Paul Robinson [https://community.jboss.org/people/paul.robinson] modified the document: "Narayana Release Process" To view the document, visit: https://community.jboss.org/docs/DOC-17433 -------------------------------------------------------------- This page provides a list of instructions that must be done *in order* when doing a release of Narayana. h2. Check JIRA 1. Check all issues resolved. 2. Create next point release version if not exists - this is so you can push issues in step 3 below. 3. Unresolved issues should be resolved or pushed. h2. Check Hudson Ensure no test failures in the group of hudson tests, for the branch you intend to release. h2. Raise AS7 component upgrade request in Jira Prepare for a PR to update AS7. 1. https://issues.jboss.org/browse/AS7 https://issues.jboss.org/browse/AS7 2. create a new 'component update' issue.1. Ensure the module is set to 'transactions' 2. select an appropriate 'fix for'. 3. Assign it to yourself. h2. Do Release h3. Git Branches (4.17 and 5 only) Must be done first as the build-release-packages.xml relies on the tag being available cd $NARAYANA_SRC/scripts pre-release.sh <next version, e.g: 5.0.0.M3> h3. Create the AS7 pull request branch and roll the jbosstm/jboss-as branch to next SNAPSHOT (UN-TESTED COMMANDS!!) BRANCH=4_BRANCH AS_BRANCH=master JIRA=AS7-5815 CURRENT=4.17.2.Final NEXT=4.17.3.Final git clone git@github.com:jbosstm/jboss-as.git cd jboss-as git checkout $BRANCH git remote add upstream git://github.com/jbossas/jboss-as.git git pull --rebase --ff-only upstream $AS_BRANCH sed -i "s/$CURRENT-SNAPSHOT/$CURRENT/g" pom.xml git commit -am "Upgrade Narayana to $CURRENT" # should use git merge-base $BRANCH upstream/master # You will need to resolve som merge conflicts. Most likely around version numbers. git rebase -i HEAD~10 git checkout -b "${JIRA}_Upgrading_Narayana_to_${CURRENT}" git checkout $BRANCH sed -i "s/$CURRENT/$NEXT-SNAPSHOT/g" pom.xml git commit -am "Upgrade Narayana to $NEXT-SNAPSHOT" git push origin "${JIRA}_Upgrading_Narayana_to_${CURRENT}" git push origin $BRANCH h2. Build and release h3. blacktie windows binaries CURRENT=<Version to release. e.g 5.0.0.M2> On Windows: rem You need to build the windows version separately as we don't support cross compile git clone git(a)github.com (mailto:git@github.com):jbosstm/blacktie.git build.bat install -DskipTests scp blacktie/target/blacktie-$CURRENT-vc9x32-bin.zip <user>@<ipaddress>: h3. Narayana upload CURRENT=<Version to release. e.g 5.0.0.M2> mkdir -p ~/narayana/filemgmt.jboss.org/ On Linux: sshfs jbosstm(a)filemgmt.jboss.org (mailto:jbosstm@filemgmt.jboss.org): ~/narayana/filemgmt.jboss.org/ On MacOS: sshfs -o defer_permissions jbosstm(a)filemgmt.jboss.org (mailto:jbosstm@filemgmt.jboss.org): ~/narayana/filemgmt.jboss.org/ git clone git(a)github.com (mailto:git@github.com):jbosstm/narayana.git cd narayana git checkout $CURRENT On Linux: ant -f build-release-pkgs.xml dist downloads docs magnolia -Drsync=false On MacOS: ant -f build-release-pkgs.xml dist downloads docs magnolia h3. svn branches #Make sure your checkout has no local changes svn update svn status POINT_VERSION=5 NEXT_POINT_VERSION=6 #Update the version in text files find . -name \*.java -o -name \*.xml -o -name \*.properties -o -name \*.ent -o -name \INSTALL -o -name \README | grep -v ".svn" | grep -v target | xargs grep  -l "4[._]16" | xargs sed -i "s/4\([._]\)16\([._]\)${POINT_VERSION}\([._]\)Final-SNAPSHOT/4\116\2$POINT_VERSION\3Final/" svn commit -m "Updated to version 4.16.$POINT_VERSION.Final" #Tag the release: svn cp https://svn.jboss.org/repos/labs/labs/jbosstm/branches/JBOSSTS_4_16 https://svn.jboss.org/repos/labs/labs/jbosstm/branches/JBOSSTS_4_16 https://svn.jboss.org/repos/labs/labs/jbosstm/tags/JBOSSTS_4_16_4_Final/ https://svn.jboss.org/repos/labs/labs/jbosstm/tags/JBOSSTS_4_16_${POINT_V... -m "4.16.$POINT_VERSION" #Bump to next version using similar find to above find . -name \*.java -o -name \*.xml -o -name \*.properties -o -name \*.ent -o -name \INSTALL -o -name \README | grep -v ".svn" | grep -v target | xargs grep  -l "4[._]16" | xargs sed -i "s/4\([._]\)16\([._]\)${POINT_VERSION}\([._]\)Final/4\116\2${NEXT_POINT_VERSION}\3Final-SNAPSHOT/" svn commit -m "Updated to version 4.16.${NEXT_POINT_VERSION}.Final-SNAPSHOT" #Update the maven version of jbossts in our fork of JBossAS: https://github.com/jbosstm/jboss-as https://github.com/jbosstm/jboss-as git checkout 4_16_BRANCH git pull --rebase --ff-only #Check no local changes git status sed -i "s/4.16.${POINT_VERSION}.Final-SNAPSHOT/4.16.${NEXT_POINT_VERSION}.Final-SNAPSHOT/g" pom.xml git commit -am "Updated to 4.16.${NEXT_POINT_VERSION}.Final-SNAPSHOT" git push #Build and deploy the release to nexus staging: mkdir ~/filemgmt.jboss.org/ sshfs -o defer_permissions mailto:jbosstm@filemgmt.jboss.org jbosstm(a)filemgmt.jboss.org: ~/filemgmt.jboss.org/ svn switch https://svn.jboss.org/repos/labs/labs/jbosstm/tags/JBOSSTS_4_16_$ https://svn.jboss.org/repos/labs/labs/jbosstm/tags/JBOSSTS_4_16_${NEXT_PO... ant -f build-release-pkgs.xml dist mvn-repository downloads magnolia h3. h2. Release the artifact through Nexus 1. https://repository.jboss.org/nexus/index.html#welcome https://repository.jboss.org/nexus/index.html#welcome 2. login 3. "Staging Repositories" 4. Click tickbox for your repo 5. Click "Close" 6. Don't worry about a description, just click "Close" 7. Click tickbox after it is closed 8. Click "Release" 9. Again a description doesn't matter h2. Push Upstream Check that the pull request will work. *If it doesn't and it requires Narayana changes you *have* to rev the version number - DON'T attempt to re-release with the same version number:* JIRA=AS7-5815 CURRENT=4.17.2.Final git clone mailto:git@github.com git@github.com:jbosstm/jboss-as.git cd jboss-as git checkout "${JIRA}_Upgrading_Narayana_to_${CURRENT}" rm -rf ~/.m2/repository/org/jboss/jbossts rm -rf ~/.m2/repository/org/jboss/narayana ./build.sh clean install 1. Raise the pull request using our branch 2. Update http://172.17.131.2/view/Narayana+BlackTie-release/job/release-narayana-A... this job to run our CI over the PR. You need to re-run this every time you change the PR, top make sure it still works. 3. Once merged, resolve the AS7 Jira issue. h2. JIRA Release 1. Close all issues for the release 2. Mark as released (Need admin permissions) h2. Update Website Update the Narayana community site: * Login to Magnolia* https://www.jboss.org/author/.magnolia/pages/adminCentral.html https://www.jboss.org/author/.magnolia/pages/adminCentral.html * Login with credentials: Tom and Paul know these, ask them. * Documentation* Browse to 'jbosstm/documentation' * right click on 'downloads' and select 'import' * browse to the location of the 'website.jbosstm.documentation.4.16.5.Final.xml' file * Long left click on the file name and replace the '.' with '_'. * Right click on the new file and click 'move' * Drag the file to the top of the documentation list. * Right click on the new page and select 'open page...' * Check that the page looks right and that the download links work * Right click on the new page and select 'activate' * You now need to wait for the page to be moderated before it will appear. * Downloads* Browse to 'jbosstm/downloads' * right click on 'downloads' and select 'import' * browse to the location of the 'website.jbosstm.downloads.4.16.5.Final.xml' file * Long left click on the file name and replace the '.' with '_'. * Right click on the new file and click 'move' * Drag the file to the top of the downloads list. * Right click on the new page and select 'open page...' * Check that the page looks right and that the download links work * Right click on the new page and select 'activate' * You now need to wait for the page to be moderated before it will appear. * Announcement* Right click on 'jbosstm' and select 'open page...' * Click edit on the 'announcement' pane * Update the announcement for this release. * Right click on 'jbosstm' and select 'activate changes' * You now need to wait for the page to be moderated before it will appear. * Release notes* Right click on 'jbosstm' and select 'open page...' * Click edit on the 'getting started' pane on the right-hand-side * Edit the release notes url to point to the release notes for this version * Click save * Right click on 'jbosstm' and select 'activate changes' * You now need to wait for the page to be moderated before it will appear. h2. Update CI Update jobs, to use the new Version (quickstarts, etc). Need a ful list of steps here. h2. Checked the released Quickstarts Make sure the released quickstarts run against the released Narayana. Do this by updating this job: http://172.17.131.2/view/Narayana+BlackTie-release/job/release-btny-naray... http://172.17.131.2/view/Narayana+BlackTie-release/job/release-btny-naray... Need a ful list of steps here. h2. Promote NOTE: It is worth waiting for the merge of the pull request before advertising, or at least wait for the merge build notification first ;) Promote the release through the following channels: 1. Email jbossts-announce(a)lists.jboss.org (mailto:jbossts-announce@lists.jboss.org) 2. Forum 3. Blog: project in (jbtm, blacktie) AND fixversion = "5.0.0.M2" AND priority >= major AND issuetype not in (Bug, task) AND resolution not in ("Duplicate Issue", Rejected, "Won't Fix", "Out of Date", "Cannot Reproduce Bug") -------------------------------------------------------------- Comment by going to Community [https://community.jboss.org/docs/DOC-17433] Create a new document in JBoss Transactions Development at Community [https://community.jboss.org/choose-container!input.jspa?contentType=102&a...]