[JBoss Microcontainer Development POJO Server] - Re: Implementing a non-flat deployment for Weld Integration
6:33 a.m.
Flavia Rainone [http://community.jboss.org/people/flavia.rainone%40jboss.com] created the
discussion
"Re: Implementing a non-flat deployment for Weld Integration"
To view the discussion, visit: http://community.jboss.org/message/563989#563989
--------------------------------------------------------------
As the pseudocode below shows, we need to know which services should be added to the lib
BDAs:
Flavia Rainone wrote:
Roughly speaking, this is how we would fill in the gaps of the TODO mark you added in
your getLibraries method:
...
// finally create the Archive
Archive archive = ArchiveFactory.createArchive(archiveInfo, *new*
ArrayList<EjbDescriptor<?>>());
// ... and the corresponding BDA
ServiceRegistry serviceRegistry = *new* SimpleServiceRegistry();
// TODO: fill in serviceRegistry? With which services?
libs.add(archive.createBeanDeploymentArchive(serviceRegistry));
Right now, Ales is getting the following error because of the missing services:
IllegalStateException: WELD-000117 Required service
org.jboss.weld.injection.spi.ResourceInjectionServices
has not been specified
Pete or Marius, do you know which services we need to add to these BDAs?
This is one of the final missing pieces to close this issue :-)
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/563989#563989]
Start a new discussion in JBoss Microcontainer Development POJO Server at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
6:20 a.m.
Ales Justin [http://community.jboss.org/people/alesj] created the discussion
"Re: Implementing a non-flat deployment for Weld Integration"
To view the discussion, visit: http://community.jboss.org/message/563991#563991
--------------------------------------------------------------
Right now, Ales is getting the following error because of the missing
services:
IllegalStateException: WELD-000117 Required service
org.jboss.weld.injection.spi.ResourceInjectionServices
has not been specified
Pete or Marius, do you know which services we need to add to these BDAs?
This is one of the final missing pieces to close this issue :-)
Let me try no-op ServiceRegistry first ...
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/563991#563991]
Start a new discussion in JBoss Microcontainer Development POJO Server at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
6:14 a.m.
Ales Justin [http://community.jboss.org/people/alesj] created the discussion
"Re: Implementing a non-flat deployment for Weld Integration"
To view the discussion, visit: http://community.jboss.org/message/563998#563998
--------------------------------------------------------------
Let me try no-op ServiceRegistry first ...
This looks like it
might work.
But then I hit another issue: BeanDeploymentArchiveImpl::getBeansXml
public BeansXml getBeansXml()
{
Collection<URL> urls = archive.getXmlURLs();
if (urls.isEmpty())
{
return BeansXml.EMPTY_BEANS_XML;
}
return bootstrap.parse(urls);
}
The problem is that lib BDAs don't have bootstrap.
And bootstrap impl is only available in weld-core, which is dynamically added to
deployments != libs.
I could duplicate all beans xml parsing logic from weld-core,
but I don't see a reason why this couldn't be put into spi?
Pete?
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/563998#563998]
Start a new discussion in JBoss Microcontainer Development POJO Server at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
11:28 a.m.
Ales Justin [http://community.jboss.org/people/alesj] created the discussion
"Re: Implementing a non-flat deployment for Weld Integration"
To view the discussion, visit: http://community.jboss.org/message/567235#567235
--------------------------------------------------------------
OK, got past the "parse urls" issue.
App got deployed, but failed when looking for matching beans:
18:19:46,737 ERROR [org.jboss.kernel.plugins.dependency.AbstractKernelController] Error
installing to Start:
name=vfs:///Users/alesj/projects/jboss6/trunk/testsuite/output/lib/weld-translator3rdpartylib.ear_WeldBootstrapBean
state=Create: org.jboss.weld.exceptions.DeploymentException: WELD-001408 Unsatisfied
dependencies for type [SentenceParser] with qualifiers [@Default] at injection point
[[parameter 1] of [constructor] @Inject
org.jboss.test.deployers.weld.translator.ejb.TextTranslator(SentenceParser)]
at org.jboss.weld.bootstrap.Validator.validateInjectionPoint(Validator.java:294)
[:6.0.0-SNAPSHOT]
at org.jboss.weld.bootstrap.Validator.validateBean(Validator.java:132)
[:6.0.0-SNAPSHOT]
at org.jboss.weld.bootstrap.Validator.validateRIBean(Validator.java:151)
[:6.0.0-SNAPSHOT]
at org.jboss.weld.bootstrap.Validator.validateBeans(Validator.java:366)
[:6.0.0-SNAPSHOT]
at org.jboss.weld.bootstrap.Validator.validateDeployment(Validator.java:352)
[:6.0.0-SNAPSHOT]
at org.jboss.weld.bootstrap.WeldBootstrap.validateBeans(WeldBootstrap.java:436)
[:6.0.0-SNAPSHOT]
at
org.jboss.weld.integration.deployer.env.helpers.BootstrapBean.boot(BootstrapBean.java:124)
[:6.0.0-SNAPSHOT]
The "lib" is where it should be:
Skywalker:~ alesj$ cd jboss/build/target/jboss-6.0.0-SNAPSHOT/common/lib
Skywalker:lib alesj$ ls | grep weld
weld-api.jar
weld-translator-lib.jar
Skywalker:lib alesj$ jar -tf weld-translator-lib.jar
META-INF/
META-INF/MANIFEST.MF
org/
org/jboss/
org/jboss/test/
org/jboss/test/deployers/
org/jboss/test/deployers/weld/
org/jboss/test/deployers/weld/translator/
org/jboss/test/deployers/weld/translator/ejb/
org/jboss/test/deployers/weld/translator/ejb/SentenceParser.class
META-INF/beans.xml
The AS6 test is WeldTranslator3rdPartyLibExampleUnitTestCase.
You have to manually copy the weld-translator-lib.jar to common/lib/.
Any ideas?
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/567235#567235]
Start a new discussion in JBoss Microcontainer Development POJO Server at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
12:55 p.m.
Flavia Rainone [http://community.jboss.org/people/flavia.rainone%40jboss.com] created the
discussion
"Re: Implementing a non-flat deployment for Weld Integration"
To view the discussion, visit: http://community.jboss.org/message/567269#567269
--------------------------------------------------------------
Ales Justin wrote:
Any ideas?
Thanks for your help with this, Ales!
I'll take a look to see what's wrong.
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/567269#567269]
Start a new discussion in JBoss Microcontainer Development POJO Server at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
11:53 a.m.
Flavia Rainone [http://community.jboss.org/people/flavia.rainone%40jboss.com] created the
discussion
"Re: Implementing a non-flat deployment for Weld Integration"
To view the discussion, visit: http://community.jboss.org/message/567488#567488
--------------------------------------------------------------
Ales, your lib scanning code works like a charm :-)
The only piece that was missing is to uncomment the injection of libArchiveProvider into
ClasspathFactory:
<bean name="WeldClasspathFactory"
class="org.jboss.weld.integration.deployer.env.bda.ClasspathFactory">
<constructor factoryMethod="getInstance" />
<property name="system"><inject
bean="ClassLoaderSystem"/></property>
<!-- Disable until we fix the loop -->
<!-- property name=libArchivesProvider><inject
bean="LibsDiscoveryService"/></property -->
</bean>
The fix is committed to JBoss AS trunk.
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/567488#567488]
Start a new discussion in JBoss Microcontainer Development POJO Server at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
11:56 a.m.
Ales Justin [http://community.jboss.org/people/alesj] created the discussion
"Re: Implementing a non-flat deployment for Weld Integration"
To view the discussion, visit: http://community.jboss.org/message/567489#567489
--------------------------------------------------------------
Ah. :-) Great to hear this!
I guess we're done?
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/567489#567489]
Start a new discussion in JBoss Microcontainer Development POJO Server at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
12:49 p.m.
Flavia Rainone [http://community.jboss.org/people/flavia.rainone%40jboss.com] created the
discussion
"Re: Implementing a non-flat deployment for Weld Integration"
To view the discussion, visit: http://community.jboss.org/message/567501#567501
--------------------------------------------------------------
Ales Justin wrote:
Ah. :-) Great to hear this!
I guess we're done?
I guess so :)
I'm wondering, though, if there is a way of enabling
WeldTranslator3rdPartyLibExampleUnitTestCase as part of the deployers testsuite. That
would require the weld-translator-lib.jar to be automatically copied to common/lib, which
I'm not sure is possible as build.sh test assumes the server to be already up and
running.
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/567501#567501]
Start a new discussion in JBoss Microcontainer Development POJO Server at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
5:46 a.m.
Ales Justin [http://community.jboss.org/people/alesj] created the discussion
"Re: Implementing a non-flat deployment for Weld Integration"
To view the discussion, visit: http://community.jboss.org/message/567633#567633
--------------------------------------------------------------
I'm wondering, though, if there is a way of enabling
WeldTranslator3rdPartyLibExampleUnitTestCase as part of the deployers testsuite. That
would require the weld-translator-lib.jar to be automatically copied to common/lib, which
I'm not sure is possible as build.sh test assumes the server to be already up and
running.
We would need a new server config just for this test.
I'll try to add this asap.
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/567633#567633]
Start a new discussion in JBoss Microcontainer Development POJO Server at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
5175
days inactive
5197
days old
jboss-dev-forums@lists.jboss.org
8 comments
2 participants
participants (2)
-
Ales Justin -
Flavia Rainone