPort')">
| <xsl:attribute name="redirectPort"><xsl:value-of select="$portHttps" /></xsl:attribute>
| </xsl:when>
| <xsl:when test="(name() = 'port' and . = '8443')">
| <xsl:attribute name="port"><xsl:value-of select="$portHttps" /></xsl:attribute>
| </xsl:when>
| <xsl:otherwise>
| <xsl:attribute name="{name()}"><xsl:value-of select="." /></xsl:attribute>
| </xsl:otherwise>
| </xsl:choose>
| </xsl:for-each>
| <xsl:apply-templates/>
| </Connector>
| </xsl:template>
|
| <xsl:template match="*|@*">
| <xsl:copy>
| <xsl:apply-templates select="@*|node()"/>
| </xsl:copy>
| </xsl:template>
| </xsl:stylesheet>
| ]]>
| </xslt-config>
| </delegate-config>
| <binding port="8080"/>
| </service-config>
|
| <!-- ********************* jboss messaging ********************** -->
|
| <service-config name="jboss.messaging:service=Connector,transport=bisocket"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate">
| <delegate-config>
| <attribute name="Configuration"><![CDATA[
| <config>
| <invoker transport="bisocket">
| <attribute name="marshaller" isParam="true">org.jboss.jms.wireformat.JMSWireFormat</attribute>
| <attribute name="unmarshaller" isParam="true">org.jboss.jms.wireformat.JMSWireFormat</attribute>
| <attribute name="dataType" isParam="true">jms</attribute>
| <attribute name="socket.check_connection" isParam="true">false</attribute>
| <attribute name="serverBindAddress">${jboss.bind.address}</attribute>
| <attribute name="serverBindPort">4457</attribute>
| <attribute name="clientSocketClass" isParam="true">org.jboss.jms.client.remoting.ClientSocketWrapper</attribute>
| <attribute name="serverSocketClass">org.jboss.jms.server.remoting.ServerSocketWrapper</attribute>
| <attribute name="numberOfCallRetries" isParam="true">1</attribute>
| <attribute name="pingFrequency" isParam="true">214748364</attribute>
| <attribute name="pingWindowFactor" isParam="true">10</attribute>
| <attribute name="onewayThreadPool">org.jboss.jms.server.remoting.DirectThreadPool</attribute>
| <attribute name="stopLeaseOnFailure" isParam="true">true</attribute>
| <attribute name="clientLeasePeriod" isParam="true">10000</attribute>
| <attribute name="timeout" isParam="true">0</attribute>
| <attribute name="numberOfRetries" isParam="true">10</attribute>
| <attribute name="JBM_clientMaxPoolSize" isParam="true">200</attribute>
| <attribute name="callbackTimeout">10000</attribute>
| </invoker>
| <handlers>
| <handler subsystem="JMS">org.jboss.jms.server.remoting.JMSServerInvocationHandler</handler>
| </handlers>
| </config>
| ]]></attribute>
| </delegate-config>
| <binding port="4457"/>
| </service-config>
|
|
| </server>
|
| <!-- ********************************************************** -->
| <!-- * ports-01 * -->
| <!-- ********************************************************** -->
| <server name="ports-01">
|
| <!-- EJB3 Remoting Connector ejb3.deployer/META-INF/jboss-service.xml -->
|
| <service-config name="jboss.remoting:type=Connector,name=DefaultEjb3Connector,handler=ejb3"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate">
| <delegate-config>
| <attribute name="InvokerLocator">socket://${jboss.bind.address}:3973</attribute>
| </delegate-config>
| <binding port="3973"/>
| </service-config>
|
| <!-- ********************* jboss-service.xml ****************** -->
|
| <service-config name="jboss:service=Naming"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="Port" hostName="BindAddress">
| <attribute name="RmiPort">1198</attribute>
| </delegate-config>
| <binding port="1199" host="${jboss.bind.address}"/>
| </service-config>
|
|
| <service-config name="jboss:service=WebService"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="Port"/>
| <binding port="8183"/>
| </service-config>
|
|
| <service-config name="jboss:service=invoker,type=jrmp"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="RMIObjectPort"/>
| <binding port="4544"/>
| </service-config>
|
|
| <service-config name="jboss:service=invoker,type=pooled"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="ServerBindPort"/>
| <binding port="4545"/>
| </service-config>
|
|
| <!-- ********************* cluster-service.xml **************** -->
|
| <service-config name="jboss:service=HAJNDI"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate">
| <delegate-config portName="Port" hostName="BindAddress">
| <attribute name="RmiPort">1201</attribute>
| </delegate-config>
| <binding port="1200" host="${jboss.bind.address}"/>
| </service-config>
|
| <service-config name="jboss:service=invoker,type=jrmpha"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate">
| <delegate-config portName="RMIObjectPort"/>
| <binding port="4544"/>
| </service-config>
|
| <service-config name="jboss:service=invoker,type=pooledha"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate">
| <delegate-config portName="ServerBindPort"/>
| <binding port="4548"/>
| </service-config>
|
| <!-- ********************* iiop-service.xml ****************** -->
|
| <service-config name="jboss:service=CorbaORB"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="Port"/>
| <binding port="3628"/>
| </service-config>
|
|
| <!-- ********************* jmx-rmi-adaptor.sar **************** -->
|
| <service-config name="jboss.jmx:type=Connector,name=RMI"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="RMIObjectPort"/>
| <binding port="19101"/>
| </service-config>
|
|
| <!-- ********************* snmp-adaptor.sar ****************** -->
|
| <service-config name="jboss.jmx:name=SnmpAgent,service=trapd,type=logger"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="Port"/>
| <binding port="1262"/>
| </service-config>
|
| <service-config name="jboss.jmx:name=SnmpAgent,service=snmp,type=adaptor"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="Port"/>
| <binding port="1261"/>
| </service-config>
|
|
| <!-- ********************* jbossmq-service.xml **************** -->
|
| <!-- JMS related services -->
| <service-config name="jboss.mq:service=InvocationLayer,type=UIL2"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="ServerBindPort"/>
| <binding port="8193"/>
| </service-config>
|
|
| <!-- ********************* jbossmq-httpil.sar **************** -->
| <service-config name="jboss.mq:service=InvocationLayer,type=HTTP"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="URLPort"/>
| <binding port="8180"/>
| </service-config>
|
| <!-- ********************* hajndi-jms-ds.xml **************** -->
|
| <!-- The JMS provider loader -->
| <service-config name="jboss.mq:service=JMSProviderLoader,name=HAJNDIJMSProvider"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate">
| <!--
| MAKE SURE java.naming.provider.url
| PORT IS SAME AS HA-JNDI ABOVE !!!
| -->
| <delegate-config>
| <attribute name="Properties"><![CDATA[
| java.naming.factory.initial=org.jnp.interfaces.NamingContextFactory
| java.naming.factory.url.pkgs=org.jboss.naming:org.jnp.interfaces
| java.naming.provider.url=${jboss.bind.address:localhost}:1200
| jnp.disableDiscovery=false
| jnp.partitionName=${jboss.partition.name:DefaultPartition}
| jnp.discoveryGroup=${jboss.partition.udpGroup:230.0.0.4}
| jnp.discoveryPort=1102
| jnp.discoveryTTL=16
| jnp.discoveryTimeout=5000
| jnp.maxRetries=1
| ]]>
| </attribute>
| </delegate-config>
| <!-- NOTE: YOU MUST ADD THIS ELEMENT, BUT THE VALUE DOESN'T MATTER
| BE SURE THE CORRECT VALUE IS IN java.naming.provider.url ABOVE -->
| <binding port="1200"/>
| </service-config>
|
| <!-- **************** http-invoker.sar & httpha-invoker.sar*************** -->
| <!-- EJBInvoker -->
| <service-config name="jboss:service=invoker,type=http"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config>
| <attribute name="InvokerURLSuffix">:${port}/invoker/EJBInvokerServlet</attribute>
| </delegate-config>
| <!--
| MUST BE THE SAME AS
| TOMCAT HTTP CONNECTOR BELOW !!!
| -->
| <binding port="8180"/>
| </service-config>
|
| <!-- JMXInvoker -->
| <service-config name="jboss:service=invoker,type=http,target=Naming"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config>
| <attribute name="InvokerURLSuffix">:${port}/invoker/JMXInvokerServlet</attribute>
| </delegate-config>
| <!--
| MUST BE THE SAME AS
| TOMCAT HTTP CONNECTOR BELOW !!!
| -->
| <binding port="8180"/>
| </service-config>
|
| <!-- readonly JMXInvoker -->
| <service-config name="jboss:service=invoker,type=http,target=Naming,readonly=true"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config>
| <attribute name="InvokerURLSuffix">:${port}/invoker/readonly/JMXInvokerServlet</attribute>
| </delegate-config>
| <!--
| MUST BE THE SAME AS
| TOMCAT HTTP CONNECTOR BELOW !!!
| -->
| <binding port="8180"/>
| </service-config>
|
| <!-- **************** httpha-invoker.sar*************** -->
| <!-- EJBInvokerHA -->
| <service-config name="jboss:service=invoker,type=httpHA"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config>
| <attribute name="InvokerURLSuffix">:${port}/invoker/EJBInvokerHAServlet</attribute>
| </delegate-config>
| <binding port="8180"/>
| </service-config>
|
| <!-- JMXInvokerHA -->
| <service-config name="jboss:service=invoker,type=http,target=HAJNDI"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config>
| <attribute name="InvokerURLSuffix">:${port}/invoker/JMXInvokerHAServlet</attribute>
| </delegate-config>
| <binding port="8180"/>
| </service-config>
|
|
|
|
| <!-- ********************* jboss-ws4ee.sar **************** -->
|
| <!-- Web Service related services -->
| <service-config name="jboss.ws4ee:service=AxisService"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="WebServicePort" hostName="WebServiceHost"/>
| <binding port="8180" host="${jboss.bind.address}"/>
| </service-config>
|
| <!-- ********************* remoting **************** -->
|
| <!-- *** remoting connector *** -->
| <service-config name="jboss.remoting:service=Connector,transport=socket"
| delegateClass="org.jboss.services.binding.XSLTConfigDelegate">
| <delegate-config>
| <xslt-config configName="Configuration"><![CDATA[
| <xsl:stylesheet xmlns:xsl='http://www.w3.org/1999/XSL/Transform' version='1.0'>
|
| <xsl:output method="xml" />
| <xsl:param name="port"/>
|
| <xsl:template match="/">
| <xsl:apply-templates/>
| </xsl:template>
|
| <xsl:template match="attribute[@name='serverBindPort']">
| <attribute type="java.lang.String" name="serverBindPort"><xsl:value-of select='$port'/></attribute>
| </xsl:template>
|
| <xsl:template match="*|@*">
| <xsl:copy>
| <xsl:apply-templates select="@*|node()"/>
| </xsl:copy>
| </xsl:template>
| </xsl:stylesheet>
| ]]>
| </xslt-config>
| </delegate-config>
| <binding port="5446" />
| </service-config>
|
| <!-- ********************* hsqldb-ds.xml ********************** -->
|
| <!-- Hypersonic related services
|
| Only if using TCP setup (local file setup by default)
|
| <service-config name="jboss.jca:service=ManagedConnectionFactory,name=DefaultDS"
| delegateClass="org.jboss.services.binding.XSLTConfigDelegate"
| >
| <delegate-config>
| <xslt-config configName="ManagedConnectionFactoryProperties"><![CDATA[
| <xsl:stylesheet
| xmlns:xsl='http://www.w3.org/1999/XSL/Transform' version='1.0'>
|
| <xsl:output method="xml" />
| <xsl:param name="host"/>
| <xsl:param name="port"/>
|
| <xsl:template match="/">
| <xsl:apply-templates/>
| </xsl:template>
|
| <xsl:template match="config-property[@name='ConnectionURL']">
| <config-property type="java.lang.String" name="ConnectionURL">jdbc:hsqldb:hsql://<xsl:value-of select='$host'/>:<xsl:value-of select='$port'/></config-property>
| </xsl:template>
|
| <xsl:template match="*|@*">
| <xsl:copy>
| <xsl:apply-templates select="@*|node()"/>
| </xsl:copy>
| </xsl:template>
| </xsl:stylesheet>
| ]]>
| </xslt-config>
| </delegate-config>
| <binding host="localhost" port="1801" />
| </service-config>
|
| <service-config name="jboss:service=Hypersonic"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="Port" />
| <binding port="1801" />
| </service-config>
|
| -->
|
|
| <!-- ********************* tomcat ********************** -->
|
| <service-config name="jboss.web:service=WebServer"
| delegateClass="org.jboss.services.binding.XSLTFileDelegate"
| >
| <delegate-config>
| <xslt-config configName="ConfigFile"><![CDATA[
| <xsl:stylesheet
| xmlns:xsl='http://www.w3.org/1999/XSL/Transform' version='1.0'>
|
| <xsl:output method="xml" />
| <xsl:param name="port"/>
|
| <xsl:variable name="portAJP" select="$port - 71"/>
| <xsl:variable name="portHttps" select="$port + 363"/>
|
| <xsl:template match="/">
| <xsl:apply-templates/>
| </xsl:template>
|
| <xsl:template match = "Connector">
| <Connector>
| <xsl:for-each select="@*">
| <xsl:choose>
| <xsl:when test="(name() = 'port' and . = '8080')">
| <xsl:attribute name="port"><xsl:value-of select="$port" /></xsl:attribute>
| </xsl:when>
| <xsl:when test="(name() = 'port' and . = '8009')">
| <xsl:attribute name="port"><xsl:value-of select="$portAJP" /></xsl:attribute>
| </xsl:when>
| <xsl:when test="(name() = 'redirectPort')">
| <xsl:attribute name="redirectPort"><xsl:value-of select="$portHttps" /></xsl:attribute>
| </xsl:when>
| <xsl:when test="(name() = 'port' and . = '8443')">
| <xsl:attribute name="port"><xsl:value-of select="$portHttps" /></xsl:attribute>
| </xsl:when>
| <xsl:otherwise>
| <xsl:attribute name="{name()}"><xsl:value-of select="." /></xsl:attribute>
| </xsl:otherwise>
| </xsl:choose>
| </xsl:for-each>
| <xsl:apply-templates/>
| </Connector>
| </xsl:template>
|
| <xsl:template match="*|@*">
| <xsl:copy>
| <xsl:apply-templates select="@*|node()"/>
| </xsl:copy>
| </xsl:template>
| </xsl:stylesheet>
| ]]>
| </xslt-config>
| </delegate-config>
| <binding port="8180"/>
| </service-config>
|
| <!-- ********************* jboss messaging ********************** -->
|
| <service-config name="jboss.messaging:service=Connector,transport=bisocket"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate">
| <delegate-config>
| <attribute name="Configuration"><![CDATA[
| <config>
| <invoker transport="bisocket">
|
| <!-- There should be no reason to change these parameters - warning!
| Changing them may stop JBoss Messaging working correctly -->
| <attribute name="marshaller" isParam="true">org.jboss.jms.wireformat.JMSWireFormat</attribute>
| <attribute name="unmarshaller" isParam="true">org.jboss.jms.wireformat.JMSWireFormat</attribute>
| <attribute name="dataType" isParam="true">jms</attribute>
| <attribute name="socket.check_connection" isParam="true">false</attribute>
| <attribute name="timeout" isParam="true">0</attribute>
| <attribute name="serverBindAddress">${jboss.bind.address}</attribute>
| <attribute name="serverBindPort">4557</attribute>
| <attribute name="clientSocketClass" isParam="true">org.jboss.jms.client.remoting.ClientSocketWrapper</attribute>
| <attribute name="serverSocketClass">org.jboss.jms.server.remoting.ServerSocketWrapper</attribute>
| <attribute name="numberOfCallRetries" isParam="true">1</attribute>
| <attribute name="pingFrequency" isParam="true">214748364</attribute>
| <attribute name="pingWindowFactor" isParam="true">10</attribute>
| <attribute name="onewayThreadPool">org.jboss.jms.server.remoting.DirectThreadPool</attribute>
| <!-- End immutable parameters -->
|
| <!-- Periodicity of client pings. Server window by default is twice this figure -->
| <attribute name="clientLeasePeriod" isParam="true">10000</attribute>
|
| <!-- Number of seconds to wait for a connection in the client pool to become free -->
| <attribute name="numberOfRetries" isParam="true">10</attribute>
|
| <!-- Max Number of connections in client pool. This should be significantly higher than
| the max number of sessions/consumers you expect -->
| <attribute name="JBM_clientMaxPoolSize" isParam="true">200</attribute>
|
| <!-- Use these parameters to specify values for binding and connecting control connections to
| work with your firewall/NAT configuration
| <attribute name="secondaryBindPort">xyz</attribute>
| <attribute name="secondaryConnectPort">abc</attribute>
| -->
|
| </invoker>
| <handlers>
| <handler subsystem="JMS">org.jboss.jms.server.remoting.JMSServerInvocationHandler</handler>
| </handlers>
| </config>
| ]]></attribute>
| </delegate-config>
| <binding port="4557"/>
| </service-config>
|
|
| </server>
|
| <!-- ********************************************************** -->
| <!-- * ports-02 * -->
| <!-- ********************************************************** -->
| <server name="ports-02">
|
| <!-- EJB3 Remoting Connector ejb3.deployer/META-INF/jboss-service.xml -->
|
| <service-config name="jboss.remoting:type=Connector,name=DefaultEjb3Connector,handler=ejb3"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate">
| <delegate-config>
| <attribute name="InvokerLocator">socket://${jboss.bind.address}:4073</attribute>
| </delegate-config>
| <binding port="4073"/>
| </service-config>
|
| <!-- ********************* jboss-service.xml ****************** -->
|
| <service-config name="jboss:service=Naming"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="Port" hostName="BindAddress">
| <attribute name="RmiPort">1298</attribute>
| </delegate-config>
| <binding port="1299" host="${jboss.bind.address}"/>
| </service-config>
|
|
| <service-config name="jboss:service=WebService"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="Port"/>
| <binding port="8283"/>
| </service-config>
|
|
| <service-config name="jboss:service=invoker,type=jrmp"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="RMIObjectPort"/>
| <binding port="4644"/>
| </service-config>
|
|
| <service-config name="jboss:service=invoker,type=pooled"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="ServerBindPort"/>
| <binding port="4645"/>
| </service-config>
|
|
| <!-- ********************* cluster-service.xml **************** -->
|
| <service-config name="jboss:service=HAJNDI"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate">
| <delegate-config portName="Port" hostName="BindAddress">
| <attribute name="RmiPort">1301</attribute>
| </delegate-config>
| <binding port="1300" host="${jboss.bind.address}"/>
| </service-config>
|
| <service-config name="jboss:service=invoker,type=jrmpha"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate">
| <delegate-config portName="RMIObjectPort"/>
| <binding port="4644"/>
| </service-config>
|
| <service-config name="jboss:service=invoker,type=pooledha"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate">
| <delegate-config portName="ServerBindPort"/>
| <binding port="4648"/>
| </service-config>
|
| <!-- ********************* iiop-service.xml ****************** -->
|
| <service-config name="jboss:service=CorbaORB"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="Port"/>
| <binding port="3728"/>
| </service-config>
|
|
| <!-- ********************* jmx-rmi-adaptor.sar **************** -->
|
| <service-config name="jboss.jmx:type=Connector,name=RMI"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="RMIObjectPort"/>
| <binding port="19201"/>
| </service-config>
|
|
| <!-- ********************* snmp-adaptor.sar ****************** -->
|
| <service-config name="jboss.jmx:name=SnmpAgent,service=trapd,type=logger"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="Port"/>
| <binding port="1362"/>
| </service-config>
|
| <service-config name="jboss.jmx:name=SnmpAgent,service=snmp,type=adaptor"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="Port"/>
| <binding port="1361"/>
| </service-config>
|
|
| <!-- ********************* jbossmq-service.xml **************** -->
|
| <!-- JMS related services -->
| <service-config name="jboss.mq:service=InvocationLayer,type=UIL2"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="ServerBindPort"/>
| <binding port="8293"/>
| </service-config>
|
|
| <!-- ********************* jbossmq-httpil.sar **************** -->
| <service-config name="jboss.mq:service=InvocationLayer,type=HTTP"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="URLPort"/>
| <binding port="8280"/>
| </service-config>
|
| <!-- ********************* hajndi-jms-ds.xml **************** -->
|
| <!-- The JMS provider loader -->
| <service-config name="jboss.mq:service=JMSProviderLoader,name=HAJNDIJMSProvider"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate">
| <!--
| MAKE SURE java.naming.provider.url
| PORT IS SAME AS HA-JNDI ABOVE !!!
| -->
| <delegate-config>
| <attribute name="Properties"><![CDATA[
| java.naming.factory.initial=org.jnp.interfaces.NamingContextFactory
| java.naming.factory.url.pkgs=org.jboss.naming:org.jnp.interfaces
| java.naming.provider.url=${jboss.bind.address:localhost}:1300
| jnp.disableDiscovery=false
| jnp.partitionName=${jboss.partition.name:DefaultPartition}
| jnp.discoveryGroup=${jboss.partition.udpGroup:230.0.0.4}
| jnp.discoveryPort=1102
| jnp.discoveryTTL=16
| jnp.discoveryTimeout=5000
| jnp.maxRetries=1
| ]]>
| </attribute>
| </delegate-config>
| <!-- NOTE: YOU MUST ADD THIS ELEMENT, BUT THE VALUE DOESN'T MATTER
| BE SURE THE CORRECT VALUE IS IN java.naming.provider.url ABOVE -->
| <binding port="1300"/>
| </service-config>
|
| <!-- **************** http-invoker.sar & httpha-invoker.sar*************** -->
| <!-- EJBInvoker -->
| <service-config name="jboss:service=invoker,type=http"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config>
| <attribute name="InvokerURLSuffix">:${port}/invoker/EJBInvokerServlet</attribute>
| </delegate-config>
| <!--
| MUST BE THE SAME AS
| TOMCAT HTTP CONNECTOR BELOW !!!
| -->
| <binding port="8280"/>
| </service-config>
|
| <!-- JMXInvoker -->
| <service-config name="jboss:service=invoker,type=http,target=Naming"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config>
| <attribute name="InvokerURLSuffix">:${port}/invoker/JMXInvokerServlet</attribute>
| </delegate-config>
| <!--
| MUST BE THE SAME AS
| TOMCAT HTTP CONNECTOR BELOW !!!
| -->
| <binding port="8280"/>
| </service-config>
|
| <!-- readonly JMXInvoker -->
| <service-config name="jboss:service=invoker,type=http,target=Naming,readonly=true"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config>
| <attribute name="InvokerURLSuffix">:${port}/invoker/readonly/JMXInvokerServlet</attribute>
| </delegate-config>
| <!--
| MUST BE THE SAME AS
| TOMCAT HTTP CONNECTOR BELOW !!!
| -->
| <binding port="8280"/>
| </service-config>
|
| <!-- **************** httpha-invoker.sar*************** -->
| <!-- EJBInvokerHA -->
| <service-config name="jboss:service=invoker,type=httpHA"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config>
| <attribute name="InvokerURLSuffix">:${port}/invoker/EJBInvokerHAServlet</attribute>
| </delegate-config>
| <binding port="8280"/>
| </service-config>
|
| <!-- JMXInvokerHA -->
| <service-config name="jboss:service=invoker,type=http,target=HAJNDI"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config>
| <attribute name="InvokerURLSuffix">:${port}/invoker/JMXInvokerHAServlet</attribute>
| </delegate-config>
| <binding port="8280"/>
| </service-config>
|
|
|
|
| <!-- ********************* jboss-ws4ee.sar **************** -->
|
| <!-- Web Service related services -->
| <service-config name="jboss.ws4ee:service=AxisService"
| delegateClass="org.jboss.services.binding.AttributeMappingDelegate"
| >
| <delegate-config portName="WebServicePort" hostName="WebServiceHost"/>
| <binding port="8280" host="${jboss.bind.address}"/>
| </service-config>
|
| <!-- ********************* remoting **************** -->
|
| <!-- *** remoting connector *** -->
| <service-config name="jboss.remoting:service=Connector,transport=socket"
| delegateClass="org.jboss.services.binding.XSLTConfigDelegate">
| <delegate-config>
| <xslt-config configName="Configuration"><![CDATA[
| <xsl:stylesheet xmlns:xsl='http://www.w3.org/1999/XSL/Transform' version='1.0'>
|
| <xsl:output method="xml" />
| <xsl:param name="port"/>
|
| <xsl:template match="/">
| <xsl:apply-templates/>
| </xsl:template>
|
| <xsl:template match="attribute[@name='serverBindPort']">
| <attribute type="java.lang.String" name="serverBindPort"><xsl:value-of select='$port'/></attribute>
| </xsl:template>
|
| <xsl:template match="*|@*">
| <xsl:copy>
| <xsl:apply-templates select="@*|node()"/>
| </xsl:copy>
| </xsl:template>
| </xsl:stylesheet>
| ]]>
| </xslt-config>
| </delegate-config>
| <binding port="6446" />
| </service-config>
|
|
| <!-- ********************* hsqldb-ds.xml ********************** -->
|
| <!-- Hypersonic related services
|
| Only if using TCP setup (local file setup by default)
|
|
View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4199115#4199115
Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4199115
17 years
- 1
- 0