12:55 a.m.
Hi,
I hope one of you nice people will be able to help.
I'm trying to setup Guvnor for development and debugging in eclipse in
hopes of being able to contribute. However I have spent a couple of days
now trying to get it setup but I keep running into problems.
Now when I try to run it I get
Loading modules
org.drools.guvnor.FastCompiledGuvnor
Loading inherited module 'org.drools.guvnor.Guvnor'
[ERROR] Unable to load class
'org.drools.guvnor.gwtutil.PerspectiveFactoryGenerator'
java.lang.ClassNotFoundException:
org.drools.guvnor.gwtutil.PerspectiveFactoryGenerator
Full stacktrace is included in an attachment. I get the same error when I
run mvn gwt:compile on the command line.
mvn clean install -DskipTests runs fine without errors and reporting
success.
Any pointers to other guides that I could follow apart from the
droolsjbpm-build-bootstrap/readme
Kind Regards
Mikael Lönneberg (gwendo)
4:38 a.m.
Are you using the master branch?
How are you running the application in Eclipse?
Since the move to Seam 3 I have found I need to set the project to use an
external WAR folder, rather than simply run as GWT Web Application.
On 2 November 2011 05:55, Mikael Lönneberg <emil(a)snickeboa.com> wrote:
Hi,
I hope one of you nice people will be able to help.
I'm trying to setup Guvnor for development and debugging in eclipse in
hopes of being able to contribute. However I have spent a couple of days
now trying to get it setup but I keep running into problems.
Now when I try to run it I get
Loading modules
org.drools.guvnor.FastCompiledGuvnor
Loading inherited module 'org.drools.guvnor.Guvnor'
[ERROR] Unable to load class
'org.drools.guvnor.gwtutil.PerspectiveFactoryGenerator'
java.lang.ClassNotFoundException:
org.drools.guvnor.gwtutil.PerspectiveFactoryGenerator
Full stacktrace is included in an attachment. I get the same error when I
run mvn gwt:compile on the command line.
mvn clean install -DskipTests runs fine without errors and reporting
success.
Any pointers to other guides that I could follow apart from the
droolsjbpm-build-bootstrap/readme
Kind Regards
Mikael Lönneberg (gwendo)
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-dev
6:41 a.m.
Yes I'm running the Master branch. I tried to run it following the
instructions in the readme:
Run GWT in hosted mode
- Open menu *Run*, menu item *Run configurations...*
- In the list, select *Web Application*, button *new launch configuration
*
- Tab *Main*, Project: guvnor-webapp
- Tab *GWT*, list *Available Modules*: Guvnor - org.drools.guvnor
- Tab *GWT*, textfield *URL*: org.drools.guvnor.Guvnor/Guvnor.html
- Button *Run*.
In my Run Configuration I have the following arguments -war
/home/miklo/workspace-drools/guvnor/guvnor-webapp/target -remoteUI
"${gwt_remote_ui_server_port}:${unique_id}" -startupUrl
'org.drools.guvnor.Guvnor/Guvnor.html' -logLevel INFO -codeServerPort 9997
-port 8888 org.drools.guvnor.FastCompiledGuvnor
Where do I set it up to use an external WAR folder?
Should I do something different?
Kind Regards
Mikael
On Wed, Nov 2, 2011 at 10:38 AM, Michael Anstis <michael.anstis(a)gmail.com>wrote:
Are you using the master branch?
How are you running the application in Eclipse?
Since the move to Seam 3 I have found I need to set the project to use an
external WAR folder, rather than simply run as GWT Web Application.
On 2 November 2011 05:55, Mikael Lönneberg <emil(a)snickeboa.com> wrote:
> Hi,
>
> I hope one of you nice people will be able to help.
> I'm trying to setup Guvnor for development and debugging in eclipse in
> hopes of being able to contribute. However I have spent a couple of days
> now trying to get it setup but I keep running into problems.
> Now when I try to run it I get
> Loading modules
> org.drools.guvnor.FastCompiledGuvnor
> Loading inherited module 'org.drools.guvnor.Guvnor'
> [ERROR] Unable to load class
> 'org.drools.guvnor.gwtutil.PerspectiveFactoryGenerator'
> java.lang.ClassNotFoundException:
> org.drools.guvnor.gwtutil.PerspectiveFactoryGenerator
>
> Full stacktrace is included in an attachment. I get the same error when I
> run mvn gwt:compile on the command line.
> mvn clean install -DskipTests runs fine without errors and reporting
> success.
>
> Any pointers to other guides that I could follow apart from the
> droolsjbpm-build-bootstrap/readme
>
>
> Kind Regards
>
> Mikael Lönneberg (gwendo)
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
>
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-dev
6:50 a.m.
In the project properties, set Google->Web Application->This project has a
WAR directory to "target/guvnor-webapp-5.4.0-SNAPSHOT" (will be different
with different versions).
My run config is as follows:-
*Main class ("Main" tab in the run config)
*com.google.gwt.dev.DevMode
*Program arguments ("Arguments" tab in the run config)
*-war
/home/manstis/workspaces/git/droolsjbpm/guvnor/guvnor-webapp/target/guvnor-webapp-5.4.0-SNAPSHOT
-remoteUI "${gwt_remote_ui_server_port}:${unique_id}" -startupUrl index.jsp
-logLevel INFO -codeServerPort 9997 -port 8888
org.drools.guvnor.FastCompiledGuvnor org.drools.guvnor.Guvnor
Jervis Liu (jliu, on #guvnor) also has problems running from within Eclipse
and we hope to try to work together tomorrow to resolve. I don't know if
his problem is identical to yours.
I've seen the error you report, but usually refreshing the project in
Eclipse makes it disappear (not sure if it is concidental, but I normally
refresh after mvn -clean -install'ing... and don't experience your problem).
Have a try and let me know....
On 2 November 2011 11:41, Mikael Lönneberg <emil(a)snickeboa.com> wrote:
Yes I'm running the Master branch. I tried to run it following
the
instructions in the readme:
Run GWT in hosted mode
- Open menu *Run*, menu item *Run configurations...*
- In the list, select *Web Application*, button *new launch
configuration*
- Tab *Main*, Project: guvnor-webapp
- Tab *GWT*, list *Available Modules*: Guvnor - org.drools.guvnor
- Tab *GWT*, textfield *URL*: org.drools.guvnor.Guvnor/Guvnor.html
- Button *Run*.
In my Run Configuration I have the following arguments -war
/home/miklo/workspace-drools/guvnor/guvnor-webapp/target -remoteUI
"${gwt_remote_ui_server_port}:${unique_id}" -startupUrl
'org.drools.guvnor.Guvnor/Guvnor.html' -logLevel INFO -codeServerPort 9997
-port 8888 org.drools.guvnor.FastCompiledGuvnor
Where do I set it up to use an external WAR folder?
Should I do something different?
Kind Regards
Mikael
On Wed, Nov 2, 2011 at 10:38 AM, Michael Anstis <michael.anstis(a)gmail.com>wrote:
> Are you using the master branch?
>
> How are you running the application in Eclipse?
>
> Since the move to Seam 3 I have found I need to set the project to use an
> external WAR folder, rather than simply run as GWT Web Application.
>
> On 2 November 2011 05:55, Mikael Lönneberg <emil(a)snickeboa.com> wrote:
>
>> Hi,
>>
>> I hope one of you nice people will be able to help.
>> I'm trying to setup Guvnor for development and debugging in eclipse in
>> hopes of being able to contribute. However I have spent a couple of days
>> now trying to get it setup but I keep running into problems.
>> Now when I try to run it I get
>> Loading modules
>> org.drools.guvnor.FastCompiledGuvnor
>> Loading inherited module 'org.drools.guvnor.Guvnor'
>> [ERROR] Unable to load class
>> 'org.drools.guvnor.gwtutil.PerspectiveFactoryGenerator'
>> java.lang.ClassNotFoundException:
>> org.drools.guvnor.gwtutil.PerspectiveFactoryGenerator
>>
>> Full stacktrace is included in an attachment. I get the same error when
>> I run mvn gwt:compile on the command line.
>> mvn clean install -DskipTests runs fine without errors and reporting
>> success.
>>
>> Any pointers to other guides that I could follow apart from the
>> droolsjbpm-build-bootstrap/readme
>>
>>
>> Kind Regards
>>
>> Mikael Lönneberg (gwendo)
>>
>> _______________________________________________
>> rules-dev mailing list
>> rules-dev(a)lists.jboss.org
>> https://lists.jboss.org/mailman/listinfo/rules-dev
>>
>>
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
>
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-dev
7:53 a.m.
Thanks for your help so far, your advice got me a bit further but now I get
the following error:
Starting Jetty on port 8888
[WARN] Failed startup of context
com.google.gwt.dev.shell.jetty.JettyLauncher$WebAppContextWithReload@5b24dfa8
{/,/home/miklo/workspace-drools/guvnor/guvnor-webapp/target/guvnor-webapp-5.4.0-SNAPSHOT}
org.jboss.weld.exceptions.DeploymentException: WELD-001408 Unsatisfied
dependencies for type [Logger] with qualifiers [@Default] at injection
point [[field] @Inject
org.jboss.seam.security.permission.SecurityRuleLoader.log]
at
org.jboss.weld.bootstrap.Validator.validateInjectionPoint(Validator.java:270)
at org.jboss.weld.bootstrap.Validator.validateBean(Validator.java:106)
at org.jboss.weld.bootstrap.Validator.validateRIBean(Validator.java:129)
at org.jboss.weld.bootstrap.Validator.validateBeans(Validator.java:351)
---- 8< ----------------
This seams to be seam related, but as I have never worked with seam before
I don't really know how to start troubleshooting it.
/Mikael
On Wed, Nov 2, 2011 at 12:50 PM, Michael Anstis <michael.anstis(a)gmail.com>wrote:
In the project properties, set Google->Web Application->This
project has a
WAR directory to "target/guvnor-webapp-5.4.0-SNAPSHOT" (will be different
with different versions).
My run config is as follows:-
*Main class ("Main" tab in the run config)
*com.google.gwt.dev.DevMode
*Program arguments ("Arguments" tab in the run config)
*-war
/home/manstis/workspaces/git/droolsjbpm/guvnor/guvnor-webapp/target/guvnor-webapp-5.4.0-SNAPSHOT
-remoteUI "${gwt_remote_ui_server_port}:${unique_id}" -startupUrl index.jsp
-logLevel INFO -codeServerPort 9997 -port 8888
org.drools.guvnor.FastCompiledGuvnor org.drools.guvnor.Guvnor
Jervis Liu (jliu, on #guvnor) also has problems running from within
Eclipse and we hope to try to work together tomorrow to resolve. I don't
know if his problem is identical to yours.
I've seen the error you report, but usually refreshing the project in
Eclipse makes it disappear (not sure if it is concidental, but I normally
refresh after mvn -clean -install'ing... and don't experience your problem).
Have a try and let me know....
On 2 November 2011 11:41, Mikael Lönneberg <emil(a)snickeboa.com> wrote:
> Yes I'm running the Master branch. I tried to run it following the
> instructions in the readme:
>
> Run GWT in hosted mode
>
> - Open menu *Run*, menu item *Run configurations...*
> - In the list, select *Web Application*, button *new launch
> configuration*
> - Tab *Main*, Project: guvnor-webapp
> - Tab *GWT*, list *Available Modules*: Guvnor - org.drools.guvnor
> - Tab *GWT*, textfield *URL*: org.drools.guvnor.Guvnor/Guvnor.html
> - Button *Run*.
>
>
>
> In my Run Configuration I have the following arguments -war
> /home/miklo/workspace-drools/guvnor/guvnor-webapp/target -remoteUI
> "${gwt_remote_ui_server_port}:${unique_id}" -startupUrl
> 'org.drools.guvnor.Guvnor/Guvnor.html' -logLevel INFO -codeServerPort 9997
> -port 8888 org.drools.guvnor.FastCompiledGuvnor
>
> Where do I set it up to use an external WAR folder?
>
> Should I do something different?
>
> Kind Regards
>
> Mikael
>
> On Wed, Nov 2, 2011 at 10:38 AM, Michael Anstis <michael.anstis(a)gmail.com
> > wrote:
>
>> Are you using the master branch?
>>
>> How are you running the application in Eclipse?
>>
>> Since the move to Seam 3 I have found I need to set the project to use
>> an external WAR folder, rather than simply run as GWT Web Application.
>>
>> On 2 November 2011 05:55, Mikael Lönneberg <emil(a)snickeboa.com> wrote:
>>
>>> Hi,
>>>
>>> I hope one of you nice people will be able to help.
>>> I'm trying to setup Guvnor for development and debugging in eclipse in
>>> hopes of being able to contribute. However I have spent a couple of days
>>> now trying to get it setup but I keep running into problems.
>>> Now when I try to run it I get
>>> Loading modules
>>> org.drools.guvnor.FastCompiledGuvnor
>>> Loading inherited module 'org.drools.guvnor.Guvnor'
>>> [ERROR] Unable to load class
>>> 'org.drools.guvnor.gwtutil.PerspectiveFactoryGenerator'
>>> java.lang.ClassNotFoundException:
>>> org.drools.guvnor.gwtutil.PerspectiveFactoryGenerator
>>>
>>> Full stacktrace is included in an attachment. I get the same error when
>>> I run mvn gwt:compile on the command line.
>>> mvn clean install -DskipTests runs fine without errors and reporting
>>> success.
>>>
>>> Any pointers to other guides that I could follow apart from the
>>> droolsjbpm-build-bootstrap/readme
>>>
>>>
>>> Kind Regards
>>>
>>> Mikael Lönneberg (gwendo)
>>>
>>> _______________________________________________
>>> rules-dev mailing list
>>> rules-dev(a)lists.jboss.org
>>> https://lists.jboss.org/mailman/listinfo/rules-dev
>>>
>>>
>>
>> _______________________________________________
>> rules-dev mailing list
>> rules-dev(a)lists.jboss.org
>> https://lists.jboss.org/mailman/listinfo/rules-dev
>>
>>
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
>
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-dev
8:14 a.m.
Is this error persistent?
Sometimes I get errors relating to Logger on start-up and refreshing the
browser causes it to disappear.
I don't get it all the time, just occasionally.
On 2 November 2011 12:53, Mikael Lönneberg <emil(a)snickeboa.com> wrote:
Thanks for your help so far, your advice got me a bit further but now
I
get the following error:
Starting Jetty on port 8888
[WARN] Failed startup of context
com.google.gwt.dev.shell.jetty.JettyLauncher$WebAppContextWithReload@5b24dfa8
{/,/home/miklo/workspace-drools/guvnor/guvnor-webapp/target/guvnor-webapp-5.4.0-SNAPSHOT}
org.jboss.weld.exceptions.DeploymentException: WELD-001408 Unsatisfied
dependencies for type [Logger] with qualifiers [@Default] at injection
point [[field] @Inject
org.jboss.seam.security.permission.SecurityRuleLoader.log]
at
org.jboss.weld.bootstrap.Validator.validateInjectionPoint(Validator.java:270)
at org.jboss.weld.bootstrap.Validator.validateBean(Validator.java:106)
at org.jboss.weld.bootstrap.Validator.validateRIBean(Validator.java:129)
at org.jboss.weld.bootstrap.Validator.validateBeans(Validator.java:351)
---- 8< ----------------
This seams to be seam related, but as I have never worked with seam before
I don't really know how to start troubleshooting it.
/Mikael
On Wed, Nov 2, 2011 at 12:50 PM, Michael Anstis <michael.anstis(a)gmail.com>wrote:
> In the project properties, set Google->Web Application->This project has
> a WAR directory to "target/guvnor-webapp-5.4.0-SNAPSHOT" (will be
different
> with different versions).
>
> My run config is as follows:-
>
> *Main class ("Main" tab in the run config)
> *com.google.gwt.dev.DevMode
>
> *Program arguments ("Arguments" tab in the run config)
> *-war
>
/home/manstis/workspaces/git/droolsjbpm/guvnor/guvnor-webapp/target/guvnor-webapp-5.4.0-SNAPSHOT
> -remoteUI "${gwt_remote_ui_server_port}:${unique_id}" -startupUrl
index.jsp
> -logLevel INFO -codeServerPort 9997 -port 8888
> org.drools.guvnor.FastCompiledGuvnor org.drools.guvnor.Guvnor
>
> Jervis Liu (jliu, on #guvnor) also has problems running from within
> Eclipse and we hope to try to work together tomorrow to resolve. I don't
> know if his problem is identical to yours.
>
> I've seen the error you report, but usually refreshing the project in
> Eclipse makes it disappear (not sure if it is concidental, but I normally
> refresh after mvn -clean -install'ing... and don't experience your problem).
>
> Have a try and let me know....
>
>
> On 2 November 2011 11:41, Mikael Lönneberg <emil(a)snickeboa.com> wrote:
>
>> Yes I'm running the Master branch. I tried to run it following the
>> instructions in the readme:
>>
>> Run GWT in hosted mode
>>
>> - Open menu *Run*, menu item *Run configurations...*
>> - In the list, select *Web Application*, button *new launch
>> configuration*
>> - Tab *Main*, Project: guvnor-webapp
>> - Tab *GWT*, list *Available Modules*: Guvnor - org.drools.guvnor
>> - Tab *GWT*, textfield *URL*: org.drools.guvnor.Guvnor/Guvnor.html
>> - Button *Run*.
>>
>>
>>
>> In my Run Configuration I have the following arguments -war
>> /home/miklo/workspace-drools/guvnor/guvnor-webapp/target -remoteUI
>> "${gwt_remote_ui_server_port}:${unique_id}" -startupUrl
>> 'org.drools.guvnor.Guvnor/Guvnor.html' -logLevel INFO -codeServerPort
9997
>> -port 8888 org.drools.guvnor.FastCompiledGuvnor
>>
>> Where do I set it up to use an external WAR folder?
>>
>> Should I do something different?
>>
>> Kind Regards
>>
>> Mikael
>>
>> On Wed, Nov 2, 2011 at 10:38 AM, Michael Anstis <
>> michael.anstis(a)gmail.com> wrote:
>>
>>> Are you using the master branch?
>>>
>>> How are you running the application in Eclipse?
>>>
>>> Since the move to Seam 3 I have found I need to set the project to use
>>> an external WAR folder, rather than simply run as GWT Web Application.
>>>
>>> On 2 November 2011 05:55, Mikael Lönneberg <emil(a)snickeboa.com> wrote:
>>>
>>>> Hi,
>>>>
>>>> I hope one of you nice people will be able to help.
>>>> I'm trying to setup Guvnor for development and debugging in eclipse
in
>>>> hopes of being able to contribute. However I have spent a couple of days
>>>> now trying to get it setup but I keep running into problems.
>>>> Now when I try to run it I get
>>>> Loading modules
>>>> org.drools.guvnor.FastCompiledGuvnor
>>>> Loading inherited module 'org.drools.guvnor.Guvnor'
>>>> [ERROR] Unable to load class
>>>> 'org.drools.guvnor.gwtutil.PerspectiveFactoryGenerator'
>>>> java.lang.ClassNotFoundException:
>>>> org.drools.guvnor.gwtutil.PerspectiveFactoryGenerator
>>>>
>>>> Full stacktrace is included in an attachment. I get the same error
>>>> when I run mvn gwt:compile on the command line.
>>>> mvn clean install -DskipTests runs fine without errors and reporting
>>>> success.
>>>>
>>>> Any pointers to other guides that I could follow apart from the
>>>> droolsjbpm-build-bootstrap/readme
>>>>
>>>>
>>>> Kind Regards
>>>>
>>>> Mikael Lönneberg (gwendo)
>>>>
>>>> _______________________________________________
>>>> rules-dev mailing list
>>>> rules-dev(a)lists.jboss.org
>>>> https://lists.jboss.org/mailman/listinfo/rules-dev
>>>>
>>>>
>>>
>>> _______________________________________________
>>> rules-dev mailing list
>>> rules-dev(a)lists.jboss.org
>>> https://lists.jboss.org/mailman/listinfo/rules-dev
>>>
>>>
>>
>> _______________________________________________
>> rules-dev mailing list
>> rules-dev(a)lists.jboss.org
>> https://lists.jboss.org/mailman/listinfo/rules-dev
>>
>>
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
>
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-dev
8:31 a.m.
Yes it seems to be persistent, I have attached the startup log. I've tried
restarting it a 3-4 times
/Mikael
On Wed, Nov 2, 2011 at 2:14 PM, Michael Anstis <michael.anstis(a)gmail.com>wrote:
Is this error persistent?
Sometimes I get errors relating to Logger on start-up and refreshing the
browser causes it to disappear.
I don't get it all the time, just occasionally.
On 2 November 2011 12:53, Mikael Lönneberg <emil(a)snickeboa.com> wrote:
> Thanks for your help so far, your advice got me a bit further but now I
> get the following error:
>
> Starting Jetty on port 8888
> [WARN] Failed startup of context
> com.google.gwt.dev.shell.jetty.JettyLauncher$WebAppContextWithReload@5b24dfa8
>
{/,/home/miklo/workspace-drools/guvnor/guvnor-webapp/target/guvnor-webapp-5.4.0-SNAPSHOT}
> org.jboss.weld.exceptions.DeploymentException: WELD-001408 Unsatisfied
> dependencies for type [Logger] with qualifiers [@Default] at injection
> point [[field] @Inject
> org.jboss.seam.security.permission.SecurityRuleLoader.log]
> at
> org.jboss.weld.bootstrap.Validator.validateInjectionPoint(Validator.java:270)
> at org.jboss.weld.bootstrap.Validator.validateBean(Validator.java:106)
> at org.jboss.weld.bootstrap.Validator.validateRIBean(Validator.java:129)
> at org.jboss.weld.bootstrap.Validator.validateBeans(Validator.java:351)
> ---- 8< ----------------
>
> This seams to be seam related, but as I have never worked with seam
> before I don't really know how to start troubleshooting it.
>
> /Mikael
>
>
> On Wed, Nov 2, 2011 at 12:50 PM, Michael Anstis <michael.anstis(a)gmail.com
> > wrote:
>
>> In the project properties, set Google->Web Application->This project has
>> a WAR directory to "target/guvnor-webapp-5.4.0-SNAPSHOT" (will be
different
>> with different versions).
>>
>> My run config is as follows:-
>>
>> *Main class ("Main" tab in the run config)
>> *com.google.gwt.dev.DevMode
>>
>> *Program arguments ("Arguments" tab in the run config)
>> *-war
>>
/home/manstis/workspaces/git/droolsjbpm/guvnor/guvnor-webapp/target/guvnor-webapp-5.4.0-SNAPSHOT
>> -remoteUI "${gwt_remote_ui_server_port}:${unique_id}" -startupUrl
index.jsp
>> -logLevel INFO -codeServerPort 9997 -port 8888
>> org.drools.guvnor.FastCompiledGuvnor org.drools.guvnor.Guvnor
>>
>> Jervis Liu (jliu, on #guvnor) also has problems running from within
>> Eclipse and we hope to try to work together tomorrow to resolve. I don't
>> know if his problem is identical to yours.
>>
>> I've seen the error you report, but usually refreshing the project in
>> Eclipse makes it disappear (not sure if it is concidental, but I normally
>> refresh after mvn -clean -install'ing... and don't experience your
problem).
>>
>> Have a try and let me know....
>>
>>
>> On 2 November 2011 11:41, Mikael Lönneberg <emil(a)snickeboa.com> wrote:
>>
>>> Yes I'm running the Master branch. I tried to run it following the
>>> instructions in the readme:
>>>
>>> Run GWT in hosted mode
>>>
>>> - Open menu *Run*, menu item *Run configurations...*
>>> - In the list, select *Web Application*, button *new launch
>>> configuration*
>>> - Tab *Main*, Project: guvnor-webapp
>>> - Tab *GWT*, list *Available Modules*: Guvnor - org.drools.guvnor
>>> - Tab *GWT*, textfield *URL*: org.drools.guvnor.Guvnor/Guvnor.html
>>> - Button *Run*.
>>>
>>>
>>>
>>> In my Run Configuration I have the following arguments -war
>>> /home/miklo/workspace-drools/guvnor/guvnor-webapp/target -remoteUI
>>> "${gwt_remote_ui_server_port}:${unique_id}" -startupUrl
>>> 'org.drools.guvnor.Guvnor/Guvnor.html' -logLevel INFO -codeServerPort
9997
>>> -port 8888 org.drools.guvnor.FastCompiledGuvnor
>>>
>>> Where do I set it up to use an external WAR folder?
>>>
>>> Should I do something different?
>>>
>>> Kind Regards
>>>
>>> Mikael
>>>
>>> On Wed, Nov 2, 2011 at 10:38 AM, Michael Anstis <
>>> michael.anstis(a)gmail.com> wrote:
>>>
>>>> Are you using the master branch?
>>>>
>>>> How are you running the application in Eclipse?
>>>>
>>>> Since the move to Seam 3 I have found I need to set the project to use
>>>> an external WAR folder, rather than simply run as GWT Web Application.
>>>>
>>>> On 2 November 2011 05:55, Mikael Lönneberg <emil(a)snickeboa.com>
wrote:
>>>>
>>>>> Hi,
>>>>>
>>>>> I hope one of you nice people will be able to help.
>>>>> I'm trying to setup Guvnor for development and debugging in
eclipse
>>>>> in hopes of being able to contribute. However I have spent a couple
of days
>>>>> now trying to get it setup but I keep running into problems.
>>>>> Now when I try to run it I get
>>>>> Loading modules
>>>>> org.drools.guvnor.FastCompiledGuvnor
>>>>> Loading inherited module 'org.drools.guvnor.Guvnor'
>>>>> [ERROR] Unable to load class
>>>>> 'org.drools.guvnor.gwtutil.PerspectiveFactoryGenerator'
>>>>> java.lang.ClassNotFoundException:
>>>>> org.drools.guvnor.gwtutil.PerspectiveFactoryGenerator
>>>>>
>>>>> Full stacktrace is included in an attachment. I get the same error
>>>>> when I run mvn gwt:compile on the command line.
>>>>> mvn clean install -DskipTests runs fine without errors and reporting
>>>>> success.
>>>>>
>>>>> Any pointers to other guides that I could follow apart from the
>>>>> droolsjbpm-build-bootstrap/readme
>>>>>
>>>>>
>>>>> Kind Regards
>>>>>
>>>>> Mikael Lönneberg (gwendo)
>>>>>
>>>>> _______________________________________________
>>>>> rules-dev mailing list
>>>>> rules-dev(a)lists.jboss.org
>>>>> https://lists.jboss.org/mailman/listinfo/rules-dev
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> rules-dev mailing list
>>>> rules-dev(a)lists.jboss.org
>>>> https://lists.jboss.org/mailman/listinfo/rules-dev
>>>>
>>>>
>>>
>>> _______________________________________________
>>> rules-dev mailing list
>>> rules-dev(a)lists.jboss.org
>>> https://lists.jboss.org/mailman/listinfo/rules-dev
>>>
>>>
>>
>> _______________________________________________
>> rules-dev mailing list
>> rules-dev(a)lists.jboss.org
>> https://lists.jboss.org/mailman/listinfo/rules-dev
>>
>>
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
>
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-dev
11:21 a.m.
Master should be on seam beta4, which fixed that logmanager thing from beta3
Pls verify the seam version in your classpath
--
View this message in context:
http://drools.46999.n3.nabble.com/Problem-setting-up-Guvnor-to-run-in-hos...
Sent from the Drools: Developer (committer) mailing list mailing list archive at
Nabble.com.
2:03 p.m.
Beta4 is the version on my classpath, I also tried deploying the built WAR
file on a standalone jboss as 7 server and that failed as well..
/Mikael
On Wed, Nov 2, 2011 at 5:21 PM, ge0ffrey <ge0ffrey.spam(a)gmail.com> wrote:
Master should be on seam beta4, which fixed that logmanager thing
from
beta3
Pls verify the seam version in your classpath
--
View this message in context:
http://drools.46999.n3.nabble.com/Problem-setting-up-Guvnor-to-run-in-hos...
Sent from the Drools: Developer (committer) mailing list mailing list
archive at Nabble.com.
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-dev
6:08 a.m.
I've spent a day on this. What I found is that I can run guvnor from
Eclipse using the WAR configuration as Mike mentioned. Below is the
configuration that works:
Linux, Eclipse 3.6.2, Jdk 1.6.0_29, Google plugin for Eclipse 2.4.2 (the
latest version from the update site), GWT SDK 2.3.0.
The configuration does not work is:
Windows 7, Eclipse 3.6.2, Jdk 1.6.0_25, Google plugin for Eclipse 2.4.2,
GWT SDK 2.3.0.
I still have not figured out yet if this issue is a platform specific one.
Cheers,
Jervis
Mikael Lönneberg wrote:
Beta4 is the version on my classpath, I also tried deploying the
built
WAR file on a standalone jboss as 7 server and that failed as well..
/Mikael
On Wed, Nov 2, 2011 at 5:21 PM, ge0ffrey <ge0ffrey.spam(a)gmail.com
<mailto:ge0ffrey.spam@gmail.com>> wrote:
Master should be on seam beta4, which fixed that logmanager thing
from beta3
Pls verify the seam version in your classpath
--
View this message in context:
http://drools.46999.n3.nabble.com/Problem-setting-up-Guvnor-to-run-in-hos...
Sent from the Drools: Developer (committer) mailing list mailing
list archive at Nabble.com.
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/rules-dev
------------------------------------------------------------------------
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-dev
6:30 a.m.
I did NOT get it to run using the following configuration
Linux( Ubuntu ), Eclipse 3.6.2, Google plugin for Eclipse 2.4.2,
GWT SDK 2.3.0.
I Don't have my computer here so I can't check the java version at this
time.
I'm not sure, but it doesn't seem platform specific. I believe there is
somethingelse causing this but I'm not sure what.
I'll try to make a clean install of everything and see if that works.
/Kind Regards
Mikael
On Thu, Nov 3, 2011 at 12:08 PM, Jervis Liu <jliu(a)redhat.com> wrote:
I've spent a day on this. What I found is that I can run guvnor
from
Eclipse using the WAR configuration as Mike mentioned. Below is the
configuration that works:
Linux, Eclipse 3.6.2, Jdk 1.6.0_29, Google plugin for Eclipse 2.4.2 (the
latest version from the update site), GWT SDK 2.3.0.
The configuration does not work is:
Windows 7, Eclipse 3.6.2, Jdk 1.6.0_25, Google plugin for Eclipse 2.4.2,
GWT SDK 2.3.0.
I still have not figured out yet if this issue is a platform specific one.
Cheers,
Jervis
Mikael Lönneberg wrote:
> Beta4 is the version on my classpath, I also tried deploying the built
> WAR file on a standalone jboss as 7 server and that failed as well..
>
> /Mikael
>
> On Wed, Nov 2, 2011 at 5:21 PM, ge0ffrey <ge0ffrey.spam(a)gmail.com
> <mailto:ge0ffrey.spam@gmail.com>> wrote:
>
> Master should be on seam beta4, which fixed that logmanager thing
> from beta3
> Pls verify the seam version in your classpath
>
> --
> View this message in context:
>
http://drools.46999.n3.nabble.com/Problem-setting-up-Guvnor-to-run-in-hos...
> Sent from the Drools: Developer (committer) mailing list mailing
> list archive at Nabble.com.
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-dev
6:37 a.m.
I run (successfully):-
Linux (Ubuntu 11.04)
Eclipse 3.6.2
JRE 1.6.0_23
GWT 2.3.0
GWT plugin 2.4.1
On 3 November 2011 11:30, Mikael Lönneberg <emil(a)snickeboa.com> wrote:
I did NOT get it to run using the following configuration
Linux( Ubuntu ), Eclipse 3.6.2, Google plugin for Eclipse 2.4.2,
GWT SDK 2.3.0.
I Don't have my computer here so I can't check the java version at this
time.
I'm not sure, but it doesn't seem platform specific. I believe there is
somethingelse causing this but I'm not sure what.
I'll try to make a clean install of everything and see if that works.
/Kind Regards
Mikael
On Thu, Nov 3, 2011 at 12:08 PM, Jervis Liu <jliu(a)redhat.com> wrote:
> I've spent a day on this. What I found is that I can run guvnor from
> Eclipse using the WAR configuration as Mike mentioned. Below is the
> configuration that works:
>
> Linux, Eclipse 3.6.2, Jdk 1.6.0_29, Google plugin for Eclipse 2.4.2 (the
> latest version from the update site), GWT SDK 2.3.0.
>
> The configuration does not work is:
> Windows 7, Eclipse 3.6.2, Jdk 1.6.0_25, Google plugin for Eclipse 2.4.2,
> GWT SDK 2.3.0.
>
> I still have not figured out yet if this issue is a platform specific one.
>
> Cheers,
> Jervis
>
> Mikael Lönneberg wrote:
> > Beta4 is the version on my classpath, I also tried deploying the built
> > WAR file on a standalone jboss as 7 server and that failed as well..
> >
> > /Mikael
> >
> > On Wed, Nov 2, 2011 at 5:21 PM, ge0ffrey <ge0ffrey.spam(a)gmail.com
> > <mailto:ge0ffrey.spam@gmail.com>> wrote:
> >
> > Master should be on seam beta4, which fixed that logmanager thing
> > from beta3
> > Pls verify the seam version in your classpath
> >
> > --
> > View this message in context:
> >
>
http://drools.46999.n3.nabble.com/Problem-setting-up-Guvnor-to-run-in-hos...
> > Sent from the Drools: Developer (committer) mailing list mailing
> > list archive at Nabble.com.
> > _______________________________________________
> > rules-dev mailing list
> > rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
> > https://lists.jboss.org/mailman/listinfo/rules-dev
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > rules-dev mailing list
> > rules-dev(a)lists.jboss.org
> > https://lists.jboss.org/mailman/listinfo/rules-dev
> >
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-dev
6:35 a.m.
Which projects do you have imported in Eclipse? Only the ones from the
Guvnor repository or all drools projects?
Kind Regards
Mikael
On Thu, Nov 3, 2011 at 12:08 PM, Jervis Liu <jliu(a)redhat.com> wrote:
I've spent a day on this. What I found is that I can run guvnor
from
Eclipse using the WAR configuration as Mike mentioned. Below is the
configuration that works:
Linux, Eclipse 3.6.2, Jdk 1.6.0_29, Google plugin for Eclipse 2.4.2 (the
latest version from the update site), GWT SDK 2.3.0.
The configuration does not work is:
Windows 7, Eclipse 3.6.2, Jdk 1.6.0_25, Google plugin for Eclipse 2.4.2,
GWT SDK 2.3.0.
I still have not figured out yet if this issue is a platform specific one.
Cheers,
Jervis
Mikael Lönneberg wrote:
> Beta4 is the version on my classpath, I also tried deploying the built
> WAR file on a standalone jboss as 7 server and that failed as well..
>
> /Mikael
>
> On Wed, Nov 2, 2011 at 5:21 PM, ge0ffrey <ge0ffrey.spam(a)gmail.com
> <mailto:ge0ffrey.spam@gmail.com>> wrote:
>
> Master should be on seam beta4, which fixed that logmanager thing
> from beta3
> Pls verify the seam version in your classpath
>
> --
> View this message in context:
>
http://drools.46999.n3.nabble.com/Problem-setting-up-Guvnor-to-run-in-hos...
> Sent from the Drools: Developer (committer) mailing list mailing
> list archive at Nabble.com.
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-dev
6:38 a.m.
Me...
droolsjbpm-ide-common
guvnor-repository
guvnor-repository-connector
guvnor-webapp
On 3 November 2011 11:35, Mikael Lönneberg <emil(a)snickeboa.com> wrote:
Which projects do you have imported in Eclipse? Only the ones from
the
Guvnor repository or all drools projects?
Kind Regards
Mikael
On Thu, Nov 3, 2011 at 12:08 PM, Jervis Liu <jliu(a)redhat.com> wrote:
> I've spent a day on this. What I found is that I can run guvnor from
> Eclipse using the WAR configuration as Mike mentioned. Below is the
> configuration that works:
>
> Linux, Eclipse 3.6.2, Jdk 1.6.0_29, Google plugin for Eclipse 2.4.2 (the
> latest version from the update site), GWT SDK 2.3.0.
>
> The configuration does not work is:
> Windows 7, Eclipse 3.6.2, Jdk 1.6.0_25, Google plugin for Eclipse 2.4.2,
> GWT SDK 2.3.0.
>
> I still have not figured out yet if this issue is a platform specific one.
>
> Cheers,
> Jervis
>
> Mikael Lönneberg wrote:
> > Beta4 is the version on my classpath, I also tried deploying the built
> > WAR file on a standalone jboss as 7 server and that failed as well..
> >
> > /Mikael
> >
> > On Wed, Nov 2, 2011 at 5:21 PM, ge0ffrey <ge0ffrey.spam(a)gmail.com
> > <mailto:ge0ffrey.spam@gmail.com>> wrote:
> >
> > Master should be on seam beta4, which fixed that logmanager thing
> > from beta3
> > Pls verify the seam version in your classpath
> >
> > --
> > View this message in context:
> >
>
http://drools.46999.n3.nabble.com/Problem-setting-up-Guvnor-to-run-in-hos...
> > Sent from the Drools: Developer (committer) mailing list mailing
> > list archive at Nabble.com.
> > _______________________________________________
> > rules-dev mailing list
> > rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
> > https://lists.jboss.org/mailman/listinfo/rules-dev
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > rules-dev mailing list
> > rules-dev(a)lists.jboss.org
> > https://lists.jboss.org/mailman/listinfo/rules-dev
> >
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-dev
2:32 a.m.
Finally I found the problem. It is a "classpath too long" on Windows.
Cheers,
Jervis
Michael Anstis wrote:
Me...
droolsjbpm-ide-common
guvnor-repository
guvnor-repository-connector
guvnor-webapp
On 3 November 2011 11:35, Mikael Lönneberg <emil(a)snickeboa.com
<mailto:emil@snickeboa.com>> wrote:
Which projects do you have imported in Eclipse? Only the ones from
the Guvnor repository or all drools projects?
Kind Regards
Mikael
On Thu, Nov 3, 2011 at 12:08 PM, Jervis Liu <jliu(a)redhat.com
<mailto:jliu@redhat.com>> wrote:
I've spent a day on this. What I found is that I can run
guvnor from
Eclipse using the WAR configuration as Mike mentioned. Below
is the
configuration that works:
Linux, Eclipse 3.6.2, Jdk 1.6.0_29, Google plugin for Eclipse
2.4.2 (the
latest version from the update site), GWT SDK 2.3.0.
The configuration does not work is:
Windows 7, Eclipse 3.6.2, Jdk 1.6.0_25, Google plugin for
Eclipse 2.4.2,
GWT SDK 2.3.0.
I still have not figured out yet if this issue is a platform
specific one.
Cheers,
Jervis
Mikael Lönneberg wrote:
> Beta4 is the version on my classpath, I also tried deploying
the built
> WAR file on a standalone jboss as 7 server and that failed
as well..
>
> /Mikael
>
> On Wed, Nov 2, 2011 at 5:21 PM, ge0ffrey
<ge0ffrey.spam(a)gmail.com <mailto:ge0ffrey.spam@gmail.com>
> <mailto:ge0ffrey.spam@gmail.com
<mailto:ge0ffrey.spam@gmail.com>>> wrote:
>
> Master should be on seam beta4, which fixed that
logmanager thing
> from beta3
> Pls verify the seam version in your classpath
>
> --
> View this message in context:
>
http://drools.46999.n3.nabble.com/Problem-setting-up-Guvnor-to-run-in-hos...
> Sent from the Drools: Developer (committer) mailing list
mailing
> list archive at Nabble.com.
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org
<mailto:rules-dev@lists.jboss.org>
<mailto:rules-dev@lists.jboss.org
<mailto:rules-dev@lists.jboss.org>>
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
>
>
------------------------------------------------------------------------
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/rules-dev
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/rules-dev
------------------------------------------------------------------------
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-dev
3:07 a.m.
Yay Jervis :)
Hopefully Mikael can confirm whether the issue was the same for him.
On 4 November 2011 07:32, Jervis Liu <jliu(a)redhat.com> wrote:
Finally I found the problem. It is a "classpath too long"
on Windows.
Cheers,
Jervis
Michael Anstis wrote:
> Me...
>
> droolsjbpm-ide-common
> guvnor-repository
> guvnor-repository-connector
> guvnor-webapp
>
>
> On 3 November 2011 11:35, Mikael Lönneberg <emil(a)snickeboa.com
> <mailto:emil@snickeboa.com>> wrote:
>
> Which projects do you have imported in Eclipse? Only the ones from
> the Guvnor repository or all drools projects?
>
> Kind Regards
>
> Mikael
>
> On Thu, Nov 3, 2011 at 12:08 PM, Jervis Liu <jliu(a)redhat.com
> <mailto:jliu@redhat.com>> wrote:
>
> I've spent a day on this. What I found is that I can run
> guvnor from
> Eclipse using the WAR configuration as Mike mentioned. Below
> is the
> configuration that works:
>
> Linux, Eclipse 3.6.2, Jdk 1.6.0_29, Google plugin for Eclipse
> 2.4.2 (the
> latest version from the update site), GWT SDK 2.3.0.
>
> The configuration does not work is:
> Windows 7, Eclipse 3.6.2, Jdk 1.6.0_25, Google plugin for
> Eclipse 2.4.2,
> GWT SDK 2.3.0.
>
> I still have not figured out yet if this issue is a platform
> specific one.
>
> Cheers,
> Jervis
>
> Mikael Lönneberg wrote:
> > Beta4 is the version on my classpath, I also tried deploying
> the built
> > WAR file on a standalone jboss as 7 server and that failed
> as well..
> >
> > /Mikael
> >
> > On Wed, Nov 2, 2011 at 5:21 PM, ge0ffrey
> <ge0ffrey.spam(a)gmail.com <mailto:ge0ffrey.spam@gmail.com>
> > <mailto:ge0ffrey.spam@gmail.com
> <mailto:ge0ffrey.spam@gmail.com>>> wrote:
> >
> > Master should be on seam beta4, which fixed that
> logmanager thing
> > from beta3
> > Pls verify the seam version in your classpath
> >
> > --
> > View this message in context:
> >
>
http://drools.46999.n3.nabble.com/Problem-setting-up-Guvnor-to-run-in-hos...
> > Sent from the Drools: Developer (committer) mailing list
> mailing
> > list archive at Nabble.com.
> > _______________________________________________
> > rules-dev mailing list
> > rules-dev(a)lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>
> <mailto:rules-dev@lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>>
> > https://lists.jboss.org/mailman/listinfo/rules-dev
> >
> >
> >
>
------------------------------------------------------------------------
> >
> > _______________________________________________
> > rules-dev mailing list
> > rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
> > https://lists.jboss.org/mailman/listinfo/rules-dev
> >
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
>
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-dev
3:30 a.m.
Well that doesn't explain it on my Linux installation unfortunately :(, as
I'm not aware of a limitation in classpath on linux. I tried running it
with Eclipse Indigo yesterday but got the same errors. Next step is trying
to set it up on a completely different machine.
How can I verify if this is the case?
/Mikael
On Fri, Nov 4, 2011 at 8:32 AM, Jervis Liu <jliu(a)redhat.com> wrote:
Finally I found the problem. It is a "classpath too long"
on Windows.
Cheers,
Jervis
Michael Anstis wrote:
> Me...
>
> droolsjbpm-ide-common
> guvnor-repository
> guvnor-repository-connector
> guvnor-webapp
>
>
> On 3 November 2011 11:35, Mikael Lönneberg <emil(a)snickeboa.com
> <mailto:emil@snickeboa.com>> wrote:
>
> Which projects do you have imported in Eclipse? Only the ones from
> the Guvnor repository or all drools projects?
>
> Kind Regards
>
> Mikael
>
> On Thu, Nov 3, 2011 at 12:08 PM, Jervis Liu <jliu(a)redhat.com
> <mailto:jliu@redhat.com>> wrote:
>
> I've spent a day on this. What I found is that I can run
> guvnor from
> Eclipse using the WAR configuration as Mike mentioned. Below
> is the
> configuration that works:
>
> Linux, Eclipse 3.6.2, Jdk 1.6.0_29, Google plugin for Eclipse
> 2.4.2 (the
> latest version from the update site), GWT SDK 2.3.0.
>
> The configuration does not work is:
> Windows 7, Eclipse 3.6.2, Jdk 1.6.0_25, Google plugin for
> Eclipse 2.4.2,
> GWT SDK 2.3.0.
>
> I still have not figured out yet if this issue is a platform
> specific one.
>
> Cheers,
> Jervis
>
> Mikael Lönneberg wrote:
> > Beta4 is the version on my classpath, I also tried deploying
> the built
> > WAR file on a standalone jboss as 7 server and that failed
> as well..
> >
> > /Mikael
> >
> > On Wed, Nov 2, 2011 at 5:21 PM, ge0ffrey
> <ge0ffrey.spam(a)gmail.com <mailto:ge0ffrey.spam@gmail.com>
> > <mailto:ge0ffrey.spam@gmail.com
> <mailto:ge0ffrey.spam@gmail.com>>> wrote:
> >
> > Master should be on seam beta4, which fixed that
> logmanager thing
> > from beta3
> > Pls verify the seam version in your classpath
> >
> > --
> > View this message in context:
> >
>
http://drools.46999.n3.nabble.com/Problem-setting-up-Guvnor-to-run-in-hos...
> > Sent from the Drools: Developer (committer) mailing list
> mailing
> > list archive at Nabble.com.
> > _______________________________________________
> > rules-dev mailing list
> > rules-dev(a)lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>
> <mailto:rules-dev@lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>>
> > https://lists.jboss.org/mailman/listinfo/rules-dev
> >
> >
> >
>
------------------------------------------------------------------------
> >
> > _______________________________________________
> > rules-dev mailing list
> > rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
> > https://lists.jboss.org/mailman/listinfo/rules-dev
> >
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
>
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-dev
3:51 a.m.
Mikael Lönneberg wrote:
Well that doesn't explain it on my Linux installation
unfortunately
:(, as I'm not aware of a limitation in classpath on linux. I tried
running it with Eclipse Indigo yesterday but got the same errors. Next
step is trying to set it up on a completely different machine.
How can I verify if this is the case?
Have you tried running Guvnor with War option? Google -> Web Toolkit
Settings -> Web Application, Check the checkbox "This project has WAR
directory", then set WAR directory to
"target/guvnor-webapp-5.4.0-SNAPSHOT", also check the checkbox "lunch
and deploy from this directory"
/Mikael
On Fri, Nov 4, 2011 at 8:32 AM, Jervis Liu <jliu(a)redhat.com
<mailto:jliu@redhat.com>> wrote:
Finally I found the problem. It is a "classpath too long" on Windows.
Cheers,
Jervis
Michael Anstis wrote:
> Me...
>
> droolsjbpm-ide-common
> guvnor-repository
> guvnor-repository-connector
> guvnor-webapp
>
>
> On 3 November 2011 11:35, Mikael Lönneberg <emil(a)snickeboa.com
<mailto:emil@snickeboa.com>
> <mailto:emil@snickeboa.com <mailto:emil@snickeboa.com>>> wrote:
>
> Which projects do you have imported in Eclipse? Only the
ones from
> the Guvnor repository or all drools projects?
>
> Kind Regards
>
> Mikael
>
> On Thu, Nov 3, 2011 at 12:08 PM, Jervis Liu <jliu(a)redhat.com
<mailto:jliu@redhat.com>
> <mailto:jliu@redhat.com <mailto:jliu@redhat.com>>> wrote:
>
> I've spent a day on this. What I found is that I can run
> guvnor from
> Eclipse using the WAR configuration as Mike mentioned. Below
> is the
> configuration that works:
>
> Linux, Eclipse 3.6.2, Jdk 1.6.0_29, Google plugin for
Eclipse
> 2.4.2 (the
> latest version from the update site), GWT SDK 2.3.0.
>
> The configuration does not work is:
> Windows 7, Eclipse 3.6.2, Jdk 1.6.0_25, Google plugin for
> Eclipse 2.4.2,
> GWT SDK 2.3.0.
>
> I still have not figured out yet if this issue is a platform
> specific one.
>
> Cheers,
> Jervis
>
> Mikael Lönneberg wrote:
> > Beta4 is the version on my classpath, I also tried
deploying
> the built
> > WAR file on a standalone jboss as 7 server and that failed
> as well..
> >
> > /Mikael
> >
> > On Wed, Nov 2, 2011 at 5:21 PM, ge0ffrey
> <ge0ffrey.spam(a)gmail.com
<mailto:ge0ffrey.spam@gmail.com> <mailto:ge0ffrey.spam@gmail.com
<mailto:ge0ffrey.spam@gmail.com>>
> > <mailto:ge0ffrey.spam@gmail.com
<mailto:ge0ffrey.spam@gmail.com>
> <mailto:ge0ffrey.spam@gmail.com
<mailto:ge0ffrey.spam@gmail.com>>>> wrote:
> >
> > Master should be on seam beta4, which fixed that
> logmanager thing
> > from beta3
> > Pls verify the seam version in your classpath
> >
> > --
> > View this message in context:
> >
>
http://drools.46999.n3.nabble.com/Problem-setting-up-Guvnor-to-run-in-hos...
> > Sent from the Drools: Developer (committer)
mailing list
> mailing
> > list archive at Nabble.com.
> > _______________________________________________
> > rules-dev mailing list
> > rules-dev(a)lists.jboss.org
<mailto:rules-dev@lists.jboss.org>
> <mailto:rules-dev@lists.jboss.org
<mailto:rules-dev@lists.jboss.org>>
> <mailto:rules-dev@lists.jboss.org
<mailto:rules-dev@lists.jboss.org>
> <mailto:rules-dev@lists.jboss.org
<mailto:rules-dev@lists.jboss.org>>>
> > https://lists.jboss.org/mailman/listinfo/rules-dev
> >
> >
> >
>
------------------------------------------------------------------------
> >
> > _______________________________________________
> > rules-dev mailing list
> > rules-dev(a)lists.jboss.org
<mailto:rules-dev@lists.jboss.org>
<mailto:rules-dev@lists.jboss.org <mailto:rules-dev@lists.jboss.org>>
> > https://lists.jboss.org/mailman/listinfo/rules-dev
> >
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org
<mailto:rules-dev@lists.jboss.org>
<mailto:rules-dev@lists.jboss.org <mailto:rules-dev@lists.jboss.org>>
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
>
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
<mailto:rules-dev@lists.jboss.org <mailto:rules-dev@lists.jboss.org>>
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
>
>
------------------------------------------------------------------------
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/rules-dev
------------------------------------------------------------------------
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-dev
4:24 a.m.
I did try with "This project has WAR directory" however I'm not sure if I
used the "Launch and deploy.. " option. I will have to check that when I
get home. But just using the WAR directory didn't work.
/Mikael
On Fri, Nov 4, 2011 at 9:51 AM, Jervis Liu <jliu(a)redhat.com> wrote:
Mikael Lönneberg wrote:
> Well that doesn't explain it on my Linux installation unfortunately
> :(, as I'm not aware of a limitation in classpath on linux. I tried
> running it with Eclipse Indigo yesterday but got the same errors. Next
> step is trying to set it up on a completely different machine.
> How can I verify if this is the case?
>
Have you tried running Guvnor with War option? Google -> Web Toolkit
Settings -> Web Application, Check the checkbox "This project has WAR
directory", then set WAR directory to
"target/guvnor-webapp-5.4.0-SNAPSHOT", also check the checkbox "lunch
and deploy from this directory"
> /Mikael
>
> On Fri, Nov 4, 2011 at 8:32 AM, Jervis Liu <jliu(a)redhat.com
> <mailto:jliu@redhat.com>> wrote:
>
> Finally I found the problem. It is a "classpath too long" on Windows.
>
> Cheers,
> Jervis
>
> Michael Anstis wrote:
> > Me...
> >
> > droolsjbpm-ide-common
> > guvnor-repository
> > guvnor-repository-connector
> > guvnor-webapp
> >
> >
> > On 3 November 2011 11:35, Mikael Lönneberg <emil(a)snickeboa.com
> <mailto:emil@snickeboa.com>
> > <mailto:emil@snickeboa.com <mailto:emil@snickeboa.com>>>
wrote:
> >
> > Which projects do you have imported in Eclipse? Only the
> ones from
> > the Guvnor repository or all drools projects?
> >
> > Kind Regards
> >
> > Mikael
> >
> > On Thu, Nov 3, 2011 at 12:08 PM, Jervis Liu <jliu(a)redhat.com
> <mailto:jliu@redhat.com>
> > <mailto:jliu@redhat.com <mailto:jliu@redhat.com>>>
wrote:
> >
> > I've spent a day on this. What I found is that I can run
> > guvnor from
> > Eclipse using the WAR configuration as Mike mentioned.
Below
> > is the
> > configuration that works:
> >
> > Linux, Eclipse 3.6.2, Jdk 1.6.0_29, Google plugin for
> Eclipse
> > 2.4.2 (the
> > latest version from the update site), GWT SDK 2.3.0.
> >
> > The configuration does not work is:
> > Windows 7, Eclipse 3.6.2, Jdk 1.6.0_25, Google plugin for
> > Eclipse 2.4.2,
> > GWT SDK 2.3.0.
> >
> > I still have not figured out yet if this issue is a
platform
> > specific one.
> >
> > Cheers,
> > Jervis
> >
> > Mikael Lönneberg wrote:
> > > Beta4 is the version on my classpath, I also tried
> deploying
> > the built
> > > WAR file on a standalone jboss as 7 server and that
failed
> > as well..
> > >
> > > /Mikael
> > >
> > > On Wed, Nov 2, 2011 at 5:21 PM, ge0ffrey
> > <ge0ffrey.spam(a)gmail.com
> <mailto:ge0ffrey.spam@gmail.com> <mailto:ge0ffrey.spam@gmail.com
> <mailto:ge0ffrey.spam@gmail.com>>
> > > <mailto:ge0ffrey.spam@gmail.com
> <mailto:ge0ffrey.spam@gmail.com>
> > <mailto:ge0ffrey.spam@gmail.com
> <mailto:ge0ffrey.spam@gmail.com>>>> wrote:
> > >
> > > Master should be on seam beta4, which fixed that
> > logmanager thing
> > > from beta3
> > > Pls verify the seam version in your classpath
> > >
> > > --
> > > View this message in context:
> > >
> >
>
http://drools.46999.n3.nabble.com/Problem-setting-up-Guvnor-to-run-in-hos...
> > > Sent from the Drools: Developer (committer)
> mailing list
> > mailing
> > > list archive at Nabble.com.
> > > _______________________________________________
> > > rules-dev mailing list
> > > rules-dev(a)lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>
> > <mailto:rules-dev@lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>>
> > <mailto:rules-dev@lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>
> > <mailto:rules-dev@lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>>>
> > > https://lists.jboss.org/mailman/listinfo/rules-dev
> > >
> > >
> > >
> >
>
------------------------------------------------------------------------
> > >
> > > _______________________________________________
> > > rules-dev mailing list
> > > rules-dev(a)lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>
> <mailto:rules-dev@lists.jboss.org <mailto:rules-dev@lists.jboss.org
>>
> > > https://lists.jboss.org/mailman/listinfo/rules-dev
> > >
> >
> > _______________________________________________
> > rules-dev mailing list
> > rules-dev(a)lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>
> <mailto:rules-dev@lists.jboss.org <mailto:rules-dev@lists.jboss.org
>>
> > https://lists.jboss.org/mailman/listinfo/rules-dev
> >
> >
> >
> > _______________________________________________
> > rules-dev mailing list
> > rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
> <mailto:rules-dev@lists.jboss.org <mailto:rules-dev@lists.jboss.org
>>
> > https://lists.jboss.org/mailman/listinfo/rules-dev
> >
> >
> >
>
------------------------------------------------------------------------
> >
> > _______________________________________________
> > rules-dev mailing list
> > rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
> > https://lists.jboss.org/mailman/listinfo/rules-dev
> >
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-dev
3:17 p.m.
Yeah! Success. It was the devious elusive "launch and deploy from this
directory" checkbox that did the trick.
/Mikael
On Fri, Nov 4, 2011 at 10:24 AM, Mikael Lönneberg <emil(a)snickeboa.com>wrote:
I did try with "This project has WAR directory" however
I'm not sure if I
used the "Launch and deploy.. " option. I will have to check that when I
get home. But just using the WAR directory didn't work.
/Mikael
On Fri, Nov 4, 2011 at 9:51 AM, Jervis Liu <jliu(a)redhat.com> wrote:
> Mikael Lönneberg wrote:
> > Well that doesn't explain it on my Linux installation unfortunately
> > :(, as I'm not aware of a limitation in classpath on linux. I tried
> > running it with Eclipse Indigo yesterday but got the same errors. Next
> > step is trying to set it up on a completely different machine.
> > How can I verify if this is the case?
> >
> Have you tried running Guvnor with War option? Google -> Web Toolkit
> Settings -> Web Application, Check the checkbox "This project has WAR
> directory", then set WAR directory to
> "target/guvnor-webapp-5.4.0-SNAPSHOT", also check the checkbox "lunch
> and deploy from this directory"
>
>
> > /Mikael
> >
> > On Fri, Nov 4, 2011 at 8:32 AM, Jervis Liu <jliu(a)redhat.com
> > <mailto:jliu@redhat.com>> wrote:
> >
> > Finally I found the problem. It is a "classpath too long" on
> Windows.
> >
> > Cheers,
> > Jervis
> >
> > Michael Anstis wrote:
> > > Me...
> > >
> > > droolsjbpm-ide-common
> > > guvnor-repository
> > > guvnor-repository-connector
> > > guvnor-webapp
> > >
> > >
> > > On 3 November 2011 11:35, Mikael Lönneberg <emil(a)snickeboa.com
> > <mailto:emil@snickeboa.com>
> > > <mailto:emil@snickeboa.com <mailto:emil@snickeboa.com>>>
wrote:
> > >
> > > Which projects do you have imported in Eclipse? Only the
> > ones from
> > > the Guvnor repository or all drools projects?
> > >
> > > Kind Regards
> > >
> > > Mikael
> > >
> > > On Thu, Nov 3, 2011 at 12:08 PM, Jervis Liu <jliu(a)redhat.com
> > <mailto:jliu@redhat.com>
> > > <mailto:jliu@redhat.com <mailto:jliu@redhat.com>>>
wrote:
> > >
> > > I've spent a day on this. What I found is that I can run
> > > guvnor from
> > > Eclipse using the WAR configuration as Mike mentioned.
> Below
> > > is the
> > > configuration that works:
> > >
> > > Linux, Eclipse 3.6.2, Jdk 1.6.0_29, Google plugin for
> > Eclipse
> > > 2.4.2 (the
> > > latest version from the update site), GWT SDK 2.3.0.
> > >
> > > The configuration does not work is:
> > > Windows 7, Eclipse 3.6.2, Jdk 1.6.0_25, Google plugin for
> > > Eclipse 2.4.2,
> > > GWT SDK 2.3.0.
> > >
> > > I still have not figured out yet if this issue is a
> platform
> > > specific one.
> > >
> > > Cheers,
> > > Jervis
> > >
> > > Mikael Lönneberg wrote:
> > > > Beta4 is the version on my classpath, I also tried
> > deploying
> > > the built
> > > > WAR file on a standalone jboss as 7 server and that
> failed
> > > as well..
> > > >
> > > > /Mikael
> > > >
> > > > On Wed, Nov 2, 2011 at 5:21 PM, ge0ffrey
> > > <ge0ffrey.spam(a)gmail.com
> > <mailto:ge0ffrey.spam@gmail.com> <mailto:ge0ffrey.spam@gmail.com
> > <mailto:ge0ffrey.spam@gmail.com>>
> > > > <mailto:ge0ffrey.spam@gmail.com
> > <mailto:ge0ffrey.spam@gmail.com>
> > > <mailto:ge0ffrey.spam@gmail.com
> > <mailto:ge0ffrey.spam@gmail.com>>>> wrote:
> > > >
> > > > Master should be on seam beta4, which fixed that
> > > logmanager thing
> > > > from beta3
> > > > Pls verify the seam version in your classpath
> > > >
> > > > --
> > > > View this message in context:
> > > >
> > >
> >
>
http://drools.46999.n3.nabble.com/Problem-setting-up-Guvnor-to-run-in-hos...
> > > > Sent from the Drools: Developer (committer)
> > mailing list
> > > mailing
> > > > list archive at Nabble.com.
> > > > _______________________________________________
> > > > rules-dev mailing list
> > > > rules-dev(a)lists.jboss.org
> > <mailto:rules-dev@lists.jboss.org>
> > > <mailto:rules-dev@lists.jboss.org
> > <mailto:rules-dev@lists.jboss.org>>
> > > <mailto:rules-dev@lists.jboss.org
> > <mailto:rules-dev@lists.jboss.org>
> > > <mailto:rules-dev@lists.jboss.org
> > <mailto:rules-dev@lists.jboss.org>>>
> > > > https://lists.jboss.org/mailman/listinfo/rules-dev
> > > >
> > > >
> > > >
> > >
> >
> ------------------------------------------------------------------------
> > > >
> > > > _______________________________________________
> > > > rules-dev mailing list
> > > > rules-dev(a)lists.jboss.org
> > <mailto:rules-dev@lists.jboss.org>
> > <mailto:rules-dev@lists.jboss.org <mailto:rules-dev@lists.jboss.org
> >>
> > > > https://lists.jboss.org/mailman/listinfo/rules-dev
> > > >
> > >
> > > _______________________________________________
> > > rules-dev mailing list
> > > rules-dev(a)lists.jboss.org
> > <mailto:rules-dev@lists.jboss.org>
> > <mailto:rules-dev@lists.jboss.org <mailto:rules-dev@lists.jboss.org
> >>
> > > https://lists.jboss.org/mailman/listinfo/rules-dev
> > >
> > >
> > >
> > > _______________________________________________
> > > rules-dev mailing list
> > > rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
> > <mailto:rules-dev@lists.jboss.org <mailto:rules-dev@lists.jboss.org
> >>
> > > https://lists.jboss.org/mailman/listinfo/rules-dev
> > >
> > >
> > >
> >
> ------------------------------------------------------------------------
> > >
> > > _______________________________________________
> > > rules-dev mailing list
> > > rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
> > > https://lists.jboss.org/mailman/listinfo/rules-dev
> > >
> >
> > _______________________________________________
> > rules-dev mailing list
> > rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
> > https://lists.jboss.org/mailman/listinfo/rules-dev
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > rules-dev mailing list
> > rules-dev(a)lists.jboss.org
> > https://lists.jboss.org/mailman/listinfo/rules-dev
> >
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
3:29 p.m.
Yay. Let me be the first to congratulate you :)
On 4 November 2011 20:17, Mikael Lönneberg <emil(a)snickeboa.com> wrote:
Yeah! Success. It was the devious elusive "launch and deploy
from this
directory" checkbox that did the trick.
/Mikael
On Fri, Nov 4, 2011 at 10:24 AM, Mikael Lönneberg <emil(a)snickeboa.com>wrote:
> I did try with "This project has WAR directory" however I'm not sure if
I
> used the "Launch and deploy.. " option. I will have to check that when I
> get home. But just using the WAR directory didn't work.
>
> /Mikael
>
>
> On Fri, Nov 4, 2011 at 9:51 AM, Jervis Liu <jliu(a)redhat.com> wrote:
>
>> Mikael Lönneberg wrote:
>> > Well that doesn't explain it on my Linux installation unfortunately
>> > :(, as I'm not aware of a limitation in classpath on linux. I tried
>> > running it with Eclipse Indigo yesterday but got the same errors. Next
>> > step is trying to set it up on a completely different machine.
>> > How can I verify if this is the case?
>> >
>> Have you tried running Guvnor with War option? Google -> Web Toolkit
>> Settings -> Web Application, Check the checkbox "This project has WAR
>> directory", then set WAR directory to
>> "target/guvnor-webapp-5.4.0-SNAPSHOT", also check the checkbox
"lunch
>> and deploy from this directory"
>>
>>
>> > /Mikael
>> >
>> > On Fri, Nov 4, 2011 at 8:32 AM, Jervis Liu <jliu(a)redhat.com
>> > <mailto:jliu@redhat.com>> wrote:
>> >
>> > Finally I found the problem. It is a "classpath too long" on
>> Windows.
>> >
>> > Cheers,
>> > Jervis
>> >
>> > Michael Anstis wrote:
>> > > Me...
>> > >
>> > > droolsjbpm-ide-common
>> > > guvnor-repository
>> > > guvnor-repository-connector
>> > > guvnor-webapp
>> > >
>> > >
>> > > On 3 November 2011 11:35, Mikael Lönneberg <emil(a)snickeboa.com
>> > <mailto:emil@snickeboa.com>
>> > > <mailto:emil@snickeboa.com
<mailto:emil@snickeboa.com>>> wrote:
>> > >
>> > > Which projects do you have imported in Eclipse? Only the
>> > ones from
>> > > the Guvnor repository or all drools projects?
>> > >
>> > > Kind Regards
>> > >
>> > > Mikael
>> > >
>> > > On Thu, Nov 3, 2011 at 12:08 PM, Jervis Liu
<jliu(a)redhat.com
>> > <mailto:jliu@redhat.com>
>> > > <mailto:jliu@redhat.com
<mailto:jliu@redhat.com>>> wrote:
>> > >
>> > > I've spent a day on this. What I found is that I can
run
>> > > guvnor from
>> > > Eclipse using the WAR configuration as Mike mentioned.
>> Below
>> > > is the
>> > > configuration that works:
>> > >
>> > > Linux, Eclipse 3.6.2, Jdk 1.6.0_29, Google plugin for
>> > Eclipse
>> > > 2.4.2 (the
>> > > latest version from the update site), GWT SDK 2.3.0.
>> > >
>> > > The configuration does not work is:
>> > > Windows 7, Eclipse 3.6.2, Jdk 1.6.0_25, Google plugin for
>> > > Eclipse 2.4.2,
>> > > GWT SDK 2.3.0.
>> > >
>> > > I still have not figured out yet if this issue is a
>> platform
>> > > specific one.
>> > >
>> > > Cheers,
>> > > Jervis
>> > >
>> > > Mikael Lönneberg wrote:
>> > > > Beta4 is the version on my classpath, I also tried
>> > deploying
>> > > the built
>> > > > WAR file on a standalone jboss as 7 server and that
>> failed
>> > > as well..
>> > > >
>> > > > /Mikael
>> > > >
>> > > > On Wed, Nov 2, 2011 at 5:21 PM, ge0ffrey
>> > > <ge0ffrey.spam(a)gmail.com
>> > <mailto:ge0ffrey.spam@gmail.com>
<mailto:ge0ffrey.spam@gmail.com
>> > <mailto:ge0ffrey.spam@gmail.com>>
>> > > > <mailto:ge0ffrey.spam@gmail.com
>> > <mailto:ge0ffrey.spam@gmail.com>
>> > > <mailto:ge0ffrey.spam@gmail.com
>> > <mailto:ge0ffrey.spam@gmail.com>>>> wrote:
>> > > >
>> > > > Master should be on seam beta4, which fixed that
>> > > logmanager thing
>> > > > from beta3
>> > > > Pls verify the seam version in your classpath
>> > > >
>> > > > --
>> > > > View this message in context:
>> > > >
>> > >
>> >
>>
http://drools.46999.n3.nabble.com/Problem-setting-up-Guvnor-to-run-in-hos...
>> > > > Sent from the Drools: Developer (committer)
>> > mailing list
>> > > mailing
>> > > > list archive at Nabble.com.
>> > > > _______________________________________________
>> > > > rules-dev mailing list
>> > > > rules-dev(a)lists.jboss.org
>> > <mailto:rules-dev@lists.jboss.org>
>> > > <mailto:rules-dev@lists.jboss.org
>> > <mailto:rules-dev@lists.jboss.org>>
>> > > <mailto:rules-dev@lists.jboss.org
>> > <mailto:rules-dev@lists.jboss.org>
>> > > <mailto:rules-dev@lists.jboss.org
>> > <mailto:rules-dev@lists.jboss.org>>>
>> > > >
https://lists.jboss.org/mailman/listinfo/rules-dev
>> > > >
>> > > >
>> > > >
>> > >
>> >
>> ------------------------------------------------------------------------
>> > > >
>> > > > _______________________________________________
>> > > > rules-dev mailing list
>> > > > rules-dev(a)lists.jboss.org
>> > <mailto:rules-dev@lists.jboss.org>
>> > <mailto:rules-dev@lists.jboss.org <mailto:
>> rules-dev(a)lists.jboss.org>>
>> > > > https://lists.jboss.org/mailman/listinfo/rules-dev
>> > > >
>> > >
>> > > _______________________________________________
>> > > rules-dev mailing list
>> > > rules-dev(a)lists.jboss.org
>> > <mailto:rules-dev@lists.jboss.org>
>> > <mailto:rules-dev@lists.jboss.org <mailto:
>> rules-dev(a)lists.jboss.org>>
>> > > https://lists.jboss.org/mailman/listinfo/rules-dev
>> > >
>> > >
>> > >
>> > > _______________________________________________
>> > > rules-dev mailing list
>> > > rules-dev(a)lists.jboss.org
<mailto:rules-dev@lists.jboss.org>
>> > <mailto:rules-dev@lists.jboss.org <mailto:
>> rules-dev(a)lists.jboss.org>>
>> > > https://lists.jboss.org/mailman/listinfo/rules-dev
>> > >
>> > >
>> > >
>> >
>> ------------------------------------------------------------------------
>> > >
>> > > _______________________________________________
>> > > rules-dev mailing list
>> > > rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
>> > > https://lists.jboss.org/mailman/listinfo/rules-dev
>> > >
>> >
>> > _______________________________________________
>> > rules-dev mailing list
>> > rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
>> > https://lists.jboss.org/mailman/listinfo/rules-dev
>> >
>> >
>> >
>> ------------------------------------------------------------------------
>> >
>> > _______________________________________________
>> > rules-dev mailing list
>> > rules-dev(a)lists.jboss.org
>> > https://lists.jboss.org/mailman/listinfo/rules-dev
>> >
>>
>> _______________________________________________
>> rules-dev mailing list
>> rules-dev(a)lists.jboss.org
>> https://lists.jboss.org/mailman/listinfo/rules-dev
>>
>
>
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-dev
3:31 p.m.
Funny thing is, on checking, the "launch and deploy from this directory"
checkbox is not ticked for me!
On 4 November 2011 20:29, Michael Anstis <michael.anstis(a)gmail.com> wrote:
Yay. Let me be the first to congratulate you :)
On 4 November 2011 20:17, Mikael Lönneberg <emil(a)snickeboa.com> wrote:
> Yeah! Success. It was the devious elusive "launch and deploy from this
> directory" checkbox that did the trick.
>
> /Mikael
>
>
> On Fri, Nov 4, 2011 at 10:24 AM, Mikael Lönneberg <emil(a)snickeboa.com>wrote:
>
>> I did try with "This project has WAR directory" however I'm not
sure if
>> I used the "Launch and deploy.. " option. I will have to check that
when I
>> get home. But just using the WAR directory didn't work.
>>
>> /Mikael
>>
>>
>> On Fri, Nov 4, 2011 at 9:51 AM, Jervis Liu <jliu(a)redhat.com> wrote:
>>
>>> Mikael Lönneberg wrote:
>>> > Well that doesn't explain it on my Linux installation unfortunately
>>> > :(, as I'm not aware of a limitation in classpath on linux. I tried
>>> > running it with Eclipse Indigo yesterday but got the same errors. Next
>>> > step is trying to set it up on a completely different machine.
>>> > How can I verify if this is the case?
>>> >
>>> Have you tried running Guvnor with War option? Google -> Web Toolkit
>>> Settings -> Web Application, Check the checkbox "This project has
WAR
>>> directory", then set WAR directory to
>>> "target/guvnor-webapp-5.4.0-SNAPSHOT", also check the checkbox
"lunch
>>> and deploy from this directory"
>>>
>>>
>>> > /Mikael
>>> >
>>> > On Fri, Nov 4, 2011 at 8:32 AM, Jervis Liu <jliu(a)redhat.com
>>> > <mailto:jliu@redhat.com>> wrote:
>>> >
>>> > Finally I found the problem. It is a "classpath too long"
on
>>> Windows.
>>> >
>>> > Cheers,
>>> > Jervis
>>> >
>>> > Michael Anstis wrote:
>>> > > Me...
>>> > >
>>> > > droolsjbpm-ide-common
>>> > > guvnor-repository
>>> > > guvnor-repository-connector
>>> > > guvnor-webapp
>>> > >
>>> > >
>>> > > On 3 November 2011 11:35, Mikael Lönneberg
<emil(a)snickeboa.com
>>> > <mailto:emil@snickeboa.com>
>>> > > <mailto:emil@snickeboa.com
<mailto:emil@snickeboa.com>>> wrote:
>>> > >
>>> > > Which projects do you have imported in Eclipse? Only the
>>> > ones from
>>> > > the Guvnor repository or all drools projects?
>>> > >
>>> > > Kind Regards
>>> > >
>>> > > Mikael
>>> > >
>>> > > On Thu, Nov 3, 2011 at 12:08 PM, Jervis Liu <
>>> jliu(a)redhat.com
>>> > <mailto:jliu@redhat.com>
>>> > > <mailto:jliu@redhat.com
<mailto:jliu@redhat.com>>> wrote:
>>> > >
>>> > > I've spent a day on this. What I found is that I
can run
>>> > > guvnor from
>>> > > Eclipse using the WAR configuration as Mike mentioned.
>>> Below
>>> > > is the
>>> > > configuration that works:
>>> > >
>>> > > Linux, Eclipse 3.6.2, Jdk 1.6.0_29, Google plugin for
>>> > Eclipse
>>> > > 2.4.2 (the
>>> > > latest version from the update site), GWT SDK 2.3.0.
>>> > >
>>> > > The configuration does not work is:
>>> > > Windows 7, Eclipse 3.6.2, Jdk 1.6.0_25, Google plugin
>>> for
>>> > > Eclipse 2.4.2,
>>> > > GWT SDK 2.3.0.
>>> > >
>>> > > I still have not figured out yet if this issue is a
>>> platform
>>> > > specific one.
>>> > >
>>> > > Cheers,
>>> > > Jervis
>>> > >
>>> > > Mikael Lönneberg wrote:
>>> > > > Beta4 is the version on my classpath, I also
tried
>>> > deploying
>>> > > the built
>>> > > > WAR file on a standalone jboss as 7 server and
that
>>> failed
>>> > > as well..
>>> > > >
>>> > > > /Mikael
>>> > > >
>>> > > > On Wed, Nov 2, 2011 at 5:21 PM, ge0ffrey
>>> > > <ge0ffrey.spam(a)gmail.com
>>> > <mailto:ge0ffrey.spam@gmail.com>
<mailto:ge0ffrey.spam@gmail.com
>>> > <mailto:ge0ffrey.spam@gmail.com>>
>>> > > > <mailto:ge0ffrey.spam@gmail.com
>>> > <mailto:ge0ffrey.spam@gmail.com>
>>> > > <mailto:ge0ffrey.spam@gmail.com
>>> > <mailto:ge0ffrey.spam@gmail.com>>>> wrote:
>>> > > >
>>> > > > Master should be on seam beta4, which fixed
that
>>> > > logmanager thing
>>> > > > from beta3
>>> > > > Pls verify the seam version in your classpath
>>> > > >
>>> > > > --
>>> > > > View this message in context:
>>> > > >
>>> > >
>>> >
>>>
http://drools.46999.n3.nabble.com/Problem-setting-up-Guvnor-to-run-in-hos...
>>> > > > Sent from the Drools: Developer (committer)
>>> > mailing list
>>> > > mailing
>>> > > > list archive at Nabble.com.
>>> > > >
_______________________________________________
>>> > > > rules-dev mailing list
>>> > > > rules-dev(a)lists.jboss.org
>>> > <mailto:rules-dev@lists.jboss.org>
>>> > > <mailto:rules-dev@lists.jboss.org
>>> > <mailto:rules-dev@lists.jboss.org>>
>>> > > <mailto:rules-dev@lists.jboss.org
>>> > <mailto:rules-dev@lists.jboss.org>
>>> > > <mailto:rules-dev@lists.jboss.org
>>> > <mailto:rules-dev@lists.jboss.org>>>
>>> > > >
>>> https://lists.jboss.org/mailman/listinfo/rules-dev
>>> > > >
>>> > > >
>>> > > >
>>> > >
>>> >
>>> ------------------------------------------------------------------------
>>> > > >
>>> > > > _______________________________________________
>>> > > > rules-dev mailing list
>>> > > > rules-dev(a)lists.jboss.org
>>> > <mailto:rules-dev@lists.jboss.org>
>>> > <mailto:rules-dev@lists.jboss.org <mailto:
>>> rules-dev(a)lists.jboss.org>>
>>> > > >
https://lists.jboss.org/mailman/listinfo/rules-dev
>>> > > >
>>> > >
>>> > > _______________________________________________
>>> > > rules-dev mailing list
>>> > > rules-dev(a)lists.jboss.org
>>> > <mailto:rules-dev@lists.jboss.org>
>>> > <mailto:rules-dev@lists.jboss.org <mailto:
>>> rules-dev(a)lists.jboss.org>>
>>> > > https://lists.jboss.org/mailman/listinfo/rules-dev
>>> > >
>>> > >
>>> > >
>>> > > _______________________________________________
>>> > > rules-dev mailing list
>>> > > rules-dev(a)lists.jboss.org
<mailto:rules-dev@lists.jboss.org
>>> >
>>> > <mailto:rules-dev@lists.jboss.org <mailto:
>>> rules-dev(a)lists.jboss.org>>
>>> > > https://lists.jboss.org/mailman/listinfo/rules-dev
>>> > >
>>> > >
>>> > >
>>> >
>>> ------------------------------------------------------------------------
>>> > >
>>> > > _______________________________________________
>>> > > rules-dev mailing list
>>> > > rules-dev(a)lists.jboss.org
<mailto:rules-dev@lists.jboss.org>
>>> > > https://lists.jboss.org/mailman/listinfo/rules-dev
>>> > >
>>> >
>>> > _______________________________________________
>>> > rules-dev mailing list
>>> > rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
>>> > https://lists.jboss.org/mailman/listinfo/rules-dev
>>> >
>>> >
>>> >
>>> ------------------------------------------------------------------------
>>> >
>>> > _______________________________________________
>>> > rules-dev mailing list
>>> > rules-dev(a)lists.jboss.org
>>> > https://lists.jboss.org/mailman/listinfo/rules-dev
>>> >
>>>
>>> _______________________________________________
>>> rules-dev mailing list
>>> rules-dev(a)lists.jboss.org
>>> https://lists.jboss.org/mailman/listinfo/rules-dev
>>>
>>
>>
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
>
3:59 a.m.
Can an Eclipse user adjust the README.md in droolsjbpm-build-bootstrap
to include this trick for the gwt configuration?
Op 04-11-11 21:31, Michael Anstis schreef:
Funny thing is, on checking, the "launch and deploy from this
directory" checkbox is not ticked for me!
On 4 November 2011 20:29, Michael Anstis <michael.anstis(a)gmail.com
<mailto:michael.anstis@gmail.com>> wrote:
Yay. Let me be the first to congratulate you :)
On 4 November 2011 20:17, Mikael Lönneberg <emil(a)snickeboa.com
<mailto:emil@snickeboa.com>> wrote:
Yeah! Success. It was the devious elusive "launch and deploy
from this directory" checkbox that did the trick.
/Mikael
On Fri, Nov 4, 2011 at 10:24 AM, Mikael Lönneberg
<emil(a)snickeboa.com <mailto:emil@snickeboa.com>> wrote:
I did try with "This project has WAR directory" however
I'm not sure if I used the "Launch and deploy.. " option.
I will have to check that when I get home. But just using
the WAR directory didn't work.
/Mikael
On Fri, Nov 4, 2011 at 9:51 AM, Jervis Liu
<jliu(a)redhat.com <mailto:jliu@redhat.com>> wrote:
Mikael Lönneberg wrote:
> Well that doesn't explain it on my Linux
installation unfortunately
> :(, as I'm not aware of a limitation in classpath on
linux. I tried
> running it with Eclipse Indigo yesterday but got the
same errors. Next
> step is trying to set it up on a completely
different machine.
> How can I verify if this is the case?
>
Have you tried running Guvnor with War option? Google
-> Web Toolkit
Settings -> Web Application, Check the checkbox "This
project has WAR
directory", then set WAR directory to
"target/guvnor-webapp-5.4.0-SNAPSHOT", also check the
checkbox "lunch
and deploy from this directory"
> /Mikael
>
> On Fri, Nov 4, 2011 at 8:32 AM, Jervis Liu
<jliu(a)redhat.com <mailto:jliu@redhat.com>
> <mailto:jliu@redhat.com <mailto:jliu@redhat.com>>>
wrote:
>
> Finally I found the problem. It is a "classpath
too long" on Windows.
>
> Cheers,
> Jervis
>
> Michael Anstis wrote:
> > Me...
> >
> > droolsjbpm-ide-common
> > guvnor-repository
> > guvnor-repository-connector
> > guvnor-webapp
> >
> >
> > On 3 November 2011 11:35, Mikael Lönneberg
<emil(a)snickeboa.com <mailto:emil@snickeboa.com>
> <mailto:emil@snickeboa.com <mailto:emil@snickeboa.com>>
> > <mailto:emil@snickeboa.com
<mailto:emil@snickeboa.com> <mailto:emil@snickeboa.com
<mailto:emil@snickeboa.com>>>> wrote:
> >
> > Which projects do you have imported in
Eclipse? Only the
> ones from
> > the Guvnor repository or all drools projects?
> >
> > Kind Regards
> >
> > Mikael
> >
> > On Thu, Nov 3, 2011 at 12:08 PM, Jervis Liu
<jliu(a)redhat.com <mailto:jliu@redhat.com>
> <mailto:jliu@redhat.com <mailto:jliu@redhat.com>>
> > <mailto:jliu@redhat.com <mailto:jliu@redhat.com>
<mailto:jliu@redhat.com <mailto:jliu@redhat.com>>>>
wrote:
> >
> > I've spent a day on this. What I found is
that I can run
> > guvnor from
> > Eclipse using the WAR configuration as
Mike mentioned. Below
> > is the
> > configuration that works:
> >
> > Linux, Eclipse 3.6.2, Jdk 1.6.0_29, Google
plugin for
> Eclipse
> > 2.4.2 (the
> > latest version from the update site), GWT
SDK 2.3.0.
> >
> > The configuration does not work is:
> > Windows 7, Eclipse 3.6.2, Jdk 1.6.0_25,
Google plugin for
> > Eclipse 2.4.2,
> > GWT SDK 2.3.0.
> >
> > I still have not figured out yet if this
issue is a platform
> > specific one.
> >
> > Cheers,
> > Jervis
> >
> > Mikael Lönneberg wrote:
> > > Beta4 is the version on my classpath, I also tried
> deploying
> > the built
> > > WAR file on a standalone jboss as 7 server and
that failed
> > as well..
> > >
> > > /Mikael
> > >
> > > On Wed, Nov 2, 2011 at 5:21 PM, ge0ffrey
> > <ge0ffrey.spam(a)gmail.com
<mailto:ge0ffrey.spam@gmail.com>
> <mailto:ge0ffrey.spam@gmail.com
<mailto:ge0ffrey.spam@gmail.com>>
<mailto:ge0ffrey.spam@gmail.com
<mailto:ge0ffrey.spam@gmail.com>
> <mailto:ge0ffrey.spam@gmail.com
<mailto:ge0ffrey.spam@gmail.com>>>
> > > <mailto:ge0ffrey.spam@gmail.com
<mailto:ge0ffrey.spam@gmail.com>
> <mailto:ge0ffrey.spam@gmail.com
<mailto:ge0ffrey.spam@gmail.com>>
> > <mailto:ge0ffrey.spam@gmail.com
<mailto:ge0ffrey.spam@gmail.com>
> <mailto:ge0ffrey.spam@gmail.com
<mailto:ge0ffrey.spam@gmail.com>>>>> wrote:
> > >
> > > Master should be on seam beta4, which fixed that
> > logmanager thing
> > > from beta3
> > > Pls verify the seam version in your classpath
> > >
> > > --
> > > View this message in context:
> > >
> >
>
http://drools.46999.n3.nabble.com/Problem-setting-up-Guvnor-to-run-in-hos...
> > > Sent from the Drools: Developer (committer)
> mailing list
> > mailing
> > > list archive at Nabble.com.
> > > _______________________________________________
> > > rules-dev mailing list
> > > rules-dev(a)lists.jboss.org
<mailto:rules-dev@lists.jboss.org>
> <mailto:rules-dev@lists.jboss.org
<mailto:rules-dev@lists.jboss.org>>
> > <mailto:rules-dev@lists.jboss.org
<mailto:rules-dev@lists.jboss.org>
> <mailto:rules-dev@lists.jboss.org
<mailto:rules-dev@lists.jboss.org>>>
> > <mailto:rules-dev@lists.jboss.org
<mailto:rules-dev@lists.jboss.org>
> <mailto:rules-dev@lists.jboss.org
<mailto:rules-dev@lists.jboss.org>>
> > <mailto:rules-dev@lists.jboss.org
<mailto:rules-dev@lists.jboss.org>
> <mailto:rules-dev@lists.jboss.org
<mailto:rules-dev@lists.jboss.org>>>>
> > > https://lists.jboss.org/mailman/listinfo/rules-dev
> > >
> > >
> > >
> >
>
------------------------------------------------------------------------
> > >
> > > _______________________________________________
> > > rules-dev mailing list
> > > rules-dev(a)lists.jboss.org
<mailto:rules-dev@lists.jboss.org>
> <mailto:rules-dev@lists.jboss.org
<mailto:rules-dev@lists.jboss.org>>
> <mailto:rules-dev@lists.jboss.org
<mailto:rules-dev@lists.jboss.org>
<mailto:rules-dev@lists.jboss.org
<mailto:rules-dev@lists.jboss.org>>>
> > > https://lists.jboss.org/mailman/listinfo/rules-dev
> > >
> >
> >
_______________________________________________
> > rules-dev mailing list
> > rules-dev(a)lists.jboss.org
<mailto:rules-dev@lists.jboss.org>
> <mailto:rules-dev@lists.jboss.org
<mailto:rules-dev@lists.jboss.org>>
> <mailto:rules-dev@lists.jboss.org
<mailto:rules-dev@lists.jboss.org>
<mailto:rules-dev@lists.jboss.org
<mailto:rules-dev@lists.jboss.org>>>
> > https://lists.jboss.org/mailman/listinfo/rules-dev
> >
> >
> >
> > _______________________________________________
> > rules-dev mailing list
> > rules-dev(a)lists.jboss.org
<mailto:rules-dev@lists.jboss.org>
<mailto:rules-dev@lists.jboss.org
<mailto:rules-dev@lists.jboss.org>>
> <mailto:rules-dev@lists.jboss.org
<mailto:rules-dev@lists.jboss.org>
<mailto:rules-dev@lists.jboss.org
<mailto:rules-dev@lists.jboss.org>>>
> > https://lists.jboss.org/mailman/listinfo/rules-dev
> >
> >
> >
>
------------------------------------------------------------------------
> >
> > _______________________________________________
> > rules-dev mailing list
> > rules-dev(a)lists.jboss.org
<mailto:rules-dev@lists.jboss.org>
<mailto:rules-dev@lists.jboss.org
<mailto:rules-dev@lists.jboss.org>>
> > https://lists.jboss.org/mailman/listinfo/rules-dev
> >
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org
<mailto:rules-dev@lists.jboss.org>
<mailto:rules-dev@lists.jboss.org
<mailto:rules-dev@lists.jboss.org>>
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
>
>
------------------------------------------------------------------------
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org
<mailto:rules-dev@lists.jboss.org>
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org
<mailto:rules-dev@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/rules-dev
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/rules-dev
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-dev
--
With kind regards,
Geoffrey De Smet
4:38 a.m.
Yes, was going to already Geoffrey - it's on my Monday list :)
sent on the move
On 5 Nov 2011 09:00, "Geoffrey De Smet" <ge0ffrey.spam(a)gmail.com> wrote:
**
Can an Eclipse user adjust the README.md in droolsjbpm-build-bootstrap to
include this trick for the gwt configuration?
Op 04-11-11 21:31, Michael Anstis schreef:
Funny thing is, on checking, the "launch and deploy from this directory"
checkbox is not ticked for me!
On 4 November 2011 20:29, Michael Anstis <michael.anstis(a)gmail.com> wrote:
> Yay. Let me be the first to congratulate you :)
>
>
> On 4 November 2011 20:17, Mikael Lönneberg <emil(a)snickeboa.com> wrote:
>
>> Yeah! Success. It was the devious elusive "launch and deploy from this
>> directory" checkbox that did the trick.
>>
>> /Mikael
>>
>>
>> On Fri, Nov 4, 2011 at 10:24 AM, Mikael Lönneberg
<emil(a)snickeboa.com>wrote:
>>
>>> I did try with "This project has WAR directory" however I'm not
sure if
>>> I used the "Launch and deploy.. " option. I will have to check that
when I
>>> get home. But just using the WAR directory didn't work.
>>>
>>> /Mikael
>>>
>>>
>>> On Fri, Nov 4, 2011 at 9:51 AM, Jervis Liu <jliu(a)redhat.com> wrote:
>>>
>>>> Mikael Lönneberg wrote:
>>>> > Well that doesn't explain it on my Linux installation
unfortunately
>>>> > :(, as I'm not aware of a limitation in classpath on linux. I
tried
>>>> > running it with Eclipse Indigo yesterday but got the same errors.
>>>> Next
>>>> > step is trying to set it up on a completely different machine.
>>>> > How can I verify if this is the case?
>>>> >
>>>> Have you tried running Guvnor with War option? Google -> Web Toolkit
>>>> Settings -> Web Application, Check the checkbox "This project
has WAR
>>>> directory", then set WAR directory to
>>>> "target/guvnor-webapp-5.4.0-SNAPSHOT", also check the checkbox
"lunch
>>>> and deploy from this directory"
>>>>
>>>>
>>>> > /Mikael
>>>> >
>>>> > On Fri, Nov 4, 2011 at 8:32 AM, Jervis Liu <jliu(a)redhat.com
>>>> > <mailto:jliu@redhat.com>> wrote:
>>>> >
>>>> > Finally I found the problem. It is a "classpath too
long" on
>>>> Windows.
>>>> >
>>>> > Cheers,
>>>> > Jervis
>>>> >
>>>> > Michael Anstis wrote:
>>>> > > Me...
>>>> > >
>>>> > > droolsjbpm-ide-common
>>>> > > guvnor-repository
>>>> > > guvnor-repository-connector
>>>> > > guvnor-webapp
>>>> > >
>>>> > >
>>>> > > On 3 November 2011 11:35, Mikael Lönneberg
<emil(a)snickeboa.com
>>>> > <mailto:emil@snickeboa.com>
>>>> > > <mailto:emil@snickeboa.com
<mailto:emil@snickeboa.com>>>
>>>> wrote:
>>>> > >
>>>> > > Which projects do you have imported in Eclipse? Only
the
>>>> > ones from
>>>> > > the Guvnor repository or all drools projects?
>>>> > >
>>>> > > Kind Regards
>>>> > >
>>>> > > Mikael
>>>> > >
>>>> > > On Thu, Nov 3, 2011 at 12:08 PM, Jervis Liu <
>>>> jliu(a)redhat.com
>>>> > <mailto:jliu@redhat.com>
>>>> > > <mailto:jliu@redhat.com
<mailto:jliu@redhat.com>>> wrote:
>>>> > >
>>>> > > I've spent a day on this. What I found is that
I can
>>>> run
>>>> > > guvnor from
>>>> > > Eclipse using the WAR configuration as Mike
mentioned.
>>>> Below
>>>> > > is the
>>>> > > configuration that works:
>>>> > >
>>>> > > Linux, Eclipse 3.6.2, Jdk 1.6.0_29, Google plugin
for
>>>> > Eclipse
>>>> > > 2.4.2 (the
>>>> > > latest version from the update site), GWT SDK
2.3.0.
>>>> > >
>>>> > > The configuration does not work is:
>>>> > > Windows 7, Eclipse 3.6.2, Jdk 1.6.0_25, Google
plugin
>>>> for
>>>> > > Eclipse 2.4.2,
>>>> > > GWT SDK 2.3.0.
>>>> > >
>>>> > > I still have not figured out yet if this issue is
a
>>>> platform
>>>> > > specific one.
>>>> > >
>>>> > > Cheers,
>>>> > > Jervis
>>>> > >
>>>> > > Mikael Lönneberg wrote:
>>>> > > > Beta4 is the version on my classpath, I also
tried
>>>> > deploying
>>>> > > the built
>>>> > > > WAR file on a standalone jboss as 7 server and
that
>>>> failed
>>>> > > as well..
>>>> > > >
>>>> > > > /Mikael
>>>> > > >
>>>> > > > On Wed, Nov 2, 2011 at 5:21 PM, ge0ffrey
>>>> > > <ge0ffrey.spam(a)gmail.com
>>>> > <mailto:ge0ffrey.spam@gmail.com>
<mailto:ge0ffrey.spam@gmail.com
>>>> > <mailto:ge0ffrey.spam@gmail.com>>
>>>> > > > <mailto:ge0ffrey.spam@gmail.com
>>>> > <mailto:ge0ffrey.spam@gmail.com>
>>>> > > <mailto:ge0ffrey.spam@gmail.com
>>>> > <mailto:ge0ffrey.spam@gmail.com>>>> wrote:
>>>> > > >
>>>> > > > Master should be on seam beta4, which
fixed that
>>>> > > logmanager thing
>>>> > > > from beta3
>>>> > > > Pls verify the seam version in your
classpath
>>>> > > >
>>>> > > > --
>>>> > > > View this message in context:
>>>> > > >
>>>> > >
>>>> >
>>>>
http://drools.46999.n3.nabble.com/Problem-setting-up-Guvnor-to-run-in-hos...
>>>> > > > Sent from the Drools: Developer
(committer)
>>>> > mailing list
>>>> > > mailing
>>>> > > > list archive at Nabble.com.
>>>> > > >
_______________________________________________
>>>> > > > rules-dev mailing list
>>>> > > > rules-dev(a)lists.jboss.org
>>>> > <mailto:rules-dev@lists.jboss.org>
>>>> > > <mailto:rules-dev@lists.jboss.org
>>>> > <mailto:rules-dev@lists.jboss.org>>
>>>> > > <mailto:rules-dev@lists.jboss.org
>>>> > <mailto:rules-dev@lists.jboss.org>
>>>> > > <mailto:rules-dev@lists.jboss.org
>>>> > <mailto:rules-dev@lists.jboss.org>>>
>>>> > > >
>>>> https://lists.jboss.org/mailman/listinfo/rules-dev
>>>> > > >
>>>> > > >
>>>> > > >
>>>> > >
>>>> >
>>>> ------------------------------------------------------------------------
>>>> > > >
>>>> > > >
_______________________________________________
>>>> > > > rules-dev mailing list
>>>> > > > rules-dev(a)lists.jboss.org
>>>> > <mailto:rules-dev@lists.jboss.org>
>>>> > <mailto:rules-dev@lists.jboss.org <mailto:
>>>> rules-dev(a)lists.jboss.org>>
>>>> > > >
https://lists.jboss.org/mailman/listinfo/rules-dev
>>>> > > >
>>>> > >
>>>> > > _______________________________________________
>>>> > > rules-dev mailing list
>>>> > > rules-dev(a)lists.jboss.org
>>>> > <mailto:rules-dev@lists.jboss.org>
>>>> > <mailto:rules-dev@lists.jboss.org <mailto:
>>>> rules-dev(a)lists.jboss.org>>
>>>> > > https://lists.jboss.org/mailman/listinfo/rules-dev
>>>> > >
>>>> > >
>>>> > >
>>>> > > _______________________________________________
>>>> > > rules-dev mailing list
>>>> > > rules-dev(a)lists.jboss.org <mailto:
>>>> rules-dev(a)lists.jboss.org>
>>>> > <mailto:rules-dev@lists.jboss.org <mailto:
>>>> rules-dev(a)lists.jboss.org>>
>>>> > > https://lists.jboss.org/mailman/listinfo/rules-dev
>>>> > >
>>>> > >
>>>> > >
>>>> >
>>>> ------------------------------------------------------------------------
>>>> > >
>>>> > > _______________________________________________
>>>> > > rules-dev mailing list
>>>> > > rules-dev(a)lists.jboss.org
<mailto:rules-dev@lists.jboss.org>
>>>> > > https://lists.jboss.org/mailman/listinfo/rules-dev
>>>> > >
>>>> >
>>>> > _______________________________________________
>>>> > rules-dev mailing list
>>>> > rules-dev(a)lists.jboss.org
<mailto:rules-dev@lists.jboss.org>
>>>> > https://lists.jboss.org/mailman/listinfo/rules-dev
>>>> >
>>>> >
>>>> >
>>>> ------------------------------------------------------------------------
>>>> >
>>>> > _______________________________________________
>>>> > rules-dev mailing list
>>>> > rules-dev(a)lists.jboss.org
>>>> > https://lists.jboss.org/mailman/listinfo/rules-dev
>>>> >
>>>>
>>>> _______________________________________________
>>>> rules-dev mailing list
>>>> rules-dev(a)lists.jboss.org
>>>> https://lists.jboss.org/mailman/listinfo/rules-dev
>>>>
>>>
>>>
>>
>> _______________________________________________
>> rules-dev mailing list
>> rules-dev(a)lists.jboss.org
>> https://lists.jboss.org/mailman/listinfo/rules-dev
>>
>>
>
_______________________________________________
rules-dev mailing
listrules-dev@lists.jboss.orghttps://lists.jboss.org/mailman/listinfo/rules-dev
--
With kind regards,
Geoffrey De Smet
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-dev
5:14 a.m.
tnx :)
Op 05-11-11 10:38, Michael Anstis schreef:
Yes, was going to already Geoffrey - it's on my Monday list :)
sent on the move
On 5 Nov 2011 09:00, "Geoffrey De Smet" <ge0ffrey.spam(a)gmail.com
<mailto:ge0ffrey.spam@gmail.com>> wrote:
Can an Eclipse user adjust the README.md in
droolsjbpm-build-bootstrap to include this trick for the gwt
configuration?
Op 04-11-11 21:31, Michael Anstis schreef:
> Funny thing is, on checking, the "launch and deploy from this
> directory" checkbox is not ticked for me!
>
> On 4 November 2011 20:29, Michael Anstis
> <michael.anstis(a)gmail.com <mailto:michael.anstis@gmail.com>> wrote:
>
> Yay. Let me be the first to congratulate you :)
>
>
> On 4 November 2011 20:17, Mikael Lönneberg
> <emil(a)snickeboa.com <mailto:emil@snickeboa.com>> wrote:
>
> Yeah! Success. It was the devious elusive "launch and
> deploy from this directory" checkbox that did the trick.
>
> /Mikael
>
>
> On Fri, Nov 4, 2011 at 10:24 AM, Mikael Lönneberg
> <emil(a)snickeboa.com <mailto:emil@snickeboa.com>> wrote:
>
> I did try with "This project has WAR directory"
> however I'm not sure if I used the "Launch and
> deploy.. " option. I will have to check that when I
> get home. But just using the WAR directory didn't work.
>
> /Mikael
>
>
> On Fri, Nov 4, 2011 at 9:51 AM, Jervis Liu
> <jliu(a)redhat.com <mailto:jliu@redhat.com>> wrote:
>
> Mikael Lönneberg wrote:
> > Well that doesn't explain it on my Linux
> installation unfortunately
> > :(, as I'm not aware of a limitation in
> classpath on linux. I tried
> > running it with Eclipse Indigo yesterday but
> got the same errors. Next
> > step is trying to set it up on a completely
> different machine.
> > How can I verify if this is the case?
> >
> Have you tried running Guvnor with War option?
> Google -> Web Toolkit
> Settings -> Web Application, Check the checkbox
> "This project has WAR
> directory", then set WAR directory to
> "target/guvnor-webapp-5.4.0-SNAPSHOT", also check
> the checkbox "lunch
> and deploy from this directory"
>
>
> > /Mikael
> >
> > On Fri, Nov 4, 2011 at 8:32 AM, Jervis Liu
> <jliu(a)redhat.com <mailto:jliu@redhat.com>
> > <mailto:jliu@redhat.com
> <mailto:jliu@redhat.com>>> wrote:
> >
> > Finally I found the problem. It is a
> "classpath too long" on Windows.
> >
> > Cheers,
> > Jervis
> >
> > Michael Anstis wrote:
> > > Me...
> > >
> > > droolsjbpm-ide-common
> > > guvnor-repository
> > > guvnor-repository-connector
> > > guvnor-webapp
> > >
> > >
> > > On 3 November 2011 11:35, Mikael Lönneberg
> <emil(a)snickeboa.com <mailto:emil@snickeboa.com>
> > <mailto:emil@snickeboa.com
> <mailto:emil@snickeboa.com>>
> > > <mailto:emil@snickeboa.com
> <mailto:emil@snickeboa.com>
> <mailto:emil@snickeboa.com
> <mailto:emil@snickeboa.com>>>> wrote:
> > >
> > > Which projects do you have imported in
> Eclipse? Only the
> > ones from
> > > the Guvnor repository or all drools projects?
> > >
> > > Kind Regards
> > >
> > > Mikael
> > >
> > > On Thu, Nov 3, 2011 at 12:08 PM, Jervis
> Liu <jliu(a)redhat.com <mailto:jliu@redhat.com>
> > <mailto:jliu@redhat.com
<mailto:jliu@redhat.com>>
> > > <mailto:jliu@redhat.com
> <mailto:jliu@redhat.com> <mailto:jliu@redhat.com
> <mailto:jliu@redhat.com>>>> wrote:
> > >
> > > I've spent a day on this. What I
> found is that I can run
> > > guvnor from
> > > Eclipse using the WAR configuration
> as Mike mentioned. Below
> > > is the
> > > configuration that works:
> > >
> > > Linux, Eclipse 3.6.2, Jdk 1.6.0_29,
> Google plugin for
> > Eclipse
> > > 2.4.2 (the
> > > latest version from the update site),
> GWT SDK 2.3.0.
> > >
> > > The configuration does not work is:
> > > Windows 7, Eclipse 3.6.2, Jdk
> 1.6.0_25, Google plugin for
> > > Eclipse 2.4.2,
> > > GWT SDK 2.3.0.
> > >
> > > I still have not figured out yet if
> this issue is a platform
> > > specific one.
> > >
> > > Cheers,
> > > Jervis
> > >
> > > Mikael Lönneberg wrote:
> > > > Beta4 is the version on my classpath, I
> also tried
> > deploying
> > > the built
> > > > WAR file on a standalone jboss as 7 server
> and that failed
> > > as well..
> > > >
> > > > /Mikael
> > > >
> > > > On Wed, Nov 2, 2011 at 5:21 PM, ge0ffrey
> > > <ge0ffrey.spam(a)gmail.com
> <mailto:ge0ffrey.spam@gmail.com>
> > <mailto:ge0ffrey.spam@gmail.com
> <mailto:ge0ffrey.spam@gmail.com>>
> <mailto:ge0ffrey.spam@gmail.com
> <mailto:ge0ffrey.spam@gmail.com>
> > <mailto:ge0ffrey.spam@gmail.com
> <mailto:ge0ffrey.spam@gmail.com>>>
> > > > <mailto:ge0ffrey.spam@gmail.com
> <mailto:ge0ffrey.spam@gmail.com>
> > <mailto:ge0ffrey.spam@gmail.com
> <mailto:ge0ffrey.spam@gmail.com>>
> > > <mailto:ge0ffrey.spam@gmail.com
> <mailto:ge0ffrey.spam@gmail.com>
> > <mailto:ge0ffrey.spam@gmail.com
> <mailto:ge0ffrey.spam@gmail.com>>>>> wrote:
> > > >
> > > > Master should be on seam beta4, which
> fixed that
> > > logmanager thing
> > > > from beta3
> > > > Pls verify the seam version in your
> classpath
> > > >
> > > > --
> > > > View this message in context:
> > > >
> > >
> >
>
http://drools.46999.n3.nabble.com/Problem-setting-up-Guvnor-to-run-in-hos...
> > > > Sent from the Drools: Developer (committer)
> > mailing list
> > > mailing
> > > > list archive at Nabble.com.
> > > >
> _______________________________________________
> > > > rules-dev mailing list
> > > > rules-dev(a)lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>
> > <mailto:rules-dev@lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>>
> > > <mailto:rules-dev@lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>
> > <mailto:rules-dev@lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>>>
> > > <mailto:rules-dev@lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>
> > <mailto:rules-dev@lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>>
> > > <mailto:rules-dev@lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>
> > <mailto:rules-dev@lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>>>>
> > > >
> https://lists.jboss.org/mailman/listinfo/rules-dev
> > > >
> > > >
> > > >
> > >
> >
>
------------------------------------------------------------------------
> > > >
> > > > _______________________________________________
> > > > rules-dev mailing list
> > > > rules-dev(a)lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>
> > <mailto:rules-dev@lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>>
> > <mailto:rules-dev@lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>
> <mailto:rules-dev@lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>>>
> > > >
> https://lists.jboss.org/mailman/listinfo/rules-dev
> > > >
> > >
> > >
> _______________________________________________
> > > rules-dev mailing list
> > > rules-dev(a)lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>
> > <mailto:rules-dev@lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>>
> > <mailto:rules-dev@lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>
> <mailto:rules-dev@lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>>>
> > >
> https://lists.jboss.org/mailman/listinfo/rules-dev
> > >
> > >
> > >
> > >
> _______________________________________________
> > > rules-dev mailing list
> > > rules-dev(a)lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>
> <mailto:rules-dev@lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>>
> > <mailto:rules-dev@lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>
> <mailto:rules-dev@lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>>>
> > >
> https://lists.jboss.org/mailman/listinfo/rules-dev
> > >
> > >
> > >
> >
>
------------------------------------------------------------------------
> > >
> > > _______________________________________________
> > > rules-dev mailing list
> > > rules-dev(a)lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>
> <mailto:rules-dev@lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>>
> > >
> https://lists.jboss.org/mailman/listinfo/rules-dev
> > >
> >
> > _______________________________________________
> > rules-dev mailing list
> > rules-dev(a)lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>
> <mailto:rules-dev@lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>>
> > https://lists.jboss.org/mailman/listinfo/rules-dev
> >
> >
> >
>
------------------------------------------------------------------------
> >
> > _______________________________________________
> > rules-dev mailing list
> > rules-dev(a)lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>
> > https://lists.jboss.org/mailman/listinfo/rules-dev
> >
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org
> <mailto:rules-dev@lists.jboss.org>
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
>
>
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
> https://lists.jboss.org/mailman/listinfo/rules-dev
>
>
>
>
> _______________________________________________
> rules-dev mailing list
> rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
> https://lists.jboss.org/mailman/listinfo/rules-dev
--
With kind regards,
Geoffrey De Smet
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org <mailto:rules-dev@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/rules-dev
_______________________________________________
rules-dev mailing list
rules-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-dev
--
With kind regards,
Geoffrey De Smet
5180
days inactive
5183
days old
24 comments
5 participants
participants (5)
-
ge0ffrey -
Geoffrey De Smet
-
Jervis Liu -
Michael Anstis -
Mikael Lönneberg